Modeling of macrosegregation caused by volumetric deformation in a coherent mushy zone

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36 A, Issue 2, 2005, Pages 433-442

  Nicolli, Lilia C ^a,b   Mo, Asbsørn ^a,b   M'Hamdi, Mohammed ^a  

^a SINTEF   (Norway)

^b UNIVERSITY OF OSLO   (Norway)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; DENSIFICATION; MATHEMATICAL MODELS; SEGREGATION (METALLOGRAPHY); SOLIDIFICATION; VISCOPLASTICITY;

MACROSEGREGATION; METALLIC ALLOYS; THERMALLY INDUCED DEFORMATION; VISCOPLASTIC DEFORMATION;

ALUMINUM ALLOYS;

EID: 15244342866     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0314-x     Document Type: Article

References (46)

1. M. M'Hamdi, A. Mo, and C.L. Martin: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2081-93.
2. C.J. Vreeman, M.J.M. Krane, and F.P. Incropera: Int. J. Heat Mass Transfer, 2000, vol. 43, pp. 677-86.
3. C.J. Vreeman and F.P. Incropera: Int. J. Heat Mass Transfer, 2000, vol. 43, pp. 687-704.
4. C.J. Vreeman, J.D. Schloz, and M.J.M. Krane: J. Heat Transfer-Trans. ASME, 2002, vol. 124 (5), pp. 947-53.
5. M. Wu, A. Ludwig, P.R. Sahm, and A. Buhrig-Polaczeck: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 261-68.
6. A. Olsson, R. West, and H. Fredriksson: Scand. J. Metall., 1986, vol. 15, pp. 104-12.
7. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.
8. Q.Z. Diao and H.L. Tsai: Metall. Trans. A, 1993, vol. 24A, pp. 963-73.
9. P.J. Prescott and F.P. Incropera: Metall. Trans. B, 1991, vol. 22B, pp. 529-39.
10. T. Jalanti: Ph.D. No. 2145, École Polytechnique Fédérale de Lausanne, 2000.
11. M.C. Schneider and C. Beckermann: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2373-88.
12. J.P. Gu and C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1357-66.
13. H. Yang, L. Zhao, X. Zhang, K. Deng, W. Li, and Y. Gan: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 1345-56.
14. E.E. Emley: Int. Met. Rev., 1976, June, review 206, pp. 75-115.
15. K. Buxmann: Metallurgy, 1977, vol. 31 (2), pp. 163-70.
16. H.J. Thevik, A. Mo, and T. Rusten: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 135-42.
17. K. Miyazawa and K. Schwerdtfeger: Arch. Eisenhüttenwes., 1981, vol. 52, pp. 415-22.
18. C. Beckermann: Int. Mater. Rev., 2002, vol. 47 (5), pp. 243-61.
19. B. Andersson and J.E. Tibballs: in Continuous Casting of Non-Ferrous Metals and Alloys, H.D. Merchant, D.E. Tyler, and E.H. Chia, eds., TMS-AIME, Warrendale, PA, 1989, pp. 177-85.
20. C. Gras, M. Meredith, K. Gatenby, and J.D. Hunt: Mater. Sci. Forum 2002, vols. 396-402, pp. 89-94.
21. S.A. Lockyer, M. Yun, J.D. Hunt, and D.V. Edmonds: Aluminium Alloys: Their Physical and Mechanical Properties, PTS 1-3 Materials Science Forum, Transtec Publications Ltd., Zurich-Uetikan, Switzerland, 1996, vol. 217, pp. 367-72.
22. A. Mo, M. M'Hamdi, and H.G. Fjær: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 199-206.
23. R.J.A. Janssen, G.C.J. Bart, M.C.M. Cornelissen, and J.M. Rabenberg: Appl. Scient. Res., 1994, vol. 52, pp. 21-35.
24. T. Kajitani, J.-M. Drezet, and M. Rappaz: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1479-91.
25. G. Lesoult, C.-A. Gandin, and N.T. Niane: Acta Mater., 2003, vol. 51, pp. 5263-83.
26. H.F. Shen and C. Beckermann: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 69-78.
27. J.-M. Drezet, O. Ludwig, M. M'Hamdi, H.-G. Fjær, and C.L. Martin: in Light Metals 2004, A.T. Tabereaux, ed., TMS, Warrendale, PA, 2004, pp. 665-60.
28. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349-61.
29. I. Farup and A. Mo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1461-72.
30. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 215-35.
31. C.L. Martin, D. Favier, and M. Suéry: Int. J. Plasticity, 1997, vol. 13 (3), pp. 237-59.
32. C.L. Martin, M. Braccini, and M. Suéry: Mater. Sci. Eng., 2002, vol. A325, pp. 292-301.
33. O. Ludwig, C.L. Martin, and M. Suéry: Aluminium, 2002, vol. 78, pp. 830-34.
34. H. Combeau, J.-M. Drezet, A. Mo, and M. Rappaz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2314-27.
35. R. de Boer and W. Ehlers: Acta Mech., 1990, vol. 83, pp. 77-92.
36. C.L. Martin, O. Ludwig, and M. Suéry: Proc. WCCM V, Vienna, Austria, 2002, F.G. Rammerstorfer, H.A. Mang and J. Eberhardsteiner, eds., University of Technology, Vienna, Austria.
37. O. Ludwig, B. Commet, J.-M. Drezet, C.L. Martin, and M. Suéry: in Modeling of Casting, Welding and Advanced Solidification Processes X, D.M. Stefanescu, J. Warren, M. Jolly, and M. Krane, eds., TMS, Warrendale, PA, 2003, pp. 183-90.
38. H.G. Fjær and A. Mo. Alspen: Metall. Trans. B, 1993, vol. 14B, pp. 193-218.
39. B. Magnin, L. Katgerman, and B. Hannart: in Modelling of Casting, Welding and Advanced Solidification Processes - VI, M. Cross and J. Campbell, eds., TMS, Warrendale, PA, 1995, pp. 303-10.
40. A. Mo and H.J. Thevik: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2189-94.
41. H.G. Fjær, E.J. Holm, H. Sund, and M. M'Hamdi: Aluminium, 2002, vol. 78, pp. 843-47.
42. G. Amiez and P.-A. Gremaud: Numerishe Mathematik, 1991, vol. 59, pp. 71-89.
43. N. Ahmad, H. Combeau, J.L. Desbiolles, T. Jalanti, G. Lesoult, J. Rappaz, M. Rappaz, and C. Stomp: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 617-30.
44. N. Brookes and J.R. Hughes: Computer Methods in Applied Mechanics and Engineering, 1982, vol. 32, pp. 199-259.
45. D.S. Kershaw: J. Computat. Phys., 1978, vol. 26, pp. 43-65.
46. H.G. Fjær and A. Mo: ALSPEN-A Mathematical Model for Thermal Stresses in Direct Chill Casting of Aluminium Billets. Metall. Mater. Trans. B. 1993, vol. 14B, pp. 193-218.