The role of modeling in the development of advanced processes for metallic aerospace alloys

Metals and Materials International

Volumn 10, Issue 6, 2004, Pages 589-603

  Semiatin, S L ^a   Kobryn, P A ^a   Ivasishin, O M ^b   Zhuk, H ^c   Wu, W T ^d   Lee, C S ^e  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b INSTITUTE OF METAL PHYSICS   (Ukraine)

^c E O PATON ELECTRIC WELDING INSTITUTE   (Ukraine)

^d Sci Forming Technol Corporation   (United States)

^e Pohang University of Science and Technology (POSTECH)   (South Korea)

Author keywords

Advanced processes; Aerospace alloys; Heat treatment; Machining; Melting; Models

Indexed keywords

HEAT TREATMENT; MACHINING; MANUFACTURE; MELTING; MODELS;

ADVANCED PROCESS; AEROSPACE ALLOYS; DEVELOPMENT AND APPLICATIONS; MANUFACTURING ENVIRONMENTS; MELTING AND SOLIDIFICATION; MICROSTRUCTURE PROCESSING; RAPID HEAT TREATMENT; SEVERE PLASTIC DEFORMATIONS;

LASER BEAM MACHINING;

EID: 17044420367     PISSN: 15989623     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF03027423     Document Type: Article

References (73)

