Release dynamic process identification for a cement based material in various leaching conditions. Part I. Influence of leaching conditions on the release amount

Journal of Environmental Management

Volumn 74, Issue 2, 2005, Pages 141-151

  Barna, Radu ^a   Rethy, Zoltan ^b   Tiruta Barna, Ligia ^c  

^a ECOLE DES MINES D ALBI CARMAUX   (France)

^b University of Godollo   (Hungary)

^c UNIVERSITÉ DE LYON   (France)

Author keywords

Geochemical modelling; Hydrodynamics; Leaching test; Solidified stabilized waste

Indexed keywords

CADMIUM COMPOUNDS; GRANULAR MATERIALS; LEACHING; LEAD OXIDE; POROUS MATERIALS; PORTLAND CEMENT; WATER POLLUTION;

CA 2+; CONDITION; EXCHANGE SURFACES; GEOCHEMICAL MODELS; LEACHING TEST; LIQUID SOLIDS; S RATIO; SO 4 2-; SOLIDIFIED/STABILIZED WASTE; TARGET ELEMENT;

HYDRODYNAMICS;

CADMIUM; CADMIUM OXIDE; CALCIUM ION; CEMENT; LEAD; LEAD OXIDE; POTASSIUM ION; SODIUM ION; SULFATE;

CEMENT; GRANULAR MEDIUM; HYDRODYNAMICS; LEACHING; POLLUTANT TRANSPORT;

ARTICLE; DISSOLUTION; HYDRODYNAMICS; LEACHING; MATERIALS TESTING; METHODOLOGY; MODEL; PH; POROSITY; SURFACE PROPERTY;

EID: 15844398268     PISSN: 03014797     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jenvman.2004.06.016     Document Type: Article

References (26)

1. F. Adenot M. Buil Modelling of the corrosion of the cement paste by deionised water Cement and Concrete Research 22 1992 489-496
2. R. Barna F. Sanchez P. Moszkowicz J. Méhu Leaching behavior of pollutants in stabilized/solidified wastes Journal of Hazardous Materials 52 1997 287-310
3. R. Barna Z. Rethy A. Imyim Y. Perrodin P. Moszkowicz L. Tiruta-Barna Environmental behaviour of construction made of a mixture of hydraulic binders and air pollution control residues from municipal waste incineration - Part 1. Physico-chemical characterisation and modelling of the source term Waste Management 20 2000a 741-750
4. R. Barna Z. Rethy Y. Perrodin P. Moszkowicz L. Tiruta-Barna Environmental behaviour of construction made of a mixture of hydraulic binders and air pollution control residues from municipal waste incineration - Part 2. Simulation tests and validation of the source term modelling Waste Management 20 2000b 751-759
5. B. Batchelor A numerical leaching model for solidified/stabilized wastes Water Science Technology 26 1992 107-115
6. C.M. Bethke Geochemical Reaction Modeling: Concepts and Applications 1996 Oxford University Press New York
7. P. Coté T. Constable An evaluation of cement-based waste forms using the results of approximately two years of dinamic leaching Nuclear and Chemical Waste Mangement 7 1987 129-139
8. ECS European Committee for Standardization, 1994. Methods of Testing Cement - Part 1: Determination of Strength. EN 196-1
9. ECS European Committee for Standardization CEN/TC 292/WG 6, 1997. Basic characterization of leaching behavior in specified conditions. European standard ENV 12 920
10. ECS European Committee for Standardization CEN/TC 292/WG 6, 2002. Up flow percolation test - characterisation of waste-leaching behaviour test. prEN 14405
11. P. Faucon F. Adenot J.F. Jacquinot J.C. Petit R. Cabrillac M. Jorda Long-term behaviour of cement pastes used for nuclear waste disposal: review of physico-chemical machanisms of water degradation Cement and Concrete Research 28 1998 847-857
12. Hinsenveld, M., 1992. A shrinking core model as a fundamental representation of leaching mechanisms in cement stabilized waste. PhD Dissertation, University of Cincinnati, Cincinnati, OH
13. Imyim, A., 2000. Méthodologie d'évaluation environnementale des déchets stabilisés/solidifiés par liants hydrauliques. PhD Thesis, National Institute of Applied Sciences, Lyon, France
14. A. Imyim L. Tiruta-Barna R. Barna J. Méhu Prediction of inorganic pollutant release from various cement based materials in disposal/ utilisation scenario based on the application of a multi-parameter leaching tool box Waste Management Series 1 2000a 318-324
15. A. Imyim P. Moszkowicz L. Tiruta-Barna F. Sanchez R. Barna J. Méhu Mise au point d'une boîte à outils de tests de lixiviation pour l'évaluation du flux de polluants émis d'un déchet solide Déchets Sciences et Techniques 18 2000b 15-23
16. D.S. Kosson H.A. van der Sloot T.T. Eighmy An approach for estimation of contaminant release during utilization and disposal of municipal waste combustion residues Journal of Hazardous Materials 47 1996 43-75
17. J. Méhu P. Moszkowicz R. Barna P. Philippe V. Mayeux French qualification procedure for solidification processes. In: J.J.M. Goumans H.A. van der Sloot Th.G. Albers (Eds.). Environmental Aspects of Construction with Waste Materials Proceedings of the International Conference, WASCON'94 1994 Elsevier Amsterdam 281-292
18. P. Moszkowicz F. Sanchez R. Barna J. Méhu Pollutants leaching behaviour from solidified wastes: A selection of adapted various models Talanta 46 1998 375-383
19. NNI, 1994. NEN 7345. Leaching characteristics of building and solid waste materials-leaching tests: Determination of the leaching behavior of inorganic components from shaped building materials, monolithic and stabilized waste materials, The Netherlands
20. Réthy, Z., 2001. Etude du comportement à la lixiviation d'un matériau à base de liant hydraulique contenant des polluants solubles. Rôle des conditions de contact solide/liquide. PhD Thesis, National Institute of Applied Sciences, Lyon, France
21. F. Sanchez R. Barna A. Garrabrants D.S. Kosson P. Moszkowicz Environmental assessment of a cement-based solidified soil contaminated with lead Chemical Engineering Science 55 1999 113-128
22. L. Tiruta-Barna A. Imyim R. Barna J. Méhu Prediction of inorganic pollutant release from various cement based materials in disposal/ utilisation scenario based on the application of a multi-parameter leaching tool box. In: G.R. Wooley J.J.J.M. Goumans P.J. Wainwriwrigth (Eds.). Prediction of Inorganic Pollutant Release from Various Cement Based Materials in Disposal/Utilisation Scenario based on the Application of a Multi-parameter Leaching Tool Box 2000a Pergamon Press New York 318-324
23. L. Tiruta-Barna R. Barna P. Moszkowicz H.R. Bae Distributed mass transfer rate for modelling the leaching of porous granular materials containing soluble pollutants Chemical Engineering Science 55 2000b 1257-1267
24. L. Tiruta-Barna R. Barna P. Moszkowicz Modelling of solid/liquid/gas mass transfer for environmental evaluation of cement-based solidified waste Environmental Science and Technology 35 2001 149-156
25. H.A. van der Sloot P.L. Cote Modelling chemical interactions at a waste/ waste interface Environmental Technology Letters 10 1989 969-976
26. H.A. van der Sloot L. Heasman Ph. Quevauviller Harmonisation of Leaching/ Extraction Tests 1997 Elsevier Amsterdam (Chapters 9 and 10)