Effects of shot-peening intensity on fretting fatigue crack-initiation behaviour of Ti-6Al-4V

Fatigue and Fracture of Engineering Materials and Structures

Volumn 28, Issue 3, 2005, Pages 321-332

  Sabelkin, V ^a   Martinez, S A ^b   Mall, Shankar ^a   Sathish, S ^b   Blodgett, M P ^b  

^a Air Force Institute of Technology   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

Fretting fatigue; MSSR parameter; Residual stress; Shot peening; Titanium alloy

Indexed keywords

CRACK INITIATION; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; RESIDUAL STRESSES; SHEAR STRESS; SHOT PEENING; STRESS RELAXATION; TENSILE STRESS; TITANIUM ALLOYS;

FRETTING FATIGUE; MODIFIED SHEAR STRESS RANGE (MSSR) PARAMETER; SHOT PEENING INTENSITY;

FATIGUE OF MATERIALS;

EID: 14544300084     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2005.00871.x     Document Type: Article

References (30)

1. Gabel, M. K. and Bethk, J. J. (1979) Coating for fretting prevention. Wear 46, 81-96.
2. Vardiman, R. G. and Greighton, D. (1982) Effect of ion implantation on fretting fatigue in Ti-6Al-4V alloy. American Society for Testing and Materials, STP 780. Philadelphia, pp. 138-149.
3. Tanaka, K., Mutoh, Y. and Sakoda, S. (1985) Effect of contact materials on fretting fatigue in a spring steel. Trans. Jpn. Soc. Mech. Engrs., Ser. A 51, 1200-1207.
4. Shiozawa, K. (1999) Effect of fatigue strength on anodized aluminum alloy. J. Jpn. Anodizing Assoc. 3, 3-10.
5. Hirata, M., Maejima, M., Saruwatari, K., Shigeno, H. and Takaya, M. (1996) Rotational bending fatigue of anodized coating of aluminum. Aluminum Surf. Technol. 47