Modeling of workpiece location error due to fixture geometric error and fixture-workpiece compliance

Journal of Manufacturing Science and Engineering

Volumn 127, Issue 1, 2005, Pages 75-83

  Raghu, Anand ^a   Melkote, Shreyes N ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; ELASTICITY; ERROR ANALYSIS; GEOMETRY; MACHINING; QUALITY ASSURANCE;

CONTACT MECHANICS; FIXTURE-WORKPIECE COMPLIANCE; GEOMETRIC ERRORS; WORKPIECE LOCATION ERROR;

FIXTURES (TOOLING);

EID: 17444419336     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1828052     Document Type: Article

References (29)

1. Weill, R., Dar-El, I., and Laloum, M., 1991, "The Influence of Fixture Positioning Errors on the Geometric Accuracy of Mechanical Parts," Proc. of CIRP Conference on PE & MS, Sept., Tianjin, China, pp. 215-225.
2. Jayaram, S., El-Khasawneh, B. S., and Beutel, D. E., 2000, "A Fast Analytical Method to Compute Optimum Stiffness of Fixturing Locators," CIRP Ann., 49, pp. 317-320.
3. Carlson, J. S., 2001, "Quadratic Sensitivity Analysis of Fixture and Locating Schemes for Rigid Parts," ASME J. Manuf. Sci. Eng., 123, pp. 462-472.
4. Tao, Z. J., Kumar, S. A., and Nee, Y. C., 1999, "Automatic Generation of Dynamic Clamping Forces for Machining Fixtures," Int. J. Prod. Res., 37(12), pp. 2755-2776.
5. Hockenberger, M. J., and De Meter, E. C., 1996, "The Application of Meta Functions on the Quasi-Static Analysis of Workpiece Displacement Within a Machining Fixture," ASME J. Manuf. Sci. Eng., 118, pp. 325-331.
6. Choudhuri, S. A., and De Meter, E. C., 1999, "Tolerance Analysis of Machining Fixture Locators," ASME J. Manuf. Sci. Eng., 121, pp. 273-281.
7. Rong, Y., Li, W., and Bai, Y., 1995, "Locating Error Analysis for Computer-Aided Fixture Design and Verification," Proc. the Computer in Engineering Conference and the Engineering Database Symposium, ASME, New York, pp. 825-832.
8. Cai, W., Hu, S. J., and Yuan, J. X., 1997, "A Variational Method of Robust Fixture Configuration Design for 3-D Workpiece," ASME J. Manuf. Sci. Eng., 199, pp. 593-602.
9. Long, Y., Hu, S. J., and Soderberg, R., 2002, "Incorporating Fixture Variation in Compliant Assembly Variation Analysis," CD-ROM Proc. the Japan-USA Symposium for Flexible Automation, July, Hiroshima, Japan, pp. 1-8.
10. Salisbury, E. J., and Peters, F. E., 1998, "The Impact of Surface Errors on Fixtured Workpiece Location and Orientation," Trans. NAMRI/SME, 26, pp. 323-328.
11. Johnson, K. L., Contact Mechanics, 1985, Cambridge University Press, Cambridge, pp. 57-63 and 85-95.
12. Hockenberger, M. J., and De Meter, E. C., 1993, "Preliminary Experimentation and Modeling of Workpiece Displacement During Machining," Trans. NAMRI/SME, XXI, pp. 351-357.
13. Satyanarayana, S., 2001 "Fixture-Workpiece Contact Modeling for a Compliant Workpiece" MS. thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta.
14. Hurtado, J. F., and Melkote, S. N., 1998, "A Model for the Estimation of Reaction Forces in a 3-2-1 Machining Fixture," Trans. NAMRI/SME, 26, pp. 335-340.
15. Li, B., and Melkote, S. N., 1999, "An Elastic Contact Model for the Prediction of Workpiece-Fixture Contact Forces in Clamping," ASME J. Manuf. Sci. Eng., 121(3), pp. 485-493.
16. Xiuwen, O., Fuh, J. Y. H, and Nee, A. Y. C., 1996, "Modeling of Frictional Elastic Fixture-Workpiece System for Improving Location Accuracy," IEE Trans., 28, pp. 821-827.
17. Lee, J. D., and Haynes, L. S., 1987, "Finite-Element Analysis of Flexible Fixturing System," ASME J. Eng. Ind., 109, pp. 134-139.
18. Menassa, R. J., and DeVries, W. R., 1991, "Optimization Methods Applied to Selecting Support Positions in Fixture Design," ASME J. Eng. Ind., 113(4), pp. 412-418.
19. Subramani, G., Kapoor, S. G., and DeVor, R. E., 1993, "A Model for the Prediction of Bore Cylindricity During Machining," ASME J. Eng. Ind., 115, pp. 15-22.
20. Liao, Y. G., and Hu, S. J., 2001, "An Integrated Model of a Fixture-Workpiece System for Surface Quality Prediction," Int. J. Adv. Manuf. Technol., 17, pp. 810-818.
21. De Meter, E. C., Xie, W., Choudhuri, S., Vallapuzha, S., and Trethewey, M. W., 2001, "A Model to Predict Minimum Required Clamp Pre-loads in Light of Fixture-Workpiece Compliance," Int. J. Mach. Tools Manuf., 41, pp. 1031-1054.
22. Zhong, W., Huang, Y., and Hu, S. J., 2002, "Modeling Variation Propagation in Machining Systems with Different Configurations," Proc. ASME, Nov. 17-22, New Orleans, pp. 97-106.
23. Faux, I. D., and Pratt, M. J., 1979, Computational Geometry for Design and Manufacture, Ellis Horwood, Chichester, pp. 69-84,
24. Li, B., and Melkote, S. N., 2001, "Fixture Clamping Force Optimization and its Impact on Workpiece Location Accuracy," Int. J. Adv. Manuf. Technol., 17, pp. 104-113.
25. Gere, J. M., and Timoshenko, S. P., 1997, "Mechanics of Materials," PWS Publishing, Boston, pp. 66-80 and 420-438.
26. Boldt, J., 1991, "Clamping Technology Vital to Productivity," Tooling Prod., Nov., pp. 29-36.
27. Richards, T. H., 1977, Energy Methods in Stress Analysis, Ellis Hardwood, Chichester, pp. 38-61 and 254-263.
28. Jacobson, B., and Kalker, J. J., 2000, Rolling Contact Phenomena, Springer-Wien, NewYork, pp. 19-57.
29. Raghu, A., 2003 "Prediction of Workpiece Location as Function of Fixture-Induced Errors" MS. thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta.