Health monitoring and reliability of adaptive heterogeneous structures

Structural Health Monitoring

Volumn 1, Issue 1, 2002, Pages 23-39

  Garg, Devendra P ^a   Zikry, Mohammed A ^b   Anderson, Gary L ^c   Stepp, David ^c  

^a DUKE UNIVERSITY   (United States)

^b NORTH CAROLINA STATE UNIVERSITY   (United States)

^c U S ARMY RESEARCH OFFICE   (United States)

Author keywords

Active materials; Adaptive structures; Heterogeneous structures; MEMS; Reliability; Sensors

Indexed keywords

EID: 1542359725     PISSN: 14759217     EISSN: None     Source Type: Journal    
DOI: 10.1177/147592170200100103     Document Type: Article

References (62)

1. Wang, C, Wu, F. and Chang, F. (2001). Structural health monitoring from fiber-reinforced composites to steel-reinforced concrete. Smart Materials and Structures, 10, 548-552.
2. Blaise, E. and Chang, F. (2002). Built-in diagnostics for debonding in sandwich structures under extreme temperatures. In F.-K. Chang (Ed.) Structural health monitoring: the demands and challenges (pp. 154-163), CRC Press.
3. Pradhan, S.C., Ng, T.Y., Lam, K.Y. and Reddy, J. N. (2001). Control of laminated composite plates using magnetostrictive layers. Smart Materials and Structures, 10, 1-11.
4. Reddy, J.N. and Krishnan, S. (2001). A vibration control of laminated pates using embedded smart layers. Structural Mechanics and Engineering, 12, 135-156.
5. Schulz, M.J., Kirikera, G.R., Datta, S. and Sundaresan, M.J. (2002). Piezoceramic and nanotube materials for health monitoring. Paper number 4702-03, In: Proceeding of the SPIE 7th International Symposium on NDE for Health Monitoring and Diagnostics, 17-21 March.
6. Adams, D.E. (2001). Integrated diagnostics and reliability forecasting for hybrid structures through similarity modeling of non-linearity, time variance, and uncertainty. ARO Research Proposal Number 42614-EG.
7. Feng, M., De Flaviis, F. and Kim, Y. (2002). Use of microwaves for damage detection of fiber reinforced polymer-wrapped concrete structures. Journal of Engineering Mechanics - ASCE, 128(2), 172-183.
8. Vaidya, U., Jadhav, N. and Hosur, M. et. al. (2000). Assessment of flow and cure monitoring using direct current and alternating current sensing in vacuum-assisted resin transfer molding. Smart Materials and Structures, 9(6), 727-736.
9. Todd, M., Johnson, G. and Althouse, B. (2001). A novel bragg grating sensor interrogation system utilizing a scanning filter, a Mach-Zehnder interferometer and a 3x3 coupler. Measurement Science and Technology, 12(7), 727-736.
10. Sage, I., Badcock, R. and Humberstone, L. et. al. (1999). Triboluminescent damage sensors. Smart Materials and Structures, 8(4), 504-510.
11. Grondel, S., Delebarre, C. and Assaad, J. et. al. (2002). Fatigue crack monitoring of riveted aluminum strap joints by lamb wave analysis and acoustic emission measurement techniques. NDT&E International, 35(3), 137-146.
12. Kumar, C., Rao, V. and Raja, V. et. al. (Mar 2002). Corrosion behavior of solar reflector coatings on AA 2024T3 - an electrochemical impedance spectroscopy study. Corrosion Science, 44(3), 387-393.
13. Pines, D. and Lovell, P. (1998). Conceptual framework of a remote wireless health monitoring system for large civil structures. Smart Materials and Structures, 7(5), 627-636.
14. Farnan, I. and Salje, E. (2001). The degree and nature of radiation damage in zircon observed by Si-29 nuclear magnetic resonance. Journal of Applied Physics, 89(4), 2084-2090.
15. Wang, T. and Blum, F. (1996). Interfacial mobility and its effect on interlaminar fracture toughness in glass-fibre-reinforced epoxy laminates. Journal of Materials Science, 31(19), 5231-5238.
16. Sampson, N., Mrksich, M. and Bertozzi, C.R. (2001). Surface molecular recognition. In Proceedings of The National Academy of Sciences of The United States of America, Vol. 98, No. 23 (pp. 12870-12871). Nov 6.
17. Carlson, T., Feng, Y., Maisonpierre, P., Mrksich, M. and Morla, A. (2001). Direct cell adhesion to the angiopoietins mediated by integrins. Journal of Biological Chemistry, 276(28), 26516-26525.
18. Structural health monitoring: the demands and challenges. In F.-K. Chang (Ed.), Proceedings of the 3rd International Workshop on Structural Health Monitoring (1529p), Boca Raton, FL: CRC Press, 2001.
19. Udd, E. (1995). Fiber optic sensor overview. In E. Udd (Ed.), Fiber optical smart structures (pp. 155-170). New York, NY: John Wiley & Sons.
20. Chang, C. and Sirkis, J. (1997). Impact-induced damage of laminated graphite/epoxy composites monitored using embedded in-line fiber etalon optic sensors. Journal of Intelligent Materials, Systems, and Structures, 8(10), 829-841.
21. Islam, A. and Crag, K. (1994). Damage detection in composite structures using piezoelectric materials. Smart Materials and Structures, 3, 318-328.
22. Atkan, A., Tsikos, C., Catbas, F., Grimmelsman, K. and Barrish, R. (1999). Challenges and opportunities in bridge health monitoring. In F.-K. Chang, (Ed.), Proceedings of the 2nd International Workshop on Structural Health Monitoring (pp. 461-473).
23. Sundaresan, M., Schulz, M., Ghoshal, A. and Pratap, P. (2001). A Neural system for structural health monitoring. Proceedings of the SPIE 8th International Symposium on Smart Materials and Structures, March.
24. Diaz Valdes, S. and Soutis, C. (2000). Health monitoring of composites using lamb waves generated by piezoelectric devices. Plastics, Rubber and Composites, 29(9), 475-481.
25. Worden, K. and Staszewski, W. Impact location and quantification on a composite panel using neural networks and a genetic algorithm. Strain, 36(2), 61-69.
26. Joshi, S. and Munir, N. (1996). Impact location, energy and damage detection in smart structures. Proceedings of the SPIE, Vol. 2718 (pp. 185-193).
27. Todoroki, A., Kobayashi, H. and Matuura, K. (1995). Application of electric potential method to smart composite structures for detecting delamination. JSME International Journal, 38(4), 524-530.
28. Zhao, J., Ivan, J. and Dewolf, T. (1998). Structural health monitoring using artificial neural networks. Journal of Infrastructure Systems, 4(3), 93-101.
29. Pandey, A. and Biswas, M. (1994). Damage detection in structures using changes in flexibility. Journal of Sound and Vibration, 169(1), 3-17.
30. Okafor, A., Chandrashekhara, K. and Jiang, Y. (1996). Delamination and prediction in composite beams with built-in piezoelectric devices using modal analysis and neural networks. Smart Materials and Structures, 338-347.
31. Scarponi, C. and Briotti, G. (1997). Ultrasonic techniques for evaluation of delaminations on composites materials. Journal of Reinforced Materials and Plastics, 16, 768-790.
32. Schulz, M., Pai, P. and Inman, D. (1999). Health monitoring and active control of composite structures using piezoceramic patches. Composites: Part B, 30, 713-725.
33. Salawu, O. (1997). Detection of structural damage through changes in frequency: a review. Engineering Structures, 19, 718-723.
34. Park, K., Reich, G. and Alvin, K. (1998). Structural damage detection using localized flexibilities. Journal of Intelligent Material Systems and Structures, 9(11), 911-919.
35. Egusa, S. and Iwasawa, N. (1998). Piezoelectric paints as one approach to smart structural materials with health monitoring capabilities. Smart Materials and Structures, 7, 438-445.
36. Schueler, R., Joshi, S. and Sculte, K. (2001). Damage detection in carbon fiber reinforced polymer (CFRP) by electrical conductivity mapping. Computer Science and Technology, 61, 921-930.
37. Wang, C. and Chang, F. (1999). Built-in diagnostics for impact damage identification of composite structures. In F.-K. Chang (Ed.), Proceedings of the 2nd International Workshop on Structural Health Monitoring (pp. 612-621).
38. Wang, C. and Chang, F. (2000). Diagnosis of impact damage in composite structures with built-in piezo-electrics network. In Proceedings of the SPIE Smart Structures and Materials Conference. Newport Beach, CA, 4-8 March.
39. Chang, F. (1995). Built-in damage diagnostics for composite structures. Proceedings of the Tenth International Conference on Composite Structures (ICCM-10), Vol. V. (pp. 283-289). Whistler, B.C., Canada, 14-18 August.
40. Grace, J., Poland, S., Murphy, A., Claus, R., Abraham, P. and Sridharan, K. (1996). Embedded fiber optic sensors for structural damage detection. Proceeding of the SPIE Smart Structures and Materials Conference, Vol. 2718 (pp. 196-201). San Diego, California.
41. Baumann, E., Becker, R., Ellerbrock, P. and Jacobs, S. (1997). DC-XA structural health monitoring system. Proceedings of the SPIE Smart Structures and Materials Conference, Vol. 3044 (pp. 195-206). San Diego, CA.
