Fatigue of structures and materials in the 20th century and the state of the art

Materials Science

Volumn 39, Issue 3, 2003, Pages 307-333

  Schijve, J ^a   Yarema, S Ya ^b  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

FATIGUE OF MATERIALS; KNOWLEDGE ENGINEERING; STRUCTURES (BUILT OBJECTS);

HISTORICAL DEVELOPMENTS; PLENARY LECTURES;

MATERIALS SCIENCE;

ACCURACY; ANALYTIC METHOD; COMPUTER ANALYSIS; CONCENTRATION (PARAMETERS); DYNAMICS; ENDURANCE; ENGINEERING; EQUIPMENT DESIGN; EVALUATION; GEOMETRY; HISTORY; LABORATORY; MATERIAL FATIGUE; MATERIALS; MECHANICS; MICROSCOPY; MODEL; PHYSICAL PHENOMENA; PREDICTION; QUALITATIVE ANALYSIS; REVIEW; SCIENCE; SIMULATION; SPECTRUM; STATISTICAL ANALYSIS; STRESS; STRUCTURE ANALYSIS; TENSION; THEORETICAL STUDY;

EID: 1642304195     PISSN: 1068820X     EISSN: None     Source Type: Journal    
DOI: 10.1023/B:MASC.0000010738.91907.a9     Document Type: Review

References (109)

1. J. A. Ewing and J. C. W. Humfrey, "The fracture of metals under repeated alternations of stress," Phil. Trans. Roy. Soc., A200, 241-250 (1903).
2. R. E. Peterson, "Discussion of a century ago concerning the nature of fatigue, and review of some of the subsequent researches concerning the mechanism of fatigue," ASTM Bulletin, No. 164, 50-56 (1950).
3. S. Timoshenko, "Stress concentration in the history of strength of materials. The William M. Murray Lecture," Proc. SESA, 12, 1-12 (1954).
4. H. J. Gough, "Crystalline structure in relation to failure of metals, especially by fatigue," Proc. ASTM, 33, 3-114 (1933).
5. M. Hetényi, Handbook of Experimental Stress Analysis, Wiley, New York (1950).
6. J. Y. Mann, "Aircraft fatigue - with particular emphasis on Australian operations and research," in: Proc. of the 12th ICAF Symp. (Toulouse 1983), Centre d'Essais Aeronautique de Toulouse (1983).
7. W. Schütz, "A history of fatigue," Eng. Fract. Mech., 54, 263-300 (1996).
8. R. A. Smith, Fatigue Crack Growth, 30 Years of Progress, Pergamon (1986).
9. R. J. Sanfor (editor), Selected Papers on Foundations of Linear Elastic Fracture Mechanics, SEM Classic Papers, Vol. CP1, SPIE Milestone Series, Vol. MS 137 (1997).
10. D. Hanewinckel and H. Zenner, Fatigue Strength, a Collection of Facsimile, Historical Papers Until 1950, Technical University Clausthal (1989).
11. J. Y. Mann, Bibliography on the Fatigue of Materials, Components and Structures, Vols. 1-4, Covering 1838 to 1969, Pergamon (1970-1990).
12. J. Schijve, Fatigues of Structures and Materials, Kluwer AP, Dordrecht-Boston (2001).
13. E. Orowan, "Theory of the fatigue of metals," Proc. Roy. Soc. (A), 171, 79 (1939).
14. A. K. Head "The growth of fatigue cracks," Phil. Mag., 44, 925-938 (1953).
15. A. N. Stroh, "The formation of cracks as a result of plastic flow," Proc. Roy. Soc. (A), 223, 404 (1955).
16. P. J. E. Forsyth, "The application of 'fractography' to fatigue failure investigations," Roy. Aircraft Est., Tech. Note Met., 257 (1957).
17. D. A. Ryder, "Some quantitative information obtained from the examination of fatigue failure surfaces," Roy. Aircraft Est., Tech. Note Met., 288 (1958).
18. A. H. Cottrell and D. Hull, "Extrusion and intrusion by cyclic slip in copper," Proc. Roy. Soc. (A), 211-213 (1957).
19. N. F. Mott, "A theory of the origin of fatigue cracks," Acta Metallurgica, 6, 195-197 (1958).
20. "A discussion on work-hardening and fatigue in metals," Proc. Roy. Soc., Math. Phys. Sciences, 242, No. 1229 (1957).
21. B. L. Averbach, D. K. Felbeck, G. T. Hahn, and D. A. Thomas, "Fracture," in: Proc. of the Internat. Conf. on the Atomic Mechanisms of Fracture, Techn. Press, MIT, Wiley (1959).
22. P. J. E. Forsyth, The Physical Basis of Metal Fatigue, Blackie and Son, London (1969).
23. W. A. Backofen, "Formation of slip-band cracks in fatigue," in: Proc. of the Internat. Conf. on the Atomic Mechanisms of Fracture, Techn. Press, MIT, Wiley (1959), pp. 435-449.
24. S. Suresh, Fatigue of Materials (2nd edition), Cambridge University Press, Cambridge (1998).
25. Fatigue Crack Propagation, ASTM STP 415, pp. 131-180, 505-535 (1967).
26. J. Schijve, "The significance of fractography for investigations of fatigue crack growth under variable-amplitude loading," Fatigue Fract. Eng. Mater. Struct., 22, 87-99 (1999).
27. C. Q. Bowles, The Role of Environment, Frequency and Wave Shape During Fatigue Crack Growth in Aluminum Alloys, Doctoral-Degree Thesis, Delft University of Technology (1978). See also Report LR-270.
28. C. Q. Bowles and J. Schijve, "Crack tip geometry for fatigue cracks grown in air and vacuum," ASTM STP 811, 400-426 (1983).
29. D. Broek, P. de Rijk, and P. J. Sevenhuysen, The Transition of Fatigue Cracks in Alclad Sheet, Nat. Aerospace Lab., NLR, Amsterdam, TR M2100 (1962).
30. T. C. Lindley and C. E. Richards, "The relevance of crack closure to fatigue crack propagation," Mat. Sci. Eng., 14, 281-293 (1974).
31. F. A. Veer, The Effect of Shear Lips, Loading Transition, and Test Frequency on Constant ΔK and Constant-Amplitude Fatigue Tests, Doctoral-Degree Thesis, Delft University of Technology (1993).
32. J. Zuidema, Square and Slant Fatigue Crack Growth, Doctoral-Degree Thesis, Delft University of Technology (1995).
33. J. Schijve and W. J. Arkema, Crack Closure and the Environmental Effect on Fatigue Crack Growth, Delft University of Technology, Report LR-217 (1976).
34. G. R. Irwin, "Analysis of stresses and strains near the end of a crack traversing a plate," Trans. ASME, J. Appl. Mech., 24, 361-364 (1957).
35. P. C. Paris, M. P. Gomez, and W. E. Anderson, "A rational analytical theory of fatigue," Trend Eng., 13, 9-14 (1961).
36. S. Pearson, "Initiation of fatigue cracks in commercial aluminum alloys and the subsequent propagation of very short cracks," Eng. Fract. Mech., 7, 235-247 (1945).
37. R. J. H. Wanhill, Durability Analysis Using Short and Long Fracture Crack Growth Data, Aircraft Damage Assessment and Repair. Institute of Engineering, Barton, Australia (1991).
38. K. J. Miller, "The three thresholds for fatigue crack propagation," in: Fatigue and Fracture Mechanics, ASTM STP 1296 (1997), pp. 267-286.
39. J. Schijve, "Fatigue crack closure observations and technical significance," in: Mechanics of Fatigue Crack Closure, ASTM STP 982 (1988), pp. 5-34.
40. W. Elber, Fatigue Crack Propagation, Ph. D. Thesis, University of New South Wales, Australia (1968).
41. W. Elber, "The significance of fatigue crack closure," in: Damage Tolerance in Aircraft Structures, ASTM STP 486 (1971), pp. 230-242.
42. J. Schijve. "Fatigue crack growth under variable-amplitude loading," in: Fatigue and Fracture, ASM Handbook. Vol. 19 (1996), pp. 110-133.
43. L. F. Coffin, Jr., "Low cycle fatigue - A review," Appl. Math. Res., 1, 129 (1962).
44. S. S. Manson and M. H. Hirschberg, "Fatigue behavior in strain cycling in the low- and intermediate-cycle range," in: Fatigue, an Interdisciplinary Approach, Syracuse University, Syracuse (1964), pp. 133-178.
45. S. Stanzl-Tschegg and H. Mayer, "Fatigue in the very high cycle regime," in: Proc. of the Internat. Conf. (July 2001), Institute of Meteorology and Physics, University of Agricultural Sciences, Vienna (2001).
46. N. E. Frost, K. J. Marsh, and L. P. Pook, Metal Fatigue, Clarendon, Oxford, (1974).
47. "A guide for fatigue testing and the statistical analysis of fatigue data," ASTM STP 91A (1963).
48. R. S. Bellows, S. Muju, and T. Nicholas, "Validation of the step test method for generating Haigh diagrams for Ti-6Al-4V," Int. J. Fracture, 21, 687-697 (1999).
49. R. B. Heywood, Designing Against Fatigue, Chapman & Hall, London (1962).
50. J. M. Ramsden, The Geriatric Problem, Flight International (October 22) (1977), pp. 1201-1207.
51. H. Neuber, Kerbspannungslehre, Berlin, Springer (1937), English translation: J. W. Edwards, Theory of Notch Stresses, Ann Arbor, Michigan (1946).
52. H. Neuber, Kerbspannungslehre, Berlin, Springer (1937), English translation: J. W. Edwards, Theory of Notch Stresses, Ann Arbor, Michigan (1946).
53. R. E. Peterson, Stress Concentration Factors, Wiley, New York (1974).
54. P. Kühn and H. F. Hardrath, An Engineering Method for Estimating Notch-Size Effect in Fatigue Tests of Steel, NACA TN 2805 (1952).
55. E. Siebel and M. Stieler, "Significance of dissimilar stress distributions for cyclic loading" [in German], Z. Ver. Deut. Ing., 97, 146-148 (1955).
56. J. Schijve, "Fundamental aspects of predictions on fatigue crack growth under variable-amplitude loading," in: A. F. Blom and C. J. Beevers (editors), Theoretical Concepts and Numerical Analysis of Fatigue, Proc. Conf. Univ. of Birmingham, EMAS (1992), pp. 111-130.
57. D. P. Rooke and D. J. Cartwright, Stress Intensity Factors, Her Majesty's Stationary Office, London (1976).
58. H. Tada, P. C. Paris, and G. R. Irwin, The Stress Analysis Handbook (2nd edition), Paris Productions Inc., St. Lousis (1985).
