Prediction of the growth rate for fatigue cracks emanating from cold expanded holes

International Journal of Fatigue

Volumn 26, Issue 6, 2004, Pages 585-595

  Lacarac, V D ^a   Garcia Granada, A A ^a   Smith, D J ^a   Pavier, M J ^a  

^a UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

Cold expansion; Fatigue crack growth; Finite element analysis; Residual stress

Indexed keywords

AIRCRAFT PARTS AND EQUIPMENT; COMPUTER SIMULATION; CRACK PROPAGATION; DATA REDUCTION; FASTENERS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; RESIDUAL STRESSES;

COLD EXPANDED HOLES; GROWTH RATES;

FATIGUE OF MATERIALS;

EID: 1642278723     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2003.10.015     Document Type: Article

References (42)

1. Petrak G.J., Stewart R.P. Retardation of cracks emanating from fastener holes. Eng Fract Mech. 6:1974;275-282.
2. Pavier M.J., Poussard C.G.C., Smith D.J. A finite element simulation of the cold working process for fastener holes. J Strain Anal. 32:1997;287-300.
3. Poussard C., Pavier M.J., Smith D.J. Analytical and finite element predictions of residual stresses in cold worked fastener holes. J Strain Anal. 30:1995;291-304.
4. Priest M., Poussard C.G., Pavier M.J., Smith D.J. An assessment of residual stress measurements around cold-worked holes. Exp Mech. 35:1995;361-366.
5. Rufin A.C. Extending the fatigue life of aircraft engine components by hole cold expansion technology. J Eng Gas Turbines Power. 115:1993;165-171.
6. Forgues SA, Bernard M, Bui-Quoc T. 3D axisymmetric numerical analysis and experimental study of the fastener hole coldworking process. Computer methods and experimental measurements for surface treatment effects. Southampton, UK: Computational Mechanics Publications; 1993. p. 61-70.
7. Pavier M.J., Poussard C.G.C., Smith D.J. Three dimensional finite element analysis of the interaction of residual stress around cold worked holes with mechanical load. J Strain Anal. 33:1998;275-289.
8. Papanikos P., Meguid S.A. Three-dimensional analysis of cold expansion of adjacent holes. Int J Mech Sci. 40:1998;1019-1028.
9. Chandawanich N., Sharpe W.N. Jr. An experimental study of fatigue crack initiation and growth from coldworked holes. Eng Fract Mech. 11:1979;609-620.
10. Pell R.A., Beaver P.W., Mann J.Y., Sparrow J.G. Fatigue of thick-section cold-expanded holes with and without cracks. Fatigue Fract Eng Mater Struct. 12:(6):1989;553-567.
11. Arora P.R., Dattaguru B., Subramanya Hande H.S. The fatigue crack growth in L-72 Al-alloy plate specimens with cold worked holes. Eng Fract Mech. 42:(6):1992;989-1000.
12. Kliman V., Bily M., Prohacka J. Improvement of fatigue performance by cold hole expansion. Part 2. Experimental verification of proposed model. Int J Fatigue. 15:(2):1993;101-107.
13. Bernard M., Bui-Quoc T., Burlat M. Effect of re-coldworking on fatigue life enhancement of a fastener hole. Fatigue Fract Eng Mater Struct. 18:1995;765-775.
14. Toparli M., Ozel A., Aksoy T. Effect of the residual stresses on the fatigue crack growth behavior at fastener holes. Mater Sci Eng. A225:1997;196-203.
15. Lim W., Yoo J., Choi S. The effect of concurrent cold expansion and ring-indentation on the growth of fatigue cracks emanating from circular holes. Eng Fract Mech. 59:(5):1998;643-653.
16. Ball D.L., Lowri D.R. Experimental investigation on the effect of cold expansion of fastener holes. Fatigue Fract Eng Mater Struct. 21:1998;17-34.
17. Lacarac V., Smith D.J., Pavier M.J., Priest M. Fatigue crack growth from plain and cold expanded holes in aluminium alloys. Int J Fatigue. 22:2000;189-203.
18. Lacarac V.D., Smith D.J., Pavier M.J. The effect of cold expansion on fatigue crack growth from open holes at room and high temperature. Int J Fatigue. 23:2001;S161-S170.
19. Cathey W.H., Grandt A.F. Jr. Fracture mechanics consideration of residual stresses introduced by cold working fastener holes. J Eng Mater Technol. 102:1980;85-91.
