Extruded high-strength solid materials based on magnesium with zinc, yttrium, and cerium additives

Glass Physics and Chemistry

Volumn 31, Issue 1, 2005, Pages 44-52

  Guo, X ^a   Shechtman, D ^b  

^a XI'AN UNIVERSITY OF TECHNOLOGY   (China)

^b TECHNION ISRAEL INSTITUTE OF TECHNOLOGY   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIVES; AEROSPACE ENGINEERING; CERIUM; ENERGY DISPERSIVE SPECTROSCOPY; MAGNESIUM PRINTING PLATES; MICROSTRUCTURE; SCANNING ELECTRON MICROSCOPY; VEHICLE PARTS AND EQUIPMENT; X RAY ANALYSIS; X RAY DIFFRACTION ANALYSIS; YTTRIUM; ZINC;

FINE-GRAINED STRUCTURE; HIGH-STRENGTH SOLID MATERIALS; LARGE SIZED GRAINS; SOLID-SOLUTION GRAINS;

STRENGTH OF MATERIALS;

EID: 17144419665     PISSN: 10876596     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10720-005-0023-y     Document Type: Conference Paper

References (24)

1. Baikov, A.A., Magnievye splavy s ittriem (Magnesium ' Alloys with Yttrium), Moscow: Nauka, 1979.
2. Antion, C., Donnadieu, P., Perrard, F., Deschamps, A., Tassin, C., and Pisch, A., Hardening Precipitation in Mg-4Y-3Re Alloy, Acta Mater.,2003, vol. 51, no. 18, pp. 5335-5348.
3. Singh Alok, Nakamura, M., Watanabe, M., Kato, A., and Tsai, A.P., Quasicrystal Strengthened Mg-Zn-Y Alloys by Extrusion, Scr. Mater., 2003, vol. 49, no. 5, pp. 417-422.
4. Ravi Kumar, N.V., Blandin, J.J., Suéry, M., and Grosiean, E., Effect of Elements on the Ignition Resistance of Magnesium Alloys, Scr. Mater., 2003, vol. 49, no. 3, pp. 225-230.
5. Singh Alok and Tsai, A.P., On the Cubic W Phase and Its Relationship to the Icosahedral Phase in Mg-Zn-Y Alloys, Scr. Mater., 2003, vol. 49, no. 2, pp. 143-148.
6. Avedesian, M.M. and Baker, H., Magnesium and Magnesium Alloys, Materials Park, Ohio: The Materials Information Society, 1999, pp. 15-20, 53-77.
7. Kubota, K., Mabuchi, M., and Higashi, K., Processing and Mechanical Properties of Fine-Grained Magnesium Alloys, J. Mater. Sci., 1999, vol. 34, no. 10, pp. 2255-2262.
8. Froes, F.H. and Ward-Close, C.M., Processing of Light Metals for Enhanced Performance, J. Mater. Proc. Technol., 1995, vol. 48, pp. 667-673.
9. Krishnamurthy, S., Robertson, E., and Froes, F.G., Rapidly Solidified Magnesium Alloys Containing Rare Earth Additions, in Advances in Magnesium Alloys and Compositions, Paris, H. and Hunt, W.H., Eds., The Minerals, Metals, and Materials Society, 1988, pp. 77-88.
10. Jackson, K.A., Seward, T.P., et al., On the Origin of the Equiaxed Zone in Castings, Trans. Metall. Soc. AIME, 1966, pp. 149-158.
11. Nayeb-Hashemi, A.A. and Clare, J.B., in Phase Diagrams of Binary Magnesium Alloys, Metals Park, Ohio: ASM International, 1988, pp. 878-880.
12. Aziz, M.J., Model for Solute Redistribution: During Rapid Solidification, J. Appl. Phys., 1982, vol. 53, no. 2, pp. 1158-1168.
13. Boettinger, W.J., Coriell, S.R., and Trivedi, R., in Rapid Solidification Processing: Principle and Technologies IV, Mehrabian, R. and Parrish, P.A., Eds., Baton Rouge, LA: Claitor, 1988, p. 13.
14. Willnecker, R., Herlach, D.M., and Feuerbacher, B., Evidence of Nonequilibrium Processes in Rapid Solidification of Undercooled Metals, Phys. Rev. Lett., 1989, vol. 62, no. 5, pp. 2707-2710.
15. Kattamis, T.Z. and Flemings, M.C., Dendrite Structure and Grain Size of Undercooled Melts, Trans. Metall. Soc. AIME, 1966, vol. 236, pp. 1523-1532.
16. Wu, Y., Piccone, T.J., Shiohara, Y., and Fleming, M.C., Dendritic Growth of Undercooled Nickel-Tin: Part I, Metall. Trans. A, 1987, vol. 18, pp. 915-924; Piccone, T.J., Wu, Y., Shiohara, Y., and Fleming, M.C., Dendritic Growth of Undercooled Nickel-Tin: Part II, Metall. Trans. A, 1987, vol. 18, pp. 925-932.
17. Wu, Y., Piccone, T.J., Shiohara, Y., and Fleming, M.C., Dendritic Growth of Undercooled Nickel-Tin: Part I, Metall. Trans. A, 1987, vol. 18, pp. 915-924; Piccone, T.J., Wu, Y., Shiohara, Y., and Fleming, M.C., Dendritic Growth of Undercooled Nickel-Tin: Part II, Metall. Trans. A, 1987, vol. 18, pp. 925-932.
18. Mabuchi, M. and Higashi, K., Strengthening Mechanisms of Mg-Si Alloys, Acta Mater., 1996, vol. 44, no. 11, pp. 4611-4618.
19. Lucac, P., Synergetic Effects in Simultaneous Strengthening and Plasticizing of Magnesium Based Alloys, in Proceedings of the 1th Israel Conference on Magnesium Science and Technology "Magnesium-97," Aghion, E. and Eliezer, D., Eds., Beer-Sheva, 1997, p. 139-144.
20. Shaw, C. and Jones, H., Structure and Mechanical Properties of Two Mg-Al-Ca Alloys Consolidated from Atomized Powder, Mater. Sci. Technol., 1999, vol. 15, pp. 78-84.
21. Shibata, T., Kavanishi, J., Nagahora, J., Inoue, A., and Masumoto, T., High Specific Strength of Extruded Mg-Al-Ge Alloys Produced by Rapid Solidification Processing, Mater. Sci. Eng., A, 1994, vols. 179-180, pp. 632-636.
22. Miyazaki, T., Kaneko, J., and Sugamata, M., Structures and Proportions of Rapidly Solidified Mg-Ca Alloys, Mater. Sci. Eng., A, 1994, vols. 181-182, pp. 1410-1414.
23. Shaw, C. and Jones, H., The Contributions of Different Alloying Additions in Rapidly Solidified Magnesium Alloys, Mater. Sci. Eng., A, 1997, vols. 226-228, pp. 856-860.
24. 20 Alloys Produced by Extrusion of Atomized Powders, Mater. Sci. Eng., A, 1994, vols. 179-180, pp. 707-711.