59. Y. Murakami (editor), Stress Intensity Factors Handbook, Pergamon, Oxford (1987/1993).
60. A. Pålmgren, "The endurance of ball bearings" [in German], Z. Ver. Deut. Ing., 68, 339-341 (1924).
61. B. F. Langer, "Fatigue failure from stress cycles of varying amplitude," J. Appl. Mech., 4, A160-A162 (1937).
62. M. A. Miner, "Cumulative damage in fatigue," J. Appl. Mech., 12, A159-A164 (1945).
63. J. Schijve, Some Remarks on the Cumulative Damage Concept, Minutes 4th ICAF Conf. (Zürich, May 1956), Paper 2 (1956).
64. K. Heyer, Multi-Step Tests on Structural Elements [in German], Lilienthal-Gesellschaft für Luftfahrtforschung, Bericht 152 (1943).
65. C. R. Smith, "Fatigue-service life prediction based on tests at constant stress levels," Proc. SESA, 16, No. 1, 9 (1958).
66. J. F. Martin, T. H. Topper, and G. M. Sinclair, "Computer based simulation of cyclic stress-strain behavior with applications to fatigue," Mats. Res. Stand., 11, 23-28, 50 (1971).
67. R. M. Wetzel (editor), Fatigue Under Complex Loading: Analysis and Experiments, Advances in Engineering, Vol. 7, SAE (1977).
68. H. Neuber, "Theory of stress concentration for shear strained prismatic bodies with arbitrary nonlinear stress-strain law," Trans. ASME, J. Appl. Mech., 28, 544-550 (1961).
69. E. Haibach, Modified Linear Damage-Accumulation Hypothesis Taking into Account a Decrease in the Fatigue Strength in the Process of Fatigue Damage [in German], Lab für Betriebsfestigkeit, LBF, Darmstadt, TM Nr. 50 (1970).
70. European Prestandard, ENV 1999-2, May 1998 (1998).
71. H. F. Hardrath and E. C. Naumann, "Variable-amplitude fatigue tests on aluminum alloy specimens," in: Fatigue of Aircraft Structures, ASTM STP 274 (1960), pp. 125-138.
72. E. C. Naumann, H. R. Hardrath, and E. C. Guthrie, Axial Load Fatigue Tests of 2024-T3 and 7075-T6 Aluminum Alloy Sheet Specimens Under Constant- and Variable-Amplitude Loads, NASA Report TN D-212 (1959).
73. J. Schijve, The Accumulation of Fatigue Damage in Aircraft Materials and Structures, AGARDograph No. 157 (1972).
74. J. Schijve, "The significance of flight simulation fatigue tests," in: Durability and Damage Tolerance in Aircraft Design, Proc. of the 13th ICAF Symp. (Pisa, 1985), EMAS, Warley (1985), pp. 71-170.
75. J. Schijve, "Fatigue crack propagation in light alloy sheet material and structures," in: Advances in Aeronautical Sciences, Vol. 3, Pergamon Press (1961), pp. 387-408.
76. C. M. Hudson and H. F. Hardrath, Effects of Changing Stress Amplitude on the Rate of Fatigue Crack Propagation in Two Aluminum Alloys, NASA TN D-960 (1961).
77. W. J. Mills and R. W. Hertzberg, "The effect of sheet thickness on fatigue crack retardation in 2024-T3 aluminum alloy," Eng. Fract. Mech., 7, 705-711 (1975).
78. G. S. Petrak, "Strength level effects on fatigue crack growth and retardation," Eng. Fract. Mech., 6, 725-733 (1974).
79. J. Willenborg, R. M. Engle, and H. A. Wood, A Crack Growth Retardation Model Using an Effective Stress Concept, AFFDL-TR71-1, Air Force Fight Dynamic Laboratory, Dayton, OH (1971).
80. O. E. Wheeler, "Spectrum loading and crack growth," ASME Trans. J. Basic Eng., 94, 181-186 (1972).
81. U. H. Padmadinata, Investigation of Crack-Closure Prediction Models for Fatigue in Aluminum Sheet under Flight-Simulation Loading, Doctoral-Degree Thesis, Delft University of Technology (1990).
82. A. U. de Koning, A Simple Crack Closure Model for Prediction of Fatigue Crack Growth Rates Under Variable-Amplitude Loading, ASTM STP 743, 63-85 (1981).
83. U. H. Padmadinata and J. Schijve, "Prediction of fatigue crack growth under flight-simulation loading with the modified CORPUS model," in: C. E. Harris (editor), Advanced Structural Integrity Methods for Airframe Durability and Damage Tolerance, NASA Conf. Publ. 3274 (1994), pp. 547-562.
84. D. S. Dugdale, "Yielding of steel sheets containing slits," J. Mech. Phys. Solids, 8, 100-104 (1960).
