Effect of HCl on the corrosion and wear of in-bed tubes in a laboratory simulated bubbling fluidized bed

Wear

Volumn 233-235, Issue , 1999, Pages 635-646

  Hou, P Y ^a   Niu, Y ^a,b   Sum, T J ^a   Stringer, J ^a,c  

^a LAWRENCE BERKELEY NATIONAL LABORATORY   (United States)

^b INSTITUTE OF GEOLOGY AND GEOPHYSICS   (China)

^c ELECTRIC POWER RESEARCH INSTITUTE   (United States)

Author keywords

Corrosion; In bed tube; Wear

Indexed keywords

CARBON STEEL; CHEMICAL ANALYSIS; FLUIDIZED BED COMBUSTORS; HEAT EXCHANGERS; HYDROCHLORIC ACID; MICROSTRUCTURE; OXIDATION; SILICA SAND; STEEL CORROSION; WEAR OF MATERIALS;

CARBON STEEL RODS; IN BED TUBES; MICROSTRUCTURAL ANALYSIS; PROFILOMETER;

TUBES (COMPONENTS);

CORROSION; EROSION; FLUIDIZED BED; HEAT EXCHANGER; WEAR;

EID: 17044446418     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(99)00247-1     Document Type: Conference Paper

References (26)

1. J. Stringer, Current information on metal wastage in fluidized bed combustors, in: J.P. Mustonen (Ed.), Proc. 9th Int. Conf. on Fluidized Bed Combustion, Boston, MA, May 1987, ASME, New York, NY, 1987, pp. 685-696.
2. J. Stringer, J.W. Stallings, J.M. Wheeldon, Wastage in bubbling fluidized-bed combustors: an update, in: A.M. Manaker (Ed.), Proc. 10th Int. Conf. on Fluidized Bed Combustion, San Francisco, CA, April 30-May 3, 1989, ASME, New York, NY, 1989, pp. 857-862.
3. L.J. Bragg, R.B. Finkelman, S.J. Tewalt, Distribution of chlorine in United States Coal, in: J. Stringer, D.D. Banerjee (Eds.), Chlorine in Coal, Elsevier, NY, 1991, pp. 3-10.
4. R.Q. Vincent, J.M. Poston, B.F. Smith, Erosion experience of the TVA 20 MW AFBC Voiler, in: J.P. Mustonen (Ed.), Proc. Int'l. Conf. on Fluidized Bed Combustion, ASME, 1987, pp. 672-684.
5. J.M. Stencel, R.E. Gonzalez, J.L. Schaefer, J.K. Neathery, J.M. Wheeldon, R.Q. Vincent, D.A. Canonico, Effect of chlorine on wastage of in-bed heat exchanger surfaces under FBC conditions, in: A.V. Levy (Ed.), Proc. Corrosion-Erosion-Wear of Materials at elevated temperatures, LBL, Berkeley, CA, Jan. 31-Feb. 2, 1990, pp. 32.1-32.11.
6. J.M. Wheeldon, An alternative conclusion to effect of chlorine on wastage of in-bed heat exchanger surfaces under FBC conditions by J.M. Stencel et al., in: A.V. Levy (Ed.), Proc. Corrosion-Erosion-Wear of Materials at Elevated Temperatures, LBL, Berkeley, CA, Jan. 31-Feb. 2, 1990, pp. 33.1-33.3.
7. V.K. Sethi, I.G. Wright, Evaporator tube wastage and chlorine, in: J. Stringer, D.D. Banerjee (Eds.), Chlorine in Coal, Elsevier, NY, 1991, pp. 417-423.
8. R.Q. Vincent, A.M. Manaker, Effect of chlorine content on materials exposed in coal fired fluidized beds, in: J. Stringer, D.D. Banerjee (Eds.), Chlorine in Coal, Elsevier, NY, 1991, pp. 389-409.
9. Olowson P.A., Almstedt A.E. Influence of pressure and fluidization velocity on the bubble behavior and gas flow distribution in a fluidized bed. Chem. Eng. Sci. 45:1990;1733-1741.
10. T.C. Kennedy, A Study of Forces on Immersed Tubes in Fluidized Bed, EPRI CS-1542, Project 718-2, Topical Report, 1980.
11. MacAdam S.S., Stringer J. Development of a unique laboratory scale fluidized bed wear testing unit. Wear. 135:1990;403-422.
12. MacAdam S.S., Stringer J. Temperature dependence of steel wastage in a bubbling fluidized bed simulator. Corrosion. 49:1993;156-169.
13. Hou P.Y., MacAdam S.S., Zhang H., Stringer J. Summary of results from the Berkeley in-bed tube erosion simulator. Mater. High Temp. 14:1997;325-335.
14. Zhang H., Hou P.Y., Stringer J. The effect of temperature gradient on steel tube wastage in a bubbling fluidized bed simulator. Wear. 197:1996;286-294.
15. S.S. MacAdam, Mechanisms of Oxidation/3-Body Abrasion in Steels, MS Thesis in Materials Science and Mineral Engineering, University of California at Berkeley, 1993.
16. MacAdam S.S., Stringer J. Particle impact and impact distribution within a fluidized bed combustor environment. Wear. 141:1991;373-394.
17. Oakey J.E., Minchener A.J., Stringer J. Ash deposition in atmospheric pressure fluidised bed combustion systems. J. Inst. Energy. 62:1989;208-219.
18. J.M. Wheeldon, J.W. Stallings, V.K. Sethi, I.G. Wright, Preliminary results from a programme to identify bed material properties which may have promoted metal loss from evaporator tubing in TVA's 20-MWe bubbling AFBC pilot plant, in: A.V. Levy (Ed.), Proc. of Conference on Erosion-Corrosion-Wear of Materials at Elevated Temperatures, Houston, TX, NACE, 1991, paper no. 22.
19. D.M. Rishel, F.S. Pettit, N. Birks, Some principal mechanisms in the simultaneous erosion and corrosion attack of metals at high temperature, in: A.V. Levy (Ed.), Proc. of Conference on Erosion-Corrosion-Wear of Materials at Elevated Temperatures, NACE, Houston, TX, 1991, paper no. 16.
20. Bruce D., Hancock P. Influence of mechanical properties of surface oxide films on oxidation mechanisms: Pt. 1. A vibrational technique to study the nature and growth of thermally formed oxide films on metals. J. Inst. Met. 97:1969;140-148.
21. Rhee M.H., McNallan M.J., Rothman M.F. Long term high temperature corrosion studies of high temperature alloys in chlorine contaminated environments. J. Mater. Energy Syst. 7:1986;294-301.
22. Reese E., Grabke H.J. Effects of chlorides on the oxidation of the 2.25 Cr-1 Mo steel. Werkst. Korros. 43:1992;547-557.
23. 2 coating on the oxidation behavior of alloys. J. Electrochem. Soc. 138:1990;327-328.
24. James P.J., Pinder L.W. Effect of coal chlorine on the fireside corrosion of boiler furnace wall and superheater/reheater tubing. Mater. High Temp. 14:1997;187-196.
25. Grabke H.J., Reese E., Spiegel M. The effects of chlorides, hydrogen chloride, and sulfur dioxide in the oxidation of steels below deposits. Corros. Sci. 37:1995;1023-1043.
26. Schutze M. Plasticity of protective oxide scales. Mater. Sci. Technol. 6:1990;32-38.