Numerical simulation of three-dimensional separated flow and heat transfer around staggered surface-mounted rectangular blocks in a channel

Numerical Heat Transfer; Part A: Applications

Volumn 47, Issue 7, 2005, Pages 691-708

  Nakajiina, Madoka ^a   Yanaoka, Hideki ^b   Yoshikawa, Hiroyuki ^c   Ota, Terukazu ^c  

^a KANAZAWA INSTITUTE OF TECHNOLOGY   (Japan)

^b HIROSAKI UNIVERSITY   (Japan)

^c TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; ELECTRONIC EQUIPMENT; FINITE DIFFERENCE METHOD; HEAT EXCHANGERS; LAMINAR FLOW; NAVIER STOKES EQUATIONS; REYNOLDS NUMBER; THREE DIMENSIONAL;

FLUID MACHINERY; HORSESHOE VORTICES; PLANE CHANNEL; RECIRCULATING FLOW;

HEAT TRANSFER;

EID: 17444431197     PISSN: 10407782     EISSN: None     Source Type: Journal    
DOI: 10.1080/10407780590911558     Document Type: Article

References (34)

1. C. J. Baker, The Laminar Horseshoe Vortex, J. Fluid Mech., vol. 95, pp. 347-367, 1979.
2. R. J. Goldstein, M. K. Chyu, and R. C. Hain, Measurement of Local Mass Transfer on a Surface in the Region of the Base of a Protruding Cylinder with a Computer-Controlled Data Acquisition System, Int. J. Heat Mass Transfer, vol. 28, pp. 977-985, 1985.
3. H. Sakamoto and H. Haniu, Arch-Type Vortex Formed behind a Normal Plate Placed in a Laminar Boundary Layer, Trans. Jpn. Soc. Mech. Eng., vol. 52B, pp. 290-297, 1986.
4. E. M. Fisher and P. A. Eibeck, The Influence of a Horseshoe Vortex on Local Convective Heat Transfer, Trans. ASME, J. Heat Transfer, vol. 112, pp. 329-335, 1990.
5. C. J. Baker, The Oscillation of Horseshoe Vortex Systems, Trans. ASME, J. Fluids Eng., vol. 113, pp. 489-495, 1991.
6. M. K. Chyu and V. Natarajan, Local Heat/Mass Transfer Distributions on the Surface of a Wall-Mounted Cube, Trans. ASME, J. Heat Transfer, vol. 113, pp. 851-857, 1991.
7. V. Natarajan and M. K. Chyu, Effect of Flow Angle-of-Attack on the Local Heat/Mass Transfer from a Wall-Mounted Cube, Trans. ASME, J. Heat Transfer, vol. 116, pp. 552-560, 1994.
8. C. V. Seal, C. R. Smith, O. Akin, and D. Rockwell, Quantitative Characteristics of a Laminar, Unsteady Necklace Vortex System at a Rectangular Block-Flat Plate Juncture, J. Fluid Mech., vol. 286, pp. 117-135, 1995.
9. C. D. Tropea and R. Gackstatter, The Flow over Two-Dimensional Surface-Mounted Obstacles at Low Reynolds Numbers, Trans. ASME, J. Fluids Eng., vol. 107, pp. 489-494, 1985.
10. J. Davalath and Y. Bayazitoglu, Forced Convection Cooling across Rectangular Blocks, Trans. ASME, J. Heat Transfer, vol. 109, pp. 321-328, 1987.
11. H. J. Shaw, W. L. Chen, and C. K. Chen, Study on the Laminar Mixed Convective Heat Transfer in Three-Dimensional Channel with a Thermal Source, Trans. ASME, J. Electron. Pkging., vol. 113, pp. 40-49, 1991.
12. S. Y. Kim, H. J. Sung, and J. M. Hyun, Mixed Convection from Multiple-Layered Boards with Cross-Streamwise Periodic Boundary Conditions, Int. J. Heat Mass Transfer, vol. 35, pp. 2941-2952, 1992.
13. T. Ota and Y. Kaga, Numerical Analysis of Laminar Heat Transfer around a Surface Step, Proc. Heat Transfer 3rd UK Natl. Conf. Incorporating 1st European Conf. on Thermal Science, Birmingham, UK, vol. 2, pp. 797-804, Institution of Chemical Engineers, Warwickshire, UK, 1992.
14. K. Matsubara, K. Suzuki, E. B. Treidler, H. Suzuki, and Y. Mae, Unsteady Flow and Heat Transfer in a Channel with Two Ribs Attached to One Wall, Proc. 10th Int. Heat Transfer Conf., Brighton, UK, vol. 6, pp. 73-78, Institution of Chemical Engineers, Warwickshire, UK, 1994.
15. T. Ota, H. Yanaoka, and M. Nakajima, Numerical Analysis of Laminar Flow and Heat Transfer around a Surface-Mounted Hexahedron, Proc. ASME/JSME Thermal Eng. Joint Conf., Maui, HI, vol. 1, pp. 313-320, ASME, New York, 1995.
16. G. K. Morris and S. V. Garimella, Thermal Wake Downstream of a Three-Dimensional Obstacle, Exp. Thermal Fluid Sci., vol. 12, pp. 65-74, 1996.