85. H. D. Dill and C. R. Saff, "Spectrum crack growth prediction method based on crack growth surface displacement and contact analysis," in: Fatigue Crack Growth under Spectrum Loading, ASTM STP 595 (1976), pp. 306-319.
86. H. D. Dill, C. R. Saff, and J. M. Potter, "Effects of fighter attack spectrum and crack growth," in: Effects of Load Spectrum Variables on Fatigue Crack Initiation and Propagation, ASTM STP 714 (1980), pp. 205-217.
87. J. C. Newman, Jr., "A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading," in: Methods and Models for Predicting Fatigue Crack Growth under Random Loading, ASTM STP 748 (1981), pp. 53-84.
88. D. J. Dougherty, A. U. de Koning, and B. M. Hillberry, "Modelling high crack growth rates under variable-amplitude loading," in: Advances in Fatigue Lifetime Predictive Techniques, ASTM STP 1122 (1992), pp. 214-233.
89. G. S. Wang and A. F. Blom, "A strip model for fatigue crack growth predictions under general load conditions," Eng. Fract. Mech., 40, 507-533 (1991).
90. E. Gassner, "Strength experiments under cyclic loading in aircraft structures" [in German], Luftwissen, 6, 61-64 (1939).
91. A. Teichmann, "Basic consideration of fatigue durability in service" [in German], Jahrbuch der Deutschen Luftfahrtforschung, 1,467-471 (1941).
92. F. Seewald, "Measurements with a glass scratching recorder of the German Institute for Aeronautics" [in German], Maschinenbau, 10, 725-727 (1931).
93. J. Taylor, "Measurements of gust loads in aircraft," J. Roy. Aero. Soc., 57, 78-88 (1953).
94. Data of the Fokker Aircraft Industry (1980).
95. Proceedings of the 20th Symposium on Aircraft Integrated Monitoring Systems (2000), Tech. Univ. Münich, Faculty Maschinenwesen (2000).
96. Y. Murakami (editor), The Rainflow Method in Fatigue, The Tatsuo Endo Memorial Volume, Butterworth-Heinemann, Oxford (1992).
97. A. Burns, Fatigue Loadings in Flight: Loads in the Tailplane and Fin of a Varsity, A.R.C. Tech. Report C.P. 256, London (1956).
98. Standard Practices for Cycle Counting in Fatigue Analysis, ASTM Standard E 1049-90 (1990).
99. J. Branger, The Full-Scale Fatigue Test on the DH-112 Venom., Eidg. Flugzeugwerk Emmen, F&W S-162 (1964).
100. J. Schijve, "Fatigue predictions and scatter," Fatigue Fract. Eng. Mater. Struct., 17, 381-396 (1994).
101. R. Adenstedt, Scatter of Fatigue Strength [in German], Doctoral-Degree Thesis, Technical University of Clausthal (2001).
102. D. Radai, "Review of fatigue strength assessment of nonwelded and welded structures based on local parameters," Int. J. Fatigue, 18, 153-170 (1996).
103. M. Skorupa, "Local interaction effects during fatigue crack growth under variable-amplitude loading - A literature review. Part I: Empirical trends, Part II: Qualitative interpretation," Fatigue Fract. Eng. Mater. Struct., 21, 987-1006; 22, 905-926.
104. M. Skorupa, "Local interaction effects during fatigue crack growth under variable-amplitude loading - A literature review. Part I: Empirical trends, Part II: Qualitative interpretation," Fatigue Fract. Eng. Mater. Struct., 21, 987-1006; 22, 905-926.
105. U. G. Goranson, "Continuous airworthiness of aging aircraft," in: Proc. of the 2nd Annual Internat. Conf. on Aging Aircraft, Federal Aviation Admin, of the U.S. Dept. of Trans., Baltimore (1989), pp. 61-89.
106. C. R. Saff and D. R. Holloway, "Evaluation of crack growth gages for service life tracking," in: 13th Conf. on Fracture Mechanics, ASTM STP 743 (1981), pp. 623-640.
107. R. J. H. Wanhill, E. A. B. de Graaf, and A. A. M. Delii, "Significance of a rotor blade failure for fleet operation, inspection, maintenance, design, and certification," in: Fifth Europ. Rotorcraft and Powered Lift Aircraft Forum (Amsterdam, September 1979), Paper 38, Amsterdam (1979).
108. A. G. Flatau and K. P. Chong, "Dynamic start material and structural systems," Eng. Struct., 24, 261-270 (2002).
109. K. J. Miller, Structural Integrity - Whose Responsibility?, The 36th John Player Memorial Lecture, Institute of Mechanical Engineers (2001).