Fluoroscopy-based 3-D reconstruction of femoral bone cement: A new approach for revision total hip replacement

IEEE Transactions on Biomedical Engineering

Volumn 52, Issue 4, 2005, Pages 664-675

  De La Fuente, Matías ^a   Ohnsorge, Jörg A K ^b   Schkornmodau, Erik ^a   Jetzki, Stefanie ^a   Wirtz, Dieter C ^b   Radermacher, Klaus ^a  

^a RWTH AACHEN UNIVERSITY   (Germany)

^b UNIVERSITY HOSPITAL RWTH AACHEN   (Germany)

Author keywords

3 D reconstruction; CAOS; Computer assisted orthopaedic surgery; Fluoroscopic navigation; Revision total hip replacement; Robotics; X ray

Indexed keywords

COMPUTERIZED TOMOGRAPHY; DATA REDUCTION; IMAGE RECONSTRUCTION; IMPLANTS (SURGICAL); PHYSIOLOGICAL MODELS; THREE DIMENSIONAL;

BONE CEMENT VOLUMES; HIP REPLACEMENT; ROBOT-ASSISTED CEMENT REMOVAL; X-RAY IMAGES;

BONE CEMENT;

BONE CEMENT; PLASTIC;

ACCURACY; ANALYTICAL ERROR; ARTICLE; CALCULATION; CALIBRATION; COMPUTER ASSISTED TOMOGRAPHY; COMPUTER MODEL; EVALUATION; FEMUR; FLUOROSCOPY; HIP RADIOGRAPHY; HUMAN; IMAGE ANALYSIS; IMAGE PROCESSING; IMAGE RECONSTRUCTION; IMAGING SYSTEM; IMPLANT; ROBOTICS; SURGICAL TECHNIQUE; TECHNIQUE; THREE DIMENSIONAL IMAGING; TOTAL HIP PROSTHESIS;

ARTHROPLASTY, REPLACEMENT, HIP; BONE CEMENTS; CEMENTATION; DEBRIDEMENT; DEVICE REMOVAL; FEMUR; FLUOROSCOPY; IMAGING, THREE-DIMENSIONAL; INTRAOPERATIVE CARE; PHANTOMS, IMAGING; RADIOGRAPHIC IMAGE INTERPRETATION, COMPUTER-ASSISTED; REOPERATION; ROBOTICS; SURGERY, COMPUTER-ASSISTED; TREATMENT OUTCOME;

EID: 16444373050     PISSN: 00189294     EISSN: None     Source Type: Journal    
DOI: 10.1109/TBME.2005.844032     Document Type: Article

References (35)

