Surface characterisation of single fibres from mechanical pulps by contact angle measurements

Nordic Pulp and Paper Research Journal

Volumn 20, Issue 1, 2005, Pages 107-113

  Koljonen, Krista ^a   Stenius, Per ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Chemithermomechanical pulp (CTMP); Contact angle; Pressure groundwood (PGW); Surface extractives; Surface lignin; Thermomechanical pulp (TMP); Wetting; Wilhelmy balance

Indexed keywords

CONTACT ANGLE; LIGNIN; SURFACE PROPERTIES; WETTING;

SURFACE EXTRACTIVES; SURFACE LIGNIN; WILHELMY BALANCE;

THERMOMECHANICAL PULP;

ACID GROUPS; CONTACT ANGLE; ETHYLENE GLYCOL; PEROXIDE BLEACHING; SURFACE PROPERTIES; WATER; WETTING;

EID: 17044426755     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2005-20-01-p107-114     Document Type: Article

References (51)

1. Belgacem, M.N. (2000): Characterisation of polysaccharides, lignin and other woody components by inverse gas chromatography, Cellul. Chem. Technol. 34(3-4), 357.
2. Berg, J.C. (1986): In "Composite Systems from Natural and Synthetic polymers". Edited L. Salmén, A. de Ruvo, J.C. Seferls and E.B, Stark, Elsevler Science Publishers B.V., Amsterdam, pp. 23-46.
3. Berg, J.C. (1993): The importance of acid-base interactions in wetting, coating, adhesion and related phenomena, Nordic Pulp Pap. Res. J. 8(1), 75.
4. Börås, L. and Gatenholm, P. (1999a): Surface composition and morphology of CTMP fibres, Holzforschung 53(2), 188.
5. Börås, L. and Gatenholm, P. (1999b): Surface properties of mechanical pulps prepared under various sulphonation conditions and preheating time, Holzforschung 53(4), 429.
6. Carlsson, C.M., Ström, G., Erlksson, I. and Lindström, E. (1994): Improved wettability of chemlthermomechanical pulp by oxygen plasma treatment, Nordic Pulp Pap. Res. J. 9(2), 72.
7. Della Volpe, C. and Siboni, S. (2000): Acid-base surface free energies of solids and the definition of scales in the Good-van Oss-Chaundry theory, J. Adhesion Sol. Teohnol, 14(2), 235.
8. Della Volpe, C. and Siboni, S. (2001): In "Water in Biomaterials Surface Science". Edited M. Morra. John Wiley & Sons, Ltd., England, pp. 183-214.
9. Deng, Y. and Abazeri, M. (1998): Contact angle measurement of wood fibres in surfactant and polymer solutions, Wood Fiber Sol. 30(2), 155.
10. Felix, J.M. and Gatenholm, P. (1993): Characterization of cellulose fibers using inverse gas chromatography, Nordic Pulp Pap. Res. J. 8(1), 200.
11. Fowkes, F.M. and Mustafa, M.A. (1978): Acid-base interactions in polymer adsorption, Ind. Eng. Chem. Prod. Res. Dev. 17(1), 3.
12. Fowkes, F.M. (1991): In "Acid-base Interactions: Relevance to Adhesion Science and Technology", Edited K.L. Mittel and H.R. Jr. Anderson. VSP BV Utrecht, The Netherlands, pp. 93-115.
13. Gellerstedt, F. and Gatenholm, P. (1999): Surface properties of lignocellulosic fibers bearing carboxyllc groups, Cellulose 6(2), 103.
14. Gellerstedt, F., Wågberg, L. and Gatenholm, P. (2000): Swelling behaviour of succinylated fibers, Cellulose 7(1), 67.
15. Good, R.J., Srivatsa, N.R., Islam, M., Huang, H.T.L and van Oss, C.J. (1991): In "Acid-base Interactions: Relevance to Adhesion Science and Technology". Edited K.L. Mittal and H.R. Jr, Anderson, VSP, Utrecht, pp, 79-89.
16. Henriksson, A. and Gatenholm, P. (2002): Surface properties of CTMP fibers modified with xylans, Cellulose 9(1), 55.
17. Hodgson, K.T. and Berg, J.C. (1988a); Dynamic wettabllity properties of single wood pulp fibers and their relationship to adsorbency. Wood Fiber Sci. 20(1), 3
18. Hodgson, K.T. and Berg, J.C. (1988b): The effect of surfactants on wicking flow in fiber network, J. Colloid Interf, Sci. 121(1), 22.
19. Jacob, P. and Berg, J.C. (1993); Zlsman analysis of three pulp fiber furnishes, Tappl J. 76(2), 105.
20. Jacob, P. and Berg, J.C. (1994): Acid-base surface energy characterization of microcrystalline cellulose and two wood pulp fiber types using Inverse gas chromatography, Langmuir 10(9), 3086.
21. Johansson, L.-S., Campbell, J.M., Koljonen, K. and Stenius, P. (1999): Evaluation of surface lignin on cellulose fibers with XPS, Appl. Surf. Sci. 144-145, 92.
22. Klungness, J.H. (1981): Measuring the wetting angle and perimeter of single wood pulp fibers: A modified method. Tappl 64(12), 65.
23. Koljonen, K., Österberg, M., Johansson, L.-S. and Stenius, P. (2003): Surface chemistry and morphology of different mechanical pulps determined by ESCA and AFM, Colloids Surf. A 228(1-3), 143.