1. A. Mitchell, Iron Steel Inst. Jpn. Inter. 32, 557 (1992).
2. J. T. Schriempf, E. J. Whitney, P. A. Blomquist, and F. G. Arcella, Advances in Powder Metallurgy and Paniculate Materials 3, 21 (1997).
3. Y. T. Zhu, T. G. Langdon, R. Z. Valiev, S. L. Semiatin, D. H. Shin, and T.C. Lowe, Ultrafine Grained Materials III, IMS, Warrendale, PA (2004).
4. S. L. Semiatin and I. M. Sukonnik, Physical Simulation of Casting, Hot Rolling, and Welding (eds., H. G. Suzuki, T. Sakai, and F. Matsuda), p. 395, Dynamic Systems Inc., Poestenkill, NY (1997).
5. O. M. Ivasishin, P. E. Markovsky, Yu. V. Matviychuk, and S. L. Semiatin, Metall. Mater. Trans. A 34, 147 (2003).
6. Y. Yin, W. T. Wu, S. Srivatsa, S. L. Semiatin, and J. Gayda, NUMIFORM 2004 (eds., S. Ghosh, J. M. Castro, and J. K. Lee), p. 400, Columbus, Ohio (2004).
7. R. Komanduri, D. G. Flom, and M. Lee, J. Eng. for Industry, Trans. ASME 107, 325 (1985).
8. A. Mitchell, Mater. Sci. Eng. A 243, 257 (1998).
9. J. R. Wood, JOM 54, 56 (2002).
10. J. P. Bellott, B. Foster, S. Hans, E. Hess, D. Ablitzer, and A. Mitchell, Metall. Mater. Trans. B 28, 1001 (1997).
11. X. Huang, J. S. Chou, K. O. Yu, D. J. Tilly, and V. Suri, Physical Simulation of Casting, Hot Rolling, and Welding (eds., H. G. Suzuki, T. Sakai, and F. Matsuda), p. 489, Dynamic Systems Inc., Poestenkill, NY (1997).
12. A. Powell, J. Van den Avyle, B. Damkroger, J. Szekely, and U. Pal, Metall. Mater. Trans. B 28, 1227 (1997).
13. Langmuir, Phys. Rev. 5, 329 (1913).
14. V. G. Ivanchenko, O. M. Ivasishin, and S. L. Semiatin, Metall Mater. Trans. B 34, 911 (2003).
15. S. V. Akhonin, N. P. Trigub, V. N. Zamkov, and S. L. Semiatin, Metall. Mater. Trans. B 34, 447 (2003).
16. T. Isawa, H. Nakamura, and K. Murakami, ISIJ Int. 32, 607 (1992).
17. S. L. Semiatin, V. G. Ivanchenko, S. V. Akhonin, and O. M. Ivasishin, Metall. Mater. Trans. B 35, 235 (2004).
18. H. S. Carslaw and J. C. Jaeger, Conduction of Heat in Solids, Oxford University Press, London (1959).
19. H. Zhuk, P. A. Kobryn, and S. L. Semiatin, Paper submitted to Scripta mater. (2004).
20. P. A. Kobryn and S. L. Semiatin, J. Mater. Proc. Tech. 135, 330 (2003).
21. D. M. Keicher, W. D. Miller, J. E. Smugeresky, and J. A. Romero, Hard Coatings Based on Borides, Carbides & Nitrides: Synthesis, Characterization & Applications (eds., Y-W. Chung, R.W.J. Chia, and A. Kumar), p. 369, IMS, Warrendale, PA (1998).
22. V. Semak, Unpublished research, Pennsylvania State University, State College, PA (1996).
23. J. L. Beuth and N. W. Klingbeil, JOM 53, 36 (2001).
24. A. Vasinonta, J. L. Beuth, and M. L. Griffith, Solid Free-form Fabrication Proceedings (eds., D. L. Bourell, J. J. Beaman, R. H. Crawford, H. L. Marcus, and J. W. Barlow), p. 200, University of Texas, Austin, Texas (2000).
25. N. W. Klingbeil, C. J. Brown, S. Bontha, P. A. Kobryn, and H. L. Fraser, Solid Freeform Fabrication Proceedings (eds., D. L. Bourell, R. H. Crawford, J. J. Beaman, K. L. Wood, and H. L. Marcus) p. 142, University of Texas, Austin, Texas (2002).
26. ProCAST™ Users Manual & Technical Reference, Version 3.1.0, UES Software Inc., Dayton, OH (1998).
27. J. D. Hunt, Mater. Sci. Eng. A 65, 73 (1984).
28. P. A. Kobryn, N. W. Klingbeil, and C. J. Brown, Unpublished research, Air Force Research Laboratory, Wright-Patterson Air Force Base, OH (2003).
29. V.M. Segal, Mater. Sci. Eng. A 197, 157 (1995).
30. Y. Beygelzimer, D. Orlov, and V. Varyukhin, Ultrafine Grained Materials II (eds., Y. T. Zhu, T. G. Langdon, R. S. Mishra, S. L. Semiatin, M. J. Saran, and T. C. Lowe), p. 297, TMS, Warrendale, PA (2002).
31. V. M. Segal, V. I. Reznikov, A. E. Drobyshevskiy, and V. I. Kopylov, Russ. Metall, 1, 99 (1981).
32. V.M. Segal, Mater. Sci. Eng. A 271, 322 (1999).
33. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T. G. Langdon, Scripta mater. 35, 143 (1996).
34. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T. G. Langdon, Mater. Sci. Eng. A 257, 328 (1998).