17. M. Nakajima, T. Ota, and H. Yanaoka, Numerical Simulation of Unsteady Flow and Heat Transfer around a Surface Step, Proc. Transport Phenomena in Thermal Science Process Engineering, Kyoto, Japan, vol. 1, pp. 233-237, Pacific Center of Thermal-Fluids Engineering, Honolulu, HI, 1997.
18. M. Nakajima and T. Ota, Numerical Simulation of Three Dimensional Unsteady Flow and Heat Transfer around a Surface-Mounted Hexahedron in a Channel, Proc. 11th Int. Heat Transfer Conf., Kyongju, Korea, vol. 3, pp. 133-138, Korean Society of Mechanical Engineers, Seoul, Korea, 1998.
19. M. Nakajima, H. Yanaoka, and T. Ota, Three-Dimensional Numerical Analysis of Flow and Heat Transfer around a Surface-Mounted Hexahedron in a Channel, Trans. Jpn. Soc. Mech. Eng., 64B, pp. 4116-4121, 1998.
20. T. Ota, M. Nakajima, and H. Yanaoka, Numerical Analysis of Two-Dimensional Unsteady Laminar Flow and Heat Transfer around a Rectangular Cylinder on a Surface, Trans. Jpn. Soc. Mech. Eng., vol. 64B, pp. 226-231, 1998.
21. M. Nakajima and T. Ota, Numerical Analysis of Three-Dimensional Unsteady Flow and Heat Transfer around a Surface-Mounted Hexahedron in a Channel, Trans. Jpn. Soc. Mech. Eng., vol. 65B, pp. 3111-3116, 1999.
22. E. M. Sparrow, A. A. Yanezmoreno, and D. R. Otis, Jr., Convective Heat Transfer Response to Height Differences in an Array of Block-like Electronic Components, Int. J. Heat Mass Transfer, vol. 27, pp. 469-473, 1984.
23. Y. Asako and M. Faghri, Three-Dimensional Heat Transfer Analysis of Arrays of Heated Square Blocks, Int. J. Heat Mass Transfer, vol. 32, pp. 395-405, 1989.
24. S. V. Garimella and P. A. Eibeck, Heat Transfer Characteristics of an Array of Protruding Elements in Single Phase Forced Convection, Int. J. Heat Mass Transfer, vol. 33, pp. 2659-2669, 1990.
25. S. V. Garimella and P. A. Eibeck, Fluid Dynamic Characteristics of the Flow over an Array of Large Roughness Elements. Trans. ASME, J. Electron. Pkging., vol. 113, pp. 367-373, 1991.
26. G. L. Lehmann and J. Pembroke, Forced Convection Air Cooling of Simulated Low Profile Electronic Components: Pt. 1 Base Case, Trans. ASME, J. Electron. Pkging., vol. 113, pp. 21-26, 1991.
27. A. M. Anderson and R. J. Moffat, The Adiabatic Heat Transfer Coefficient and the Superposition Kernel Function: Pt. 2 Modeling Flatpack Data as a Function of Channel Turbulence, Trans. ASME, J. Electron. Pkging., vol. 114, pp. 22-28, 1992.
28. S. Okamoto, T. Katsumata, N. Abe, and M. Kijima, Flow past Repeated Ribs of a Square Section Mounted on a Ground Plate, Trans. Jpn. Soc. Mech. Eng., vol. 63B, pp. 3834-3842, 1997.
29. E. R. Meinders, T. H. Van Der Meer, and K. Hanjalic, Local Convective Heat Transfer from an Array of Wall-Mounted Cube, Int. J. Heat Mass Transfer, vol. 41, pp. 335-346, 1998.
30. T. Ota and H. Yanaoka, Numerical Analysis of a Separated and Reattached Flow over a Blunt Flat Plate, Proc. 5th Int. Symp. on Computational Fluid Dynamics, Sendai, Japan, vol. 3, pp. 423-428, Japan Society of Computational Fluid Dynamics, Tokyo, Japan, 1993.
31. H. Yanaoka, H. Yoshikawa, and T. Ota, Numerical Simulation of Laminar Flow and Heat Transfer over a Blunt Flat Plate in Square Channel, Trans. ASME, J. Heat Transfer, vol. 124, pp. 8-16, 2002.
32. A. A. Amsden and F. H. Harlow, A Simplified MAC Technique for Incompressible Fluid Flow Calculations, J. Comput. Phys., vol. 6, pp. 322-325, 1970.
33. M. Nakajima, K. Ueda, M. Mori, Y. Ito, and T. Ota, Horseshoe Vortices around Surface-Mounted Rectangular Blocks, Proc. PSFVIP-3, Maui, HI, Paper F3008, Japan Society of Mechanical Engineers, Tokyo, Japan, 2001.
34. M. Nakajima, H. Yanaoka, H. Yoshikawa, and T. Ota, Numerical Simulation of Three-Dimensional Separated Flow and Heat Transfer around an Array of Surface-Mounted Rectangular Blocks in a Channel, Proc. ASME FEDSM00, Boston, Paper FEDSM00-11003, ASME, New York, 2000.