24. Koljonen, K., Mustranta, A. and Stenius, P. (2004): Surface characterisation of mechanical pulps by polyelectrolyte adsorption, Nordic Pulp Pap. Res. J. 19(4), 495.
25. Krueger, J. and Hodgson, K. (1994): Single fibre wettabillty of high sized pulp fibres, Tappl 77(7), 83.
26. Krueger, J. and Hodgson, K. (1995): The relationship between single fiber contact angle and sizing performance, Tappi J. 78(2), 154.
27. Laine, J., Hynynen, R. and Stenius, P. (1997); In "The Fundamentals of Papermaking Materials, Transactions of the 11th Fundamental Research Symposium in held at Cambridge". Edited C.F. Baker, Plra International, UK, pp. 859-892.
28. Lam, C.C.N., Lu, J.J. and Neumann, A.W. (2001): In "Handbook of applied surface and colloid chemistry". Edited K. Holmberg, D.O, Shah and M.J., Schwuger. John Wiley & Sons, Ltd, Vol. 2., Chichester, pp. 251-280.
29. Lee, L.-H. (1996): Correlation between Lewls-acid-base surface interaction components and linear salvation energy relationship solvatochromlc a and b parameters, Langmuir 12(6), 1681.
30. Lee, S.B. and Luner, P. (1972): The wetting properties of lignin, Tappl 55(1), 116.
31. Lindholm, C.-A. (1999): In " Mechanical Pulping, Papermaking Science and Technology Book 5", Edited J. Sundholm. Fapet Oy, Jyväskylä, Finland, pp, 313-343.
32. Matuna, L.M., Balatinecz, J.J., Park, C.B. and Woodhams, R.T. (1999): Surface characteristics of chemically modified newsprint fibers determined by inverse gas chromatography, Wood Fiber Sci. 31 (2), 116.
33. Maximova, N., Österberg, M., Laine, J. and Stenius, P. (2004): The wetting properties and morphology of lignin adsorbed on cellulose fibres and mica, Colloids Surf. A 239(1-3), 65.
34. Ness, J. and Hodgson, K.T. (1999): The effects of peroxide bleaching on thermo-mechanical pulp self sizing, Nordic Pulp Pap. Res. J. 14(2), 111.
35. Nylund, J., Sundberg, K., Shen, Q. and Rosenholm, J.B. (1998): Determination of surface energy and wettability of wood resins, Colloids Surf. A 133(3), 261.
36. van Oss, C.J. (1994); "Interfacial Forces in Aqueous Media". Marcel Dekker, Inc., New York.
37. Qin, M., Hannuksela, T. and Holmbom, B. (2003): Physico-chemical characterization of TMP resin and related model mixtures, Colloids, Surf. A 221 (1-3), 243.
38. Shen, W., Parker, I.H. and Sheng, Y.J. (1998): The effects of surface extractives and lignin on the surface energy of eucalypt kraft pulp fibres, J. Adhesion Sci. Technol. 12(2), 161.
39. Shen, W. and Parker, I.H. (1999): Surface composition and surface energetics of various eucalypt pulps, Cellulose 6(1), 41.
40. Shen, W., Sheng, Y.J. and Parker, I.H. (2000): In "Cellulosic pulps, fibres and materials", Edited J.F. Kennedy, G.O. Phillips and P.A. Williams, Woodhead Publishing Ltd., Cambridge, pp. 181-196.
41. Sjöström, E. (1993): "Wood Chemistry, Fundamentals and Applications", Academic Press, Inc., California, USA.
42. Sundholm, J. (1999); In "Mechanical Pulping, Papermaking Science and Technology Book 5". Edited J. Sundholm, Fapet Oy, Jyväskylä, Finland, pp, 17-21.
43. Tiberg, F., Daicic, J. and Fröberg, J. (2001): In "Handbook of applied surface and colloid chemistry". Edited K. Holmberg, D.O, Shah and M.J. Schwuger, John Wiley & Sons, Ltd, Vol. 1, Chichester, pp, 123-173.
44. Tze, W.T. and Gardner, D.J. (2001): Swelling of recycled wood pulp fibres: Effect on hydroxyl availability and surface chemistry, Wood Fiber Sei, 33(3), 364.
45. Wistara, N., Zhang, X. and Young, R.A. (1999): Properties and treatments of pulps from recycled paper, Part II, Surface properties and crystallinlty of fibres and fines. Cellulose 6(4), 325.
46. Wålinder, M.E.P. and Gardner, D.J. (2000): Surface energy of extracted and non-extracted Norway spruce wood particles studied by inverse gas chromatography, Wood Fiber Sci. 32(4), 478.
47. Wålinder, M.E.P. and Johansson, I. (2001 a): Measurement of wood wettability by Wilhelmy method. Part 1, Contamination of probe liquids by extractives, Holzforschung 55(1), 21.
48. Wålinder, M.E.P. and Ström, G. (2001 b): Measurement of wood wettability by Wilhelmy method, Part 2. Determination of apparent contact angles, Holzforschung 55(1), 33.
49. Wålinder, M.E.P. (2002): Study of Lewis acid-base properties of wood by contact angle analysis, Holzforschung 56(4), 363.
50. Young, R.A. (1976): Wettability of wood pulp fibres- Applicability of methodology, Wood and fiber 8(2), 120.
51. Young, R.A. (1992): In "Emerging technologies for materials and chemicals from biomass", Edited Table 1. Notation and treatments of pulps. All pulps were prepared from Norwegian spruce