A comparative study on the surface integrity of plastic mold steel due to electric discharge machining

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 36, Issue 1, 2005, Pages 117-124

  Ekmekci, Bülent ^a   Elkoca, Oktay ^b   Erden, Abdulkadir ^c  

^a Zonguldak Karaelmas University   (Turkey)

^b Eregli Iron and Steel Works Co   (Turkey)

^c ATILIM UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; CARBON; DIELECTRIC LIQUIDS; ELECTRODES; MARTENSITE; MICROCRACKS; PLASTIC MOLDS; RAPID SOLIDIFICATION; STEEL; SURFACE PHENOMENA;

DENDRITIC STRUCTURE; PLASTIC MOLD STEEL; RADIAL CRACKS; SURFACE INTEGRITY;

ELECTRIC DISCHARGE MACHINING;

EID: 14744271882     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-005-0011-6     Document Type: Article

References (42)

1. J.A. McGeough and H. Rasmussen: Int. J. Mach. Tool Design Res., 1982, vol. 22 (4), pp. 333-39.
2. J.R. Crookall and B.C. Khan: Proc. 15th Int. MTDR Conf., Birmingham, England, 1974, pp. 373-84.
3. N. Saito: Mitsubishi Denki Lab. Rep., 1962, pp. 375-90.
4. H.K. Lloyd and R.H. Warren: J. Iron Steel Inst., 1965, vol. 203, pp. 238-47.
5. J.E. Greene and J.L. Guerrero-Alvarez: Metall. Trans., 1974, vol. 5, pp. 695-706.
6. V. Radhakrishnan and B.T. Achyutha: IE(I) J.-ME, 1980, vol. 60, pp. 217-22.
7. Y.S. Wong, M. Rahman, H.S. Lim, H. Han, and N. Ravi: J. Mater. Process. Technol., 2003, vol. 140, pp. 303-07.
8. R. Ramaswami and R.S. Louis: Wear, 1973, vol. 24, pp. 153-60.
9. M.L. Jeswani: Wear, 1978, vol. 51, pp. 227-36.
10. P.V. Rama Rao and M.A. Faruqi: Precision Eng., 1982, vol. 4, pp. 111-13.
11. L.C. Lee, L.C. Lim, V. Narayanan, and V.C. Venkatesh: Int. J. Mach. Tools Manuf., 1988, vol. 28, pp. 359-72.
12. C. Cogun and M. Savsar: Int. J. Mach. Tools Manuf., 1990, vol. 30, pp. 467-74.
13. D.K. Aspinwall, M.L.H. Wise, K.J. Stout, T.H.A. Goh, F.L. Zhao, and M.F. Menshawy: Int. J. Mach. Tools Manuf., 1992, vol. 32, pp. 183-93.
14. J.C. Rebelo, A.M. Diaz, D. Kremer, and J.L. Lebrun: J. Mater. Process. Technol., 1998, vol. 84, pp. 90-96.
15. Y. Chen and S.M. Mahdivan: Wear, 1999, vol. 236, pp. 350-54.
16. Y. Chen and S.M. Mahdivan: J. Mater. Process. Technol., 2000, vol. 104, pp. 150-57.
17. K.M. Tsai and P.J. Wang: Int. J. Mach. Tools Manuf., 2001, vol. 41, pp. 1455-77.
18. M. Rozenek, J. Kozak, L. Dabrowski, and K. Lubkowski: J. Mater. Process. Technol., 2001, vol. 109, pp. 367-70.
19. S.H. Lee and X.P. Li: J. Mater. Process. Technol., 2001, vol. 115, pp. 344-58.
20. S.H. Halkaci and A. Erden: Proc. Engineering Systems Design and Analysis (ESDA), Istanbul, Turkey, 2002.
21. C.C. Liu and J.L. Huang: Ceram. Int., 2003, vol. 29, pp. 679-87.
22. H.T. Lee and T.Y. Tai: J. Mater. Process. Technol., 2003, vol. 142, pp. 676-83.
23. F. Ghanem, C. Braham, and H. Sidhom: J. Mater. Process. Technol., 2003, vol. 142, pp. 163-73.
24. J. Simao, H.G. Lee, D.K. Aspinwall, R.C. Dewes, and E.M. Aspinwall: Int. J. Machine Tools Manuf., 2003, vol. 43, pp. 121-28.
25. Y.H. Guu, H. Hocheng, C.Y. Chou, and C.S. Deng: Mater. Sci. Technol., 2003, vol. 358, pp. 37-43.
26. Y.F. Luo and C.G. Chen: Precision Eng., 1990, vol. 12, pp. 97-100.
27. N. Mohri, N. Saito, T. Takawashi, and K. Kobayashi: Proc. 26th Int. MTDR Conf., Manchester, England, 1985, pp. 329-36.
28. Y.F. Luo, Z.Y. Zhang, and C.Y. Yu: Ann. CIRP, 1988, vol. 37, pp. 179-81.
29. P.H. Thomson: Mater. Sci. Technol., 1989, vol. 5, pp. 1153-57.
30. S.H. Lee and X. Li: J. Mater. Process. Technol., 2003, vol. 139, pp. 315-21.
31. Report of AGIE: Am. Machinist Automated Manufacturing, 1987, vol. 9, pp. 80-83.
32. A.G. Mamalis, N.M. Vosniakos, N.M. Vacevanidis, and X. Junzhe: Ann. CIRP, 1988, vol. 37 (1), pp. 531-35.
33. H. Opitz: Met. Treat. Drop Forging, 1960, vol. 27, pp. 237-51.
34. M.M. Barash and M.G. Sri-Ram: Proc. 3rd Int. MTDR Conf., Birmingham, England, 1962, pp. 85-91.
35. M. Ramulu and J.L. Garbini: J. Eng. Mater. Technol., 1991, vol. 113, pp. 437-42.
36. L. Massarelli and M. Marchionni: Mater. Technol., 1977, vol. 4, pp. 100-05.
37. H.C. Tsai, B.H. Yan, and F.Y. Huang: Int. J. Mach. Tools Manuf., 2002, vol. 43, pp. 245-52.
38. J.P. Kruth, L. Stevens, L. Froyen, and B. Lauwers: Ann. CIRP, 1995, vol. 44, pp. 169-72.
39. E.D. Cabanillas, J. Desimoni, G. Punte, and R.C. Mercader: Mater. Sci. Eng., 2000, vol. A276, pp. 133-40.
40. L.C. Lim, L.C. Lee, Y.S. Wong, and H.H. Lu: Mater. Sci. Technol., 1991, vol. 7, pp. 239-48.
41. I.A. Bucklow and M. Cole: Metall. Rev., 1969, vol. 3, pp. 103-18.
42. J. Wallbank: Metallurgia, 1980, vol. 47, pp. 356-62.