42. Keilers, C. and Chang, F. (1993). Damage detection and diagnostics of composites using built-in piezoceramics. Proceedings of the SPIE Smart Structures and Materials Conference, Vol. 1917 (pp. 1009-1019). San Diego, CA.
43. Tracy, M., Roh, Y. and Chang, F. (1996). Impact damage diagnostics for composites structures using built-in sensors and actuators. Proceedings of the 3rd ICIM/ECSSM, Vol. 2779 (pp. 118-123). Lyon, France.
44. Shen, B., Tracy, M., Roh, Y. and Chang, F. (1996). Built-in piezoelectrics for processing and health monitoring of composite structures. Proceedings of the AIAA/ASME/AHS Adaptive Structures Forum (pp. 390-397), Paper 96-1310. Salt Lake City, UT, 18-19 April.
45. Hickman, G. et al. (1990). Application of smart structures to aircraft health monitoring. J. of Intelligent Material Systems and Structures, 411-430.
46. Choi, K. and Chang, F. (1993). Identification of impact force and location using distributed sensors. J. of AIAA, 34, 136-142.
47. Carman, G. and Stewart, A. (2002). Structural health monitoring using thermal approaches. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4701-09. San Diego, CA.
48. Kessler, S. and Spearing, S. (2002). Design of a piezoelectric-based structural health monitoring system for damage detection in composite materials. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4701-11. San Diego, CA.
49. Pines, D., Salvino, L. and Purekar, A. (2002). Structural health monitoring using empirical mode decomposition and Hilbert-Huang transform on one-dimensional structures. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4701-15. San Diego, CA.
50. Dang, N. and Rao, V. (2002). Embedded systems for the assessment of structural damages. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4701-18. San Diego, CA.
51. B. Amizic, B., Rao, V., Amarvadi, V. and Derriso, M. (2002). Two-dimensional wavelet mapping techniques for damage detection. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4693-32. San Diego, CA.
52. Shi, L., Ihn, J. and Chang, F. (2002). Lamb wave detection based on adaptive wavelet modeling. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4693-34. San Diego, CA.
53. Ghoshal, A., Martin, W., Schulz, M., Chattopadhyay, A. and Prosser, W.H. (2002). Wave propagation sensing for damage detection in plates. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4693-36. San Diego, CA.
54. Speckmann, H. (2002). Structural health monitoring with smart sensors: approach to a new NDI technology. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4698-47. San Diego, CA.
55. Kiddy, J., Chen, P., Baldwin, C. and Poloso, T. (2002). Structural load monitoring of the R.V triton using fiberoptic sensors. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4698-50. San Diego, CA.
56. Boiler, C. (June 2001). Ways and options for aircraft structural health management. Smart Materials and Structures, 10(3), 432-440.
57. Giurgiutiu, V. (2002). Current issues in vibration based fault diagnostics and prognostics. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4702-15. San Diego, CA.
58. Light, G., Kwun, H., Kim, S. and Spinks, R. (2002). Magnetostrictive sensor for health monitoring in structures. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4702-33. San Diego, CA.
59. Zagrai, A. and Giurgiutiu, V. (2002). Health monitoring of aging aerospace structures using the electromechanical impedance method. Proceedings of the SPIE Smart Structures and Materials Conference, Paper No. 4702-34. San Diego, CA.
60. Ihn, J. and Chang, F. (2002). Smart patches for monitoring crack growth in aircraft structures. AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Paper No. AIAA 2002-1544. Denver, CO, 22-25 April.
61. Kessler S. and Spearing, S. (2002). In-situ sensor based damage detection of composite materials for structural health monitoring systems. AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Paper No. AIAA 2002-1545. Denver, CO, 22-25 April.
62. Purekar A. and Pines, D. (2002). A phased sensor/actuator array for detecting damage in 2-E structures. AIAA/ASME/ASCE/AHS/ASC Structures, structural Dynamics, and Materials Conference, Paper No. AIAA 2002-1547. Denver, CO, 22-25 April.