1. D. C. Wirtz and F. U. Niethard, "Ursachen, Diagnostik und Therapie der aseptischen Hüftendoprothesenlockerung-eine Standortbestimmung," Zeitschrift für Orthopädie, vol. 135, no. 4, pp. 270-280, 1997.
2. H. Malchau, "Prognosis of total hip replacement. Update and validation of results from the Swedish national hip arthroplasty registry," in Proc. 67th Annu. Meeting American Academy of Orthopaedic Surgeons, Orlando, FL, 2000, pp. 1979-1998.
3. G. Valdivia, M. Dunbar, D. Parker, M. Woolfrey, S. MacDonald, R. McCalden, C. Rorabeck, and R. Bourne, "The John Charnley award: Three-dimensional analysis of the cement mantle in total hip arthroplasty," Clin. Orthop., no. 393, pp. 38-51, 2001.
4. R. Sanders, K. Koval, T. DiPasquale, G. Schmelling, S. Stenzler, and E. Ross. "Exposure of the orthopaedic surgeon to radiation," J. Bone Joint Surg., vol. 75-A, no. 3, pp. 326-330, 1993.
5. C. Mehlman and T. DiPasquale, "Radiation exposure to the orthopaedic surgical team during fluoroscopy: "How far away is far enough"," J. Orthop. Trauma, vol. 11, no. 6, pp. 392-398, 1997.
6. Y. Rampersaud, K. Foley, A. Shen, S. Williams, and M. Solomito, "Radiation exposure to the spine surgeon during fluoroscopically assisted pedicle screw insertion," in SPINE, vol. 25, 2000, pp. 2637-2645.
7. P. F. Sharkey and W. J. Hozack, "New techniques in cement removal for revision total hip arthroplasty," Curr. Opin. Orthop., vol. 7, no. 1, pp. 2-8, 1996.
8. M. Porsch and I. Schmidt, "Clinical experiences with an endoscopically controlled new device for extraction of the cement plug in hip revision arthroplasty," Hip Int., vol. 11, no. 3, pp. 165-167, 2001.
9. J. W. Taylor and C. H. Rorabeck, "Hip revision arthroplasty: Approach to the femoral side." Clin. Orthop. Related Res., no. 369, pp. 208-222, 1999.
10. S. Zhao, D. Robertson, G. Wang, B. Whiting, and K. Bae. "X-ray CT metal artifact reduction using wavelets: Can application for imaging total hip protheses," IEEE Trans. Med. Imag., vol. 19, no. 12, pp. 1238-1247, Dec. 2000.
11. R. Taylor, L. Joskowicz, B. Williamson, A. Gueziec, A. Kalvin, P. Kazanzides, R. VanVorhis, J. Yao, R. Kumar, A. Bzostek, A. Sahay, M. Borner, and A. Lahmer, "Computer-integrated revision total hip replacement surgery: Concept and preliminary results," Med. Image Anal., vol. 3, pp. 301-319. 1999.
12. W. Bargar, A. Bauer, and M. Borner, "Primary and revision total hip replacement using the Robodoc system," Clin. Orthop., no. 354, pp. 82-91, 1998.
13. K. Foley, D. Simon, and Y. Rampersaud, "Virtual fluoroscopy," Operative Tech. Orthop., vol. 10, no. 1, pp. 77-81, 2000.
14. P. Grangeat, "Analyze d'un system d'imagerie 3d par reconstruction a partir de radiographie x en gemetrie conique," Ph.D. disseration, Ecole Nationale Superieure des Telecommunications, Paris, France, 1987.
15. R. Ning, "Computer simulation of image intensifier-based computed tomography detector: Vascular application," Med. Phys., vol. 15, no. 2, pp. 188-192, 1988.
16. R. Fahrig, A. Fox, S. Lownie, and D. Holdsworth, "Use of a c-arm system to generate true three-dimensional computed rotational angiograms: Preliminary in vitro and in vivo results," AJNR Am. J. Neuroradiol, vol. 18, no. 8, pp. 1507-1514, 1997.
17. K. Wiesent, K. Barth, N. Navab, P. Durlak, T. Brunner, O. Schuetz, and W. Seissler, "Enhanced 3-D-reconstruction algorithm for C-arm systems suitable for interventional procedures," IEEE Trans. Med. Imag., vol. 19, no. 5, pp. 391-403, May 2000.
18. E. Euler, S. Wirth, K. Pfeifer, W. Mutschler, and A. Hebecker, "3D-imaging with an isocentric mobile C-arm," Electromedica, vol. 68, no. 2, pp. 122-126, 2000.
19. M. M. D. Ritter and R. Graumann, "Markerless navigation with the intraoperative imaging modality SIREMOBIL Iso-C 3D," Electromedica, vol. 70, no. 1, pp. 31-36, 2002.
20. K. Radermacher, J. Ohnsorge, M. de la Fuente, E. Schkommodau, and D. Wirtz, "Minaro-A new approach for minimal invasive total hip revision surgery," presented at the CAOS 2002, Santa Fe, NM, 2002.
21. L. Joskowicz, C. Milgrom, A. Simkin, L. Tockus, and Z. Yaniv, "FRACAS: A system for computer-aided image-guided long bone fracture surgery," J. Compuler-Aided Surg., vol. 3, no. 6, pp. 271-288, 1998.
22. R. Fahrig, M. Moreau, and D. W. Holdsworth, "Three-dimensional computed tomographic reconstruction using a C-arm mounted XRII: Correction of image intensifier distortion," Med. Phys., vol. 24, no. 7, pp. 1097-1106, 1997.
23. R. Liu, S. Rudin, and D. Bednarek, "Super-global distortion correction for a rotational C-arm image intensifier," Med. Phys., vol. 26, no. 9, pp. 1802-1810, 1999.
24. E. Groneschild, "The accuracy and reproducibility of a global method to correct for geometric distortion in the X-ray imaging chain," Med. Phys., vol. 24, no. 12, pp. 1875-1888, 1997.
25. -, "Correction for geometric image distortion in the X-ray imaging chain: Local technique versus global technique," Med. Phys., vol. 26, no. 12, pp. 1602-1616, 1999.
26. R. Tsai, "A versatile camera calibration technique for high accuracy 3-D machine vision metrology using off-the-shelf TV cameras and lenses," IEEE Trans. Robot. Automat., vol. RA-3, no. 4, pp. 323-344, Aug. 1987.
27. G. Brandt, K. Radermacher, S. Lavallee, H.-W. Staudte, and G. Rau, "A compact robot for image guided orthopaedic surgery-Concept and preliminary results," in Lecture Notes in Computer Science, J. Troccaz, E. Grimson, and R. Mösges, Eds. Berlin, Germany: Springer-Verlag, 1997, CVRMED II-MRCAS III'97, , pp. 767-777.
28. W. Martin and J. Aggarwal, "Volumetric descriptions of objects from multiple views," IEEE Trans. Pattern Anal. Mach. Intell., vol. PAMI-5, no. 2, pp. 150-159, Feb. 1983.
29. L. Caponetti and A. Fanelli, "Computer-aided simulation for bone surgery," IEEE Comput. Graph. Appl., vol. 13, no. 6, pp. 86-92, Nov. 1993.
30. B. Nikkhahe-Dehkordi, M. Bro-Nielsen, T. Darvann, C. Gramkow, N. Egund, and K. Hermann, "3D-reconstruction of the femoral bone using two X-ray images from orthogonal views," in Computer Assisled Radiology (CAR'96), H. Lemke, M. Vannier, K. Inamura, and A. Farman, Eds., 1996, pp. 1066-1068.
31. J. Foley, A. van Dam, S. Feiner, and J. Hughes, Computer Graphics: Principles and Practice, 2nd ed, ser. The Systems Programming. Reading, MA: Addison-Wesley, 1992.
32. G. Brandt, A. Zimolong, L. Carrat, P. Merloz, H. Staudte, S. Lavallee, K. Radermacher, and G. Rau, "CRIGOS-A compact robot for image-guided orthopaedic interventions," IEEE Trans. Inform. Technol. Biomed., vol. 3, no. 4, pp. 252-260, Dec. 1999.
33. K. Radermacher, M. de la Fuente, G. Brandt, A. Zimolong, E. Schkommodau, F. Portheine, and G. Rau, "Computer- und Robotertechnik für die bildgeführte Orthopädische Chirurgie," AT- Automatisierungstechnik, vol. 50, pp. 317-325, 2002.
34. T. Möller, "A fast triangle-triangle intersection test," JGTOOLS: J. Graphics Tools, vol. 2, no. 2, pp. 25-30, 1997.
35. M. Nogler, M. Krismer, C. Haid, M. Ogon, C. Bach, and C. Wimmer, "Excessive heat generation during cutting of cement in Robodoc hip-revision procedure," Acta. Orthop. Scand., vol. 72, no. 6, pp. 595-599, 2001.