35. A. Gholinia, P. Bate, and P. B. Prangnell, Acta mater. 50, 2121 (2002).
36. I. J. Beyerlein, S. Li, D. J. Alexander, C. T. Necker, C. N. Tome, and M. A. Bourke, Ultrafine Grained Materials III (eds., Y. T. Zhu, T. G. Langdon, R. Z. Valiev, S. L. Semiatin, D. H. Shin, and T. C. Lowe), p. 185, TMS, Warrendale, PA (2004).
37. L. S. Toth, Advanced Engineering Materials 5, 308 (2003).
38. L. S. Toth, R. A. Massion, L. Germain, S. C. Baik, and S. Suwas, Acta mater. 52, 1885 (2004).
39. J-Y. Suh, H-S. Kim, J-W. Park, and J-Y. Chang, Scripta mater. 44, 677 (2001).
40. R. Srinivasan, Scripta mater. 44, 91 (2001).
41. Y-L. Yang and S. Lee, J. Mater. Proc. Tech. 140, 583 (2003).
42. S. J. Oh and S. B. Kang, Mater. Sci. Eng. A 343, 107 (2003).
43. X. Kaculi, Proc. 2003 ASME Inter. Mech. Eng. Congress, p. 1, ASME, New York (2003).
44. S. C. Baik, Y Estrin, H. S. Kim, and R. J. Hellmig, Mater. Sci. Eng. A 351, 86 (2003).
45. S. Ferrasse, V. M. Segal, S. R. Kalidindi, and F. Alford, Mat. Sci. Eng. A 368, 28 (2004).
46. S. R. Agnew, PhD Thesis, Northwestern University (1998).
47. S. L. Semiatin, V. M. Segal, R. E. Goforth, N. Frey, and D. P. DeLo, Metall. Mater. Trans. A 30, 1425 (1999).
48. S. L. Semiatin and J. J. Jonas, Formability and Workability of Metals, ASM, Materials Park, OH (1984).
49. D. P. DeLo and S. L. Semiatin, Metall. Mater. Trans. A 30, 1391 (1999).
50. S. L. Semiatin, D. P. DeLo, and E. B. Shell, Acta mater. 48, 1841 (2000).
51. P. N. Fagin, J. O. Brown, T. M. Brown, K. V. Jata, and S. L. Semiatin, Metall. Mater. Trans. A 32, 1869 (2001).
52. M. G. Cockcroft and D. J. Latham, J. Inst. Metals 96, 33 (1968).
53. R. Lapovok, Inter. J. Fracture 115, 159 (2002).
54. R. Ye. Lapovok and R. E. Cottam, Ultrafine Grained Materials II (eds., Y. T. Zhu, T. G. Langdon, R. S. Mishra, S. L. Semiatin, M. J. Saran, T. C. Lowe), p. 547, TMS, Warrendale, PA, (2002).
55. D. Furrer and J. Gayda, Advanced Materials and Processes 161, 36 (2003).
56. J. M. Hyzak, C. A. MacIntyre, and D. V. Sundberg, Superalloys 1988 (eds., S. Reichmann et al.), p. 121, TMS (1988).
57. O. M. Ivasishin and S. L. Semiatin, Proc. THERMEC 2000 (eds., T. Chandra et al.), Elsevier Science Ltd., Amsterdam, The Netherlands (2001) (pdf only).
58. O.M. Ivasishin, Sixth World Conference on Titanium (eds., P. Lacombe, R. Tricot, G. Beranger), p. 1535, Societé Francaise de Metallurgie, Les Ulis Cedex, France (1998).
59. O. M. Ivasishin and H. M. Flower, J. Mater. Sci. 21, 2519 (1986).
60. S. L. Semiatin, J. C. Soper, and I. M. Sukonnik, Acta mater. 44, 1979 (1996).
61. S. L. Semiatin, P. N. Fagin, M. G. Glavicic, I. M. Sukonnik, and O. M. Ivasishin, Mater. Sci. Eng. A 299, 225 (2001).
62. O. M. Ivasishin, S. V. Shevchenko, and S. L. Semiatin, Mater. Sci. Eng. A 332, 343 (2002).
63. O. M. Ivasishin, S. L. Semiatin, P. E. Markovsky, S. V. Shevchenko, and S. V. Ulshin, Mater. Sci. Eng. A 337, 88 (2002).
64. O. M. Ivasishin, S. V. Shevchenko, P. E. Markovsky, and S. L. Semiatin, Ti-2003: Science Technology (eds., G. Luetjering and J. Albrecht), p. 1307, Wiley-VCH Verlag GmbH (2004).
65. O. M. Ivasishin, S. V. Shevchenko, N. L. Vasiliev, and S. L. Semiatin, Acta mater. 51, 1019 (2003).
66. K. Iwata, K. Osakada, and Y. Terasaka, J. Eng. Mat. Tech., Trans. ASME 106, 132 (1984).
67. Z. C. Lin and S. Y. Lin, J. Eng. Mat. Tech., Trans. ASME 114, 218 (1992).
68. J. Hashemi, A. A. Tseng, and P. C. Chou, J. Mater. Eng. Perf. 3, 712 (l994).
69. T. Obikawa and E. Usui, J. Mfg. Sci. Eng., Trans ASME 118, 208 (1996).
70. E. Ceretti, P. Fallböhmer, W. T. Wu, and T. Altan, J. Mater. Proc. Tech. 59, 169 (1996).
71. P. Chigurupati, J-T. Jinn, J. Y. Oh, Y. Yin, H. Zhang, and W. T. Wu, NUMIFORM 2004 (eds., S. Ghosh, J. M. Castro, and J. K. Lee), p. 1359, Columbus, Ohio (2004).
72. S. H. Rhim and S. I. Oh, NUMIFORM 2004 (eds., S. Ghosh, J. M. Castro, and J. K. Lee), p. 143, Columbus, Ohio (2004).
73. J. Hua, PhD Thesis, Ohio State University, Columbus, Ohio (2002).