Residual stress state and hardness depth in electric discharge machining: De-ionized water as dielectric liquid

Machining Science and Technology

Volumn 9, Issue 1, 2005, Pages 39-61

  Ekmekci, Bülent ^a,d   Elkoca, Oktay ^b   Tekkaya, A Erman ^c   Erden, Abdulkadir ^c  

^a Faculty of Arts and Sciences   (Turkey)

^b Eregli Iron and Steel Works Co   (Turkey)

^c ATILIM UNIVERSITY   (Turkey)

^d ZONGULDAK KARAELMAS UNIVERSITY   (Turkey)

Author keywords

EDM; Electric Discharge Machining; Residual Stresses

Indexed keywords

DIELECTRIC LIQUIDS; ELECTRIC FIELDS; HEAT AFFECTED ZONE; MATHEMATICAL MODELS; MICROSTRUCTURE; PLASMAS; PLASTIC DEFORMATION; RESIDUAL STRESSES; TENSILE STRESS; WATER;

DE-IONIZED WATER; EDM; HARDNESS DEPTH; PLASMA CHANNELS;

ELECTRIC DISCHARGE MACHINING;

EID: 17044407598     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1081/MST-200051244     Document Type: Article

References (36)

1. Barash, M. and Sri-Ram, M.G. (1963) Some Properties of Spark Machined Heat Treated Steel, Proceeding of the 3rd International Machine Tool Design and Research Conference, Birmingham, 85-91.
2. Heuvelman, C.J. (1969) Some Aspects of the Research on Electro-Erosion Machining, Ann. CIRP, 17(1): 195-199.
3. Dijck, F.V. and Snoeys, R. (1974) Metal Removal and Surface Layer in Electro-Discharge Machining. International Conference on Production Engineering, Tokyo, 46-50.
4. Greene, J.E. and Guerrero-Alvarez, J.L. (1974) Electro Erosion of Metal Surfaces, Metall. Trans., 5A(3): 695-706.
5. Toren, M, Zvirin, Y., and Winograd, Y. (1975) Melting and Evaporation Phenomena During Electrical Erosion, Transactions of the ASME, Journal of Heat Transfer, 97(1): 576-581.
6. Koning, W., Zvirin, Y., and Toren, M. (1975) Material Removal and Energy Distribution in Electrical Discharge Machining, Ann. CIRP, 24(1): 95-100.
7. Marry, C.C. (1977) Investigation of Surface Temperature in Electro-Discharge Machining, Transactions of the ASME, Journal of Engineering for Industry, 99B: 682-684.
8. Erden, A. and Kaftanoglu, B. (1980) Heat Transfer Modeling of Electric Discharge Machining. Twenty-First Int. M.T.D.R. Conf., Swansea, 351-358.
9. Erden, A. and Kaftanoglu, B. (1981) Thermo-Mathematical Modeling and Optimization of Energy Pulse Forms in Electric Discharge Machining (EDM), Int. J. Mach. Tool Des. Res., 21(1): 11-22.
10. Pandey, P.C. and Jilani, S.T. (1986) Plasma Channel Growth and the Re-solidified Layer in EDM, Precision Eng, 8(2): 104-110.
11. DiBitonto, D.D., Eubank, P.T., Patel, M.R., and Barrufet, M.A. (1989) Theoretical Models of the Electrical Discharge Machining Process. I. A Simple Cothode Errosion Model, Journal of Applied Physics, 66(9): 4095-4103.
12. Patel, M.R., Barrufet, M.A., Eubank, P.T., and DiBitonto, D.D. (1989) Theoretical Models of the Electrical Discharge Machining Process. II. The Anode Erosion Model, Journal of Applied Physics, 66(9): 4104-4111.
13. Eubank, P.T., Patel, M.R., Barrufel, M.A., and Bozkurt, B. (1993) Theoretical Models of the Electrical Discharge Machining Process. III. The Variable Mass, Cylindrical Plasma Model, Journal of Applied Physics, 73(11): 7900-7909.
14. McGeough, J.A. and Rasmussen, H. (1982) A Macroscopic Model of Electro-Discharge Machining, Int. J. Mach. Tool Des. Res., 22(4): 333-339.
15. Opitz, H. (1960) Metallurgical Aspects and Surface Characteristics. Spark Machining Symposium, Metal Treatment and Drop Forging, Birmingham, 237-250.