20. Clark G. Modeling of residual stresses and fatigue crack growth at cold-expanded fastener holes. Fatigue Fract Eng Mater Struct. 14:(5):1991;579-589.
21. Pavier M.J., Poussard C.G.C., Smith D.J. Effect of residual stress around cold worked holes on fracture under superimposed mechanical load. Eng Fract Mech. 63:(6):1999;751-773.
22. Lei Y., O'Dowd N.P., Webster G.A. Fracture mechanics analysis of a crack in a residual stress field. Int J Fract. 106:(3):2000;195-216.
23. Lin X.B., Smith R.A. Stress intensity factors for semi-elliptical internal surface cracks in autofrettaged thick-walled cylinders. J Strain Anal. 32:(5):1997;351-363.
24. Lin X.B., Smith R.A. Fatigue shape analysis for corner cracks at fastener holes. Eng Fract Mech. 59:(1):1998;73-87.
25. de Rijck J.J.M., Fawaz S.A. Stress intensity factors and crack interaction in adjacent holes. Eng Fract Mech. 68:(7):2001;963-969.
26. Polmear I.J., Pons G., Octor H., Sanchez C., Morton A., Borbridge W. After concorde: evaluation of an Al-Cu-Mg-Ag alloy for use in the proposed European SST. Mater Sci Forum. 217-222:1996;1759-1764.
27. Chen P.C.T. The Bauschinger and hardening effect on residual stresses in an autofrettaged thick-walled cylinder. ASME J Pressure Vessel Technol. 108:1986;108-112.
28. ASTM. Standard test method for measurement of fatigue crack growth rates, E647-95. West Conshohocken, PA: American Society for Testing and Materials; 1996.
29. Newman J.C., Raju I.S. Stress intensity factor equations for cracks in three-dimensional finite bodies. Lewis J.C., Sines G. Theory and Analysis. Fracture mechanics, XIV symposium. vol. 1:1983;I238-I265 American Society for Testing and Materials, West Conshohocken, PA. [ASTM STP 791].
30. Suresh S. Fatigue of materials. Cambridge solid state science series. 1991;Cambridge University Press, Cambridge, UK.
31. Garcia-Granada A.A., Pavier M.J., Smith D.J. A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses. Int J Mech Sci. 42:2001;1027-1047.
32. Garcia-Granada A.A., Pavier M.J., Smith D.J. A new procedure based on Sachs' boring for measuring non-axisymmetric residual stresses: experimental application. Int J Mech Sci. 43:(12):2001;2753-2768.
33. Garcia-Granada A.A., Lacarac V.D., Holdway P., Smith D.J., Pavier M.J. Creep relaxation of residual stresses around cold expanded holes. J Eng Mater Technol. 123:(1):2001;125-131.
34. Smith D.J., Poussard C.G.C., Pavier M.J. An assessment of the Sachs method for measuring residual stresses in cold worked fastener holes. J Strain Anal. 33:1998;263-274.
35. Fatigue Technology Inc. TI 401 Andover Park, East Tukwila (Seattle), WA 98188, USA.
36. Garcia-Granada AA. The effect of creep and mechanical load on cold expanded fastener holes. PhD thesis, University of Bristol, 2000.
37. Lacarac V. Residual stresses and fatigue crack growth from cold expanded holes in Al 2650 at room and high temperature. PhD thesis, University of Bristol, 2000.
38. Anderson T.L. Fracture mechanics: fundamentals and applications. 1995;CRC Press, Boca Raton, FL.
39. Ezeilo A.N., Webster P.S., Webster G.A., Webster P.J. Influence of cyclic loading on residual stress distribution caused by cold hole expansion. Proceedings of the Fourth International conference on residual stresses, Baltimore, USA: 1994;1275-1284.
40. Holdway P., Cook R. Effect of cold expansion on the residual stress distribution and fatigue properties in Al alloy 7050 containing fastener holes with residual fatigue cracks. Proceedings of ICRS 5, Linkoping, Sweden: 1997;292-296.
41. Holdway P., Cook R., Bowen A.W. Residual stress distribution and fatigue properties of aluminium-lithium 8090 plate containing plain and cold-expanded holes. Proceedings of ICRS 4, 8-10 June 1994, Baltimore, MD, USA: 1994;1046-1054 SEM.
42. Ozdemir A.T., Edwards L. Relaxation of residual stresses at cold-worked fastener holes due to fatigue loading. Fatigue Fract Eng Mater Struct. 20:(10):1997;1443-1451.