Analytical Formulas for Film Thickness in Compacted Asphalt Mixture

Transportation Research Record

Volumn , Issue 1829, 2003, Pages 26-32

  Radovskiy, Boris ^a  

^a NONE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AGE HARDENING; BINDERS; COATED MATERIALS; COMPACTION; CONCRETE AGGREGATES; CONCRETE CONSTRUCTION; CONCRETE PAVEMENTS; DATA REDUCTION; MECHANICAL PERMEABILITY; POROSITY; SIZE DETERMINATION; STATISTICAL METHODS; SURFACE ROUGHNESS; TENSILE STRENGTH; VISCOSITY;

FILM THICKNESS; HARDENING RATES; PAVING MIXTURES;

ASPHALT;

EID: 1642517390     PISSN: 03611981     EISSN: None     Source Type: Journal    
DOI: 10.3141/1829-04     Document Type: Conference Paper

References (22)

1. Hinrichsen, J. A., and J. Heggen. Minimum Voids in Mineral Aggregate in Hot-Mix Asphalt Based on Gradation and Volumetric Properties. In Transportation Research Record 1545, TRB, National Research Council, Washington, D.C., 1996, pp. 75-79.
2. Anderson, R. M., and H. U. Bahia. Evaluation and Selection of Aggregate Gradations for Asphalt Mixtures Using Superpave. In Transportation Research Record 1583, TRB, National Research Council, Washington, D.C., 1997, pp. 91-97.
3. Kandhal, P. S., and S. Chakraborty. Evaluation of Voids in the Mineral Aggregate for HMA Paving Mixtures. NCAT Report 96-4. National Center for Asphalt Technology, Auburn, Ga., 1996.
4. Kandhal, P. S., K. Y. Foo, and R. B. Mallick. A Critical Review of VMA Requirements in Superpave. NCAT Report 98-1. National Center for Asphalt Technology, Auburn, Ga., 1998.
5. Nukunya, B., R. Roque, M. Tia, B. Birgisson. Evaluation of VMA and Other Volumetric Properties as Criteria for the Design and Acceptance of Superpave Mixtures. Journal of the Association of Asphalt Paving Technologists, Vol. 79, 2002, pp. 38-69.
6. Coree, B. J., and W. P. Hislop. A Laboratory Investigation into the Effects of Aggregate-Related Factors on Critical VMA in Asphalt Paving Mixtures. Journal of the Association of Asphalt Paving Technologists, Vol. 79, 2002, pp. 70-131.
7. Hudson, S. B., and R. L. Davis. Relationship of Aggregate Voidage to Gradation. Proceedings of the Association of Asphalt Paving Technologists, Vol. 34, 1965, pp. 574-593.
8. Coree, B. J., and W. P. Hislop. Difficult Nature of Minimum Voids in the Mineral Aggregate: Historical Perspective. In Transportation Research Record: Journal of the Transportation Research Board, No. 1681, TRB, National Research Council, Washington, D.C., 1998, pp. 148-156.
9. Campen, W. H., J. R. Smith, L. G. Erickson, and L. R. Mertz. The Relationship Between Voids, Surface Area, Film Thickness, and Stability in Bituminous Paving Mixtures. Proceedings of the Association of Asphalt Paving Technologists, Vol. 28, 1959, pp. 149-178.
10. Mix Design Methods for Asphalt Concrete (MS-02), 2d ed. Asphalt Institute, Lexington, Ky., 1963.
11. The Asphalt Handbook (MS-04), Asphalt Institute, Lexington, Ky., 1989.
12. Goode, J. F., and L. A. Lufsey. Voids, Permeability, Film Thickness versus Asphalt Hardening. Proceedings of the Association of Asphalt Paving Technologists, Vol. 34, 1965, pp. 430-463.
13. Kumar, A., and W. H. Goetz. Asphalt Hardening as Affected by Film Thickness, Voids, and Permeability in Asphaltic Mixtures. Proceedings of the Association of Asphalt Paving Technologists, Vol. 46, 1977, p. 571.
14. McLeod, N. W. Voids Requirements for Dense-Graded Bituminous Paving Mixtures. Special Technical Publication 252. ASTM, West Conshohocken, Pa., 1959.
15. Roberts, F. L., P. S. Kandhal, D. Y. Lee, and T. W. Kennedy. Hot Mix Asphalt Materials, Mixture Design, and Construction, 2nd ed. NAPA Education Foundation, Lanham, Md., 1996.
16. 16. Dalla Valle, J. M. Micromeritics: The Technology of Fine Particles. Pitman Publishing Corporation, New York, 1943.
17. Anderson, D. A., H. U. Bahia, and R. Dongré. Rheological Properties of Mineral Filler-Asphalt Mastics and Its Importance to Pavement Performance. In Effects of Aggregates and Mineral Fillers on Asphalt Mixture Performance, ASTM, Ann Arbor, Mich., 1992, pp. 131-153.
18. Shahrour, M. A., and B. Saloukeh. Effect of Quality and Quantity of Locally Produced Filler (Passing Sieve No. 200) on Asphaltic Mixtures in Dubai. In Effects of Aggregates and Mineral Fillers on Asphalt Mixture Performance, ASTM, Ann Arbor, Mich., 1992, pp. 187-206.
19. Yen, T. F. Asphaltic Material. In Encyclopedia of Polymer Science and Engineering, Supplementary Volume, 2nd ed. (J. L Kroschwit, ed.), John Wiley and Sons, New York, 1989, pp. 1-10.
20. Lu, B., and S. Torquato. Nearest-Surface Distribution Functions for Polydispersed Particle System. Physical Review A, Vol. 45, No. 8, 1992, pp. 5530-5544.
21. Torquato, S. Random Heterogeneous Materials: Microstructure and Macroscopic Properties. Springer-Verlag, New York, 2001.
22. Garboczi, E. J., and D. Bentz. Multiscale Analytical/Numerical Theory of Diffusivity of Concrete. Advanced Cement Based Materials, Vol. 8, 1998, pp. 77-88.