16. Lloyd, H.K. and Warren, R.H. (1965) Metallurgy of Spark-Machined Surfaces, J. Iron Steel Inst., 203(3): 238-247.
17. Wallbank, J. (1980) Effect of EDM on Material Properties of Die Steels, Metallurgia, 47(1): 356-362.
18. Ghabrial, S.R. (1972) The Significance of the Hardness Depth and the Effect of Notches on the Fatigue Strength of Tool Steel for Various Rates of Spark Erosion, Int. J. Mach. Tool Des. Res., 12(1): 297-309.
19. Rebelo, J.C., Dias, A.M., Kremer, D., and Lebrun, J.L. (1998) Influence of Pulse Energy on the Surface Integrity of Martensitic Steels, J. Mater. Process. Tech., 84: 90-96.
20. Mamalis, A.G., Vosniakos, G.C., and Vacevanidis, N.M. (1988) Residual Stress Distribution and Structural Phenomena of High-Strength Steel Surfaces Due to EDM and Ball-Drop Forming, Ann. of CIRP, 37(1): 531-535.
21. Lim, L.C., Lee, L.C., Wong, Y.S., and Lu, H.H. (1991) Solidification Microstructure of Electro-discharge Machined Surfaces of Tool Steels, Mater. Sci. Tech., 7: 239-248.
22. Cabanillas, E.D., Desimoni, J., Punte, G., and Mercader, R.C. (2000). Formation of Carbides by Electro-Discharge Machining and Alpha Iron, Mater. Sci. Eng., A276: 133-140.
23. Thomson, P.F. (1989) Surface Damage in Electrodischarge Machining, Mater. Sci. Tech., 5: 1153-1157.
24. Lee, L.C., Lim, L.C., Narayanan, V., and Venkatesh, V.C. (1988) Qualification of Surface Damage of Tool Steel After EDM, Int. J. Mach. Tools Manufact., 28(4): 359-372.
25. Kruth, J.P., Lauwers, B., Schacht, B., Bleys, P., and Stucki, M. (2001) Comparison Between Oil and Water Dielectric in Wire EDM of Tool Steel. In Proc. of 13th Int. Symposium for Electro-Machining, Bilbao, 463-472.
26. Brinksmeier, E., Konig, W., Leskovar, P., Peters, J., and Tonshoff, H.K. (1982) Residual Stress Measurement and Causes in Machining Process, Ann. of CIRP, 31(2): 491-510.
27. Crookall, J.R. and Khor, B.C. (1972) Residual Stresses and Surface Effects in Electro Discharge Machining, Proceedings 13th MTDR Conf., Birmingham, September, 331-338.
28. Kruth, J.P. and Bleys, P. (2000) Measuring Residual Stress Caused by Wire EDM of Tool Steel, Int. J. Electrical Mach., 5: 23-28.
29. ASM Handbook Committee (1973) Metals Handbook, 8th Edition, Metallography, Structures and Phase Diagram, Vol. 8, Metals Park, Ohio 44079, USA, pp. 30-31.
30. Yadav, V., Jain, V.K., and Dixit, P.M. (2002) Thermal Stresses Due to Electrical Discharge Machining, Int. J. Mach. Tool. Manuf., 42: 877-888.
31. Shankar, P., Jain, V.K., and Sundararajan, T. (1997) Analysis of Profiles During EDM Process, Mach. Sci. Technol., 1(2): 195-217.
32. Bhattacharya, R., Jain, V.K., and Ghoshdastidar, P.S. (1996) Numerical Simulations of Thermal Erosion in EDM Process, IE(1) Journal PR, 77: 13-19.
33. Madhu, P., Jain, V.K., Sundararajan, T., and Rajurkar, K.P. (1991) Finite Element Analysis of EDM Process, Processing of Advanced Materials, 1: 161- 173.
34. Stablein, F. (1931) Spannungsmessungen in eiseiting abgeloschten Knüppeln. Kruppsche Monatshefte, 12 Jahrgang, Mai 1931, 93-99.
35. Rajurkar, K.P. and Pandit, S.M. (1984) Quantitative Expressions for Some Aspects of Surface Integrity of Electro Discharge Machined Components, Transactions of the ASME, Journal of Engineering for Industry, 106: 171-177.
36. Guu, Y.H., Hocheng, H., Chou, C.Y., and Deng, C.S. (2003) Effect of Electrical Discharge Machining on Surface Characteristics and Machining Damage of AISI D2 Tool Steel, Mater. Sci. Eng., A358: 37-43.