Effect of fly ash and slag on the fracture characteristics of high performance concrete

Materials and Structures/Materiaux et Constructions

Volumn 38, Issue 275, 2005, Pages 63-72

  Bharatkumar, B H ^a   Raghuprasad, B K ^b   Ramachandramurthy, D S ^a   Narayanan, R ^a   Gopalakrishnan, S ^a  

^a CSIR STRUCTURAL ENGINEERING RESEARCH CENTRE   (India)

^b INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

BEAMS AND GIRDERS; BENDING STRENGTH; CEMENTS; COST EFFECTIVENESS; ELASTIC MODULI; FLY ASH; FRACTURE MECHANICS; HYDRATION; POROSITY; POZZOLAN; SIZE DETERMINATION; SLAGS; TENSILE STRENGTH;

CEMENT REPLACEMENT MATERIALS (CRM); HIGH PERFORMANCE CONCRETE (HPC); PORE STRUCTURE; QUASI-BRITTLE MATERIALS; UNIVERSAL TESTING MACHINES (UTM);

CONCRETES;

EID: 14944351115     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/14107     Document Type: Article

References (33)

1. Hover, K.C., 'Concrete mixture proportioning with water reducing admixtures to enhance durability: a quantitative model', Cement and Concrete Composites 20 (1998) 113-119.
2. CEB/fib, 'CEB-FIP Model Code', Comité Euro-International du Béton, Thomas Telsford, London, 1994.
3. Mehta, P.K., 'Role of pozzolanic and cementitious materials in sustainable development of the concrete industry', ACI SP-178 (1998) 1-20.
4. Krishnamoorthy, T.S., Gopalakrishnan, S., Balasubramanian, K., Bharatkumar, B.H. and Rama Mohan Rao, P., 'Investigations on the cementitious grout containing supplementary cementitious materials', Int. Journal of Cement and Concrete Research 32 (9) (September 2002) 1395-1405
5. Swamy, R.N., 'Design for durability and strength through the use of fly ash and slag in concrete', ACI SP-171 (1997) 1-72.
6. Mehta, P.K., 'Concrete technology at the cross-roads-problems and opportunities', ACI SP-144 (1994) 1-30.
7. Bharatkumar, B.H., Narayanan, R., Raghu Prasad, B.K. and Ramachandramurthy, D.S., 'Mix Proportioning of High Performance Concrete', Journal of Cement and Concrete Composites 23 (2001) 71-80
8. Giaccio, G., Rocco, C. and Zerbino, R., 'The fracture energy of high strength concrete', Mater. Struct. 26 (1993) 381-386.
9. Zhou, F.P., Barr, B.I.G. and Lydon, F.D., 'Fracture properties of high strength concrete with varying silica fume content and aggregates', Cement and Concrete Research 25 (3) (1995) 543-552
10. Gopalakrishnan, S., Balasubramanian, K., Krishnamoorthy, T.S. and Bhratkumar, B.H., 'Investigations on Reinforced High Performance Concrete Beams', Proc. of Seventh CANMET/ACI Conference, Madras, India, SP-199 (July 2001) 645-663
11. Gettu, R., Bažant, Z.P. and Martha, E.K., 'Fracture properties and brittleness of high strength concrete', ACI Material Journal 87 (6) (Nov.-Dec. 1990) 608-618.
12. th Engineering Mechanics Int. Conference (ASCE), Texas, Austin (May 2000) 21-24.
13. Rao, G.A. and Raghu Prasad, B.K., 'Fracture energy and softening behaviour of high strength concrete', Cement and Concrete Research 32 (2002) 247-252.
14. RILEM Committee FMT 89, 'Size-effect method for determining fracture energy and process zone size of concrete', Mater. Struct. 23 (1990) 461-465.
15. ASTM C-1202, 'Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration', Annual book of ASTM Standards, 4.02 Concrete and Aggregates (1990) 624-629.
16. Shah, S.P., Swartz, S.E. and Ouyang, C., 'Fracture Mechanics of Concrete' (John Wiley and Sons, New York, 1995).
17. RILEM Committee FMC 50, 'Determination of the fracture energy of mortar and concrete by means of the three-point bend tests on notched beams', Mater. Struct. 18 (1985) 285-290.
18. Bažant, Z.P., 'Size-effect in blunt fracture: concrete, rock, metal', ASCE Jou. of Engineering Mechanics 110 (1984) 518-535.
19. Bažant, Z.P., 'Fracture energy of heterogeneous materials and similitude', in 'Fracture of Concrete and Rock', Eds. Shah, S.P. and Swartz, S.E. (Springer-Verlag, New York, 1987) 229-241.
20. Bažant, Z.P. and Kazemi, M.T., 'Determination of fracture energy, process zone length and brittleness number from size-effect with application to rock and concrete', Int. Jou. of Fracture 44 (1990) 111-131.
21. Tang, T., Bažant, Z.P., Yang, S. and Zollinger, D.G., 'Variable-notch one-size test method for fracture energy and process zone length', Engineering Fracture Mechanics 55 (3) (1996) 383-404.
22. Bolomy, J., 'Durcissement des Mortiers et bétons', Tech. Suisse Romande (16, 22 & 24) (1927).
23. Smith, I.A, 'The Design of Fly ash Concretes', Proc. of the Institution of Civil Engineers, London 36 (1967) 769-790.
24. Bharatkumar, B.H., 'Fracture Characteristics of High Performance Concrete (Plain and Reinforced)', Ph.D. Thesis, Indian Institute of Science, Bangalore, India, 2003.
25. Aïtcin, P.C., 'High-Performance Concrete' (E&FN SPON, New York, 1998).
26. Malhotra, V.M., 'Making concrete 'greener' with fly ash', Concrete International (May 1999) 61-66.
27. Taylor, P.C. and Tait, R.B., 'Effect of fly ash on fatigue and fracture properties of hardened cement mortar', Cement and Concrete Composites 21 (3) (1999) 223-232.
28. Karihaloo, B.L., 'Fracture Mechanics and Structural Concrete' (Longman Scientific and Technical, UK, 1995).
29. F of concrete', Mater. Struct. 18 (107) (1985) 407-412.
30. Tang, T., Yang, S. and Zollanger, D.G., 'Determination of fracture energy and process zone length using variable-notch one-size specimens', ACI Material J. 96 (1) (1999) 3-10.
31. Bažant, Z.P, and Giraudon, E.B., 'Statistical prediction of fracture parameters of concrete and implications for choice of testing standard', Cement and Concrete Research 32 (2002) 529-556.
32. Bažant, Z.P., Qiang Yu and Goangseup Zi, 'Choice of standard fracture test for concrete and its statistical evaluation', International Journal of Fracture 118 (2002) 303-337.
33. Planas, J., Elices, M. and Guinea, G.V., 'Measurement of the fracture energy using three-point bend tests: Part-2 Influence of bulk energy dissipation', Mater. Struct. 25 (1992) 305-312.