Vibration modeling of bladed disks subject to geometric mistuning and design changes

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn 3, Issue , 2004, Pages 1931-1950

  Lim, Sang Ho ^a   Castanier, Matthew P ^a   Pierre, Christophe ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACCELERATION; DEGREES OF FREEDOM (MECHANICS); FINITE ELEMENT METHOD; GEOMETRY; MACHINE DESIGN; MONTE CARLO METHODS; NATURAL FREQUENCIES; VIBRATIONS (MECHANICAL);

BLADED DISKS; GEOMETRIC MISTUNING; REDUCED ORDER MODELING (ROM); VIBRATION MODELING;

DISKS (MACHINE COMPONENTS);

EID: 16244401649     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2004-1686     Document Type: Conference Paper

References (27)

1. Whitehead, D. S., "Effect of Mistuning on the Vibration of Turbomachine Blades Induced by Wakes," Journal Mechanical Engineering Science, Vol. 8, No. 1, 1966, pp. 15-21.
2. Dye, R. C. F. and Henry, T. A., "Vibration Amplitudes of Compressor Blades Resulting From Scatter in Blade Natural Frequencies," ASME Journal of Engineering for Power, Vol. 91, No. 3, 1969, pp. 182-188.
3. Wagner, J. T., "Coupling of Turbomachine Blade Vibrations Through the Rotor," ASME Journal of Engineering for Power, Vol. 89, No. 4, 1967, pp. 502-512.
4. Ewins, D. J. and Han, Z. S., "Resonant Vibration Levels of a Mistuned Bladed Disk," ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 106, No. 2, 1984, pp. 211-217.
5. El-Bayoumy, L. E. and Srinivasan, A. V., "Influence of Mistuning on Rotor-Blade Vibrations," AIAA Journal, Vol. 13, No. 4, 1975, pp. 460-464.
6. Griffin, J. H. and Hoosac, T. M., "Model Development and Statistical Investigation of Turbine Blade Mistuning," ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 106, 1984, pp. 204-210.
7. Lin, C.-C. and Mignolet, M. P., "An Adaptive Perturbation Scheme for the Analysis of Mistuned Bladed Disks," ASME Journal of Engineering for Gas Turbines and Power, Vol 119, No. 1, 1997, pp. 153-160.
8. Wei, S. T. and Pierre, C., "Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry, Part I: Free Vibrations," ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 110, No. 4, 1988, pp. 429-438.
9. Óttarsson, G. S. and Pierre, C., "On the Effects of Interblade Coupling on the Statistics of Maximum Forced Response Amplitudes in Mistuned Bladed Disks," AIAA Paper 95-1494, Proceedings of the 36th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Vol. 5, AIAA, New York, NY, 1995, pp. 3070-3078.
10. Castanier, M. P., Óttarsson, G., and Pierre, C., "A Reduced-Order Modeling Technique for Mistuned Bladed Disks," Journal of Vibration and Acoustics, Vol. 119, No. 3, 1997, pp. 439-447.
11. Bladh, R., Castanier, M. P., and Pierre, C., "Reduced Order Modeling and Vibration Analysis of Mistuned Bladed Disk Assemblies with Shrouds," ASME Journal of Engineering for Gas Turbines and Power, Vol. 121, No. 3, 1999, pp. 515-522.
12. Bladh, R., Castanier, M. P., and Pierre, C., "Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks - Part I: Theoretical Models," ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 1, 2001, pp. 89-99.
13. Moyroud, F., Fransson, T., and Jacquet-Richardet, G., "A comparison of two finite element reduction techniques for mistuned bladed disks," Journal of Engineering for Gas Turbines and Power, Vol. 124, No. 4, 2002, pp. 942-952.
14. Yang, M.-T. and Griffin, J. H., "A Reduced Order Model of Mistuning Using a Subset of Nominal System Modes," ASME Journal of Engineering for Gas Turbines and Power, Vol. 123, 2001, pp. 893-900.
15. Lim, S., Bladh, R., Castanier, M. P., and Pierre, C., "A Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk Vibration," AIAA Paper 20003-1545, Proceedings of the 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Conference, Vol. 2, AIAA, 2003, pp. 1359-1380.
16. Irretier, H., "Spectral Analysis of Mistuned Bladed Disk Assemblies by Component Mode Synthesis," Vibrations of Bladed Disk Assemblies, ASME, New York, 1983, pp. 115-125.
17. Gu, K. and Tongue, B. H., "Method to improve the modal convergence for structures with external forcing," ASME Journal of Applied Mechanics, Vol. 54, No. 4, 1987, pp. 904-909.
18. Cai, C. W., Cheung, Y. K., and Chan, H. C., "Mode Localization Phenomena in Nearly Periodic Systems," ASME Journal of Applied Mechanics, Vol. 62, No. 1, 1995, pp. 141-149.
19. Shyu, W.-H., Ma, Z.-D., and Hulbert, G. M., "A New Component Mode Synthesis Method: Quasi-Static Mode Compensation," Finite Elements in Analysis and Design, Vol. 24, 1997, pp. 271-281.
20. Shyu, W.-H., Gu, J., Hulbert, G. M., and Ma, Z.-D., "On the use of multiple quasi-static mode compensation sets for component mode synthesis of complex structures," Finite Elements in Analysis and Design, Vol. 35, 2000, pp. 119-140.
21. Craig, R. R., "Structural Dynamics, An Introduction to Computer Methods", Wiley, New York, 1981.
22. Joseph, J. A., "Cyclic Symmetry in MSC/NASTRAN," MSC/NASTRAN Application Manual, chap. 3.2, The MacNeal-Schwendler Corporation, 1981, pp. 10-24.
23. Elchuri, V., Smith, G. C. C., and Gallo, A. M., "NASTRAN Forced Vibration Analysis of Rotating Cyclic Structures," ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 106, 1984, pp. 224-234.
24. Hitchings, D. and Singh, M., "Cyclic Symmetry Through Constraint Equations with Application to the Analysis of Steam Turbines," in Bladed Disk Assemblies, Proceedings of the ASME 11th Biennial Conference on Mechanical Vibration and Noise, Boston, Massachusetts, 1987, pp. 113-119.
25. Pierre, C., "Mode Localization and Eigenvalue Loci Veering Phenomena in Disordered Structures," Journal of Sound and Vibration, Vol. 126, No. 3, 1988, pp. 485-502.
26. Bladh, R., Castanier, M. P., Pierre, C., and Kruse, M. J., "Dynamic Response Predictions for a Mistuned Industrial Turbomachinery Rotor Using Reduced Order Modeling," ASME Journal of Engineering for Gas Turbines and Power, Vol. 124, No. 2, 2002, pp. 311-324.
27. Bladh, R., Castanier, M. P., and Pierre, C., "Effects of Multistage Coupling and Disk Flexibility on Mistuned Bladed Disk Dynamics," ASME Journal of Engineering for Gas Turbines and Power, Vol. 125, No. 1, 2003, pp. 121-130.