On the nature of internal interfaces in tempered martensite ferritic steels

Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques

Volumn 94, Issue 5, 2003, Pages 511-520

  Dronhofer, A ^a   Pesicka J ^b   Dlouhy A ^c   Eggeler, G ^a  

^a RUHR UNIVERSITY BOCHUM   (Germany)

^b CHARLES UNIVERSITY   (Czech Republic)

^c INSTITUTE OF PHYSICS OF MATERIALS   (Czech Republic)

Author keywords

Grain boundaries; Internal interfaces; Martensite variants; Orientation imaging; Subgrain boundaries; Tempered martensite ferritic steels

Indexed keywords

CARBIDES; CREEP; FERRITE; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; HEAT TREATMENT; INTERFACES (MATERIALS); MARTENSITE; MICROSTRUCTURE; OPTICAL MICROSCOPY; PRECIPITATION (CHEMICAL); SCANNING ELECTRON MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY;

INTERNAL INTERFACES; MARTENSITE VARIANTS; ORIENTATION IMAGING; SUBGRAIN BOUNDARIES; TEMPERED MARTENSITE FERRITIC STEELS;

STEEL;

EID: 16544366480     PISSN: 00443093     EISSN: None     Source Type: Journal    
DOI: 10.3139/146.030511     Document Type: Article

References (65)

1. E. Houdremont: Handbuch der Sonderstahlkunde, Springer-Verlag, Berlin (1956).
2. K.J. Irvine, D.J. Crowe, F.B. Pickering: J. Iron Steel Inst. 196 (1960) 386.
3. J.Z. Briggs, T.D. Parker: The Super 12% Cr Steels, Climax Molybdenum Company, New York (1965).
4. J. Jesper, H.R. Kautz, in: Werkstoffe und Schweißtechnik im Kraftwerk, VGB-Tagungsband, Essen (1985) 275.
5. T. Fujita: Adv. Mater. Proc. 4 (1992) 42.
6. M. Staubli, K.-H. Mayer, T.U. Kern, R.W. Vanstone, R. Hanus, J. Stief, K.-H. Schönfeld, in: R. Viswanathan, W.T. Bakker, J.D. Parker (Eds.), Advances in Material Technology for Fossil Power Plants, The Institute of Materials, London (2001) 15.
7. C.M. Wayman: Introduction to the Crystallography of Martensitic Transformations, Macmillan Series in Materials Science, The MacMillan Company, New York (1964).
8. E.R. Petty: Martensite, Longman, London (1970).
9. L. Delay, in: P. Haasen (Ed.), Materials Science and Technology, Vol. 5: Phase Transformations in Materials, VCH, Weinheim (1991) 339.
10. H.K.D.H. Bhadeshia: Bainite in Steels, Cambridge University Press, London (1992).
11. G. Eggeler, B. Ilschner, N. Nilsvang, in: D.G. Brandon, R. Chaim, A. Rosen (Eds.), Strength of Metals and Alloys - ICSMA 9, Vol. I, Freund Publishing House Ltd., London (1991) 351.
12. A. Dronhofer: Dr.-Ing. Thesis, Ruhr-Universität Bochum, Bochum (2002).
13. W.C. Leslie, E. Hornbogen, in: R.W. Cahn, P. Haasen, (Eds.), Physical Metallurgy, 4th Edition, Elsevier Science, Amsterdam (1996) 1555.
14. P. Haasen: Physical Metallurgy, Cambridge University Press, Cambridge (1986).
15. S. Straub, W. Blum, D. Rottger, P. Polcik, D. Eifler, A. Borbely, T. Ungar: Steel Res. 68 (1997) 368.
16. F. Garofalo: Fundamentals of Creep and Creep Rupture in Metals, MacMillan, New York (1965).
17. B. Ilschner: Hochtemperaturplastizität, Springer-Verlag, Berlin (1973).
18. J. Cadek: Creep in Metallic Materials, Elsevier, Amsterdam (1988).
19. W. Blum, in: H. Mughrabi (Ed.), Materials Science and Technology, Vol. 6, Plastic Deformation and Fracture of Materials, VCH, Weinheim (1993) 359.
20. F.R.N. Nabarro, H.L. de Villiers: The Physics of Creep, Taylor and Francis, London (1995).
21. J.W. Martin, R.D. Doherty, B. Cantor: Stability of Microstructure in Metallic Systems, 2nd Edition, Cambridge University Press, Cambridge (1997).
22. W.B. Jones, in: A.K. Khare (Ed.), Ferritic Steels for High Temperature Applications, ASM, Metals Park, Ohio (1983) 221.
23. K. Sawada, M. Takeda, K. Maruyama, R. Ishii, M. Yamada, in: J. Lecomte-Beckers et al. (Eds.), Materials for Advanced Power Engineeing, Part I, Schriften des Forschungszentrums, Jülich (1998) 575.
24. G. Eggeler, N. Nilsvang, B. Ilschner: Steel Res. 58 (1987) 97.
25. G. Eggeler: Acta metall. 37 (1989) 3225.
26. G. Eggeler, J.C. Earthman, N. Nilsvang, B. Ilschner: Acta metall. 37 (1989) 49.
27. H.K.D.H. Bhadeshia, A. Strang, D.J. Gooch: Int. Mater. Rev. 43 (1998) 45.
28. H.K.D.H. Bhadeshia: Mater. Sci. Tech. Ser. 15 (1999) 22.
29. G. Inden, P. Neumann: Steel Res. 67 (1996) 401.
30. D.V. Shtansky, G. Inden: Acta mater. 45 (1997) 2861.
31. D.V. Shtansky, G. Inden: Acta mater. 45 (1997) 2879.
32. P. Franke, G. Inden: Z. Metallkd. 88 (1997) 917.
33. J. Ågren, M.T. Clavaguera-Mora, G. Inden, H. Kumar, C. Sigli: Calphad-computer coupling of phase diagrams and thermochemistry 24 (2000) 41.
34. G.B. Olson: Mater. Sci. Eng. A 273-275 (1999) 11.
35. K. Otsuka, C.M. Wayman: Shape Memory Materials, Cambridge Unversity Press, Cambridge (1998).
36. J. Pešička, A. Dronhofer, R. Kužel, G. Eggeler: submitted for publication in Acta mater.
37. H. Brauer: Diplomarbeit, Ruhr-Universität Bochum, Bochum (1997).
38. J. Duyster: Image analysis software DIAna, Ruhr Universität Bochum, Bochum (1997).
39. M. H. Loretto: Electron Beam Analysis of Materials, 2nd edition, Chapman & Hall, London (1994).
40. A. Dlouhy: Scripta mater., in preparation.
41. A. Dronhofer, J. Pešicka, G. Eggeler: J. Phys. IV France 11 (2001) Pr8-235.
42. J.A. Venables, C.J. Harland: Phil. Mag. 27 (1973) 1193.
43. L. Reimer: Scanning Electron Microscopy - Physics of Image Formation and Micro Analysis, Springer Verlag, Berlin (1985).
44. D.J. Dingley, V. Randle: J. Mat. Sci. 27 (1992) 4545.
45. J. Greiser: Ph. D. Thesis Universität Stuttgart, Stuttgart (1999).
46. J.M. Howe: Interfaces in Materials, John Wiley & Sons, New York (1997).
47. G. Kurdjumov, G. Sachs: Zeitschrift für Physik 64 (1930) 325.
48. J.K. Mackenzie: Biometrica 45 (1958) 229.
49. F.C. Frank: Metall. Trans. A 19 (1988) 403.
50. A.P. Sutton, R.W. Balluffi: Interfaces in Crystalline Materials, Clarendon Press, Oxford (1995).
51. OIM DC Users Manual, TSL TexSEM Laboratories, Draper (2001).
52. H.J. Bunge: Int. Mater. Rev. 32 (1987) 265.
53. J.W. Christian: The Theory of Transformations in Metals and Alloys, Pergamon Press, Oxford (1965).
54. H. Berns: Stahlkunde für Ingenieure, Springer-Verlag, Berlin (1993).
55. J.W. Schinkel, P.L.E Rademakers, B.R. Drenth, C.P. Scheepens: J. Heat Treating 3 (1984) 237.
56. D.S. Liebermann, M.S. Wechsler, T.A. Read: J. Appl. Phys. 26 (1955) 473.
57. F. Yoshida, D. Terada, H. Nakashima, H. Abe, H. Haykawa, S. Zaefferer, in: As Ref. [6], p. 143.
58. V.M. Segal: Mater. Sci. Eng. A 197 (1995) 157.
59. G. Langford, M. Cohen, referred to in: W.C. Leslie: The Physical Metallurgy of Steels, Hemisphere Publishing Corporation, Washington (1981) 18.
60. W.C. Leslie, referred to in: G.R. Speich, K. Mills et al. (Eds.): Metals Handbook Ninth Edition, Vol. 9, American Society for Metals, Ohio (1985) 671.
61. O.D. Sherby, R.H. Klundt, A.K. Miller: Metall. Trans. A 8 (1977) 843.
62. M. Morris, J.L. Martin: Acta metall. 32 (1984) 1609.
63. D. Gaillard: Phil. Mag. A 51 (1985) 157.
64. W. Blum, P. Eisenlohr, F. Breutinger: Metall. Mater. Trans. A 33 (2002) 291.
65. W.D. Nix, B. Ilschner, in: P. Haasen, V. Gerold, G. Kostorz (Eds.), Strength of Metals and Alloys - ICSMA 5, Pergamon Press, Oxford (1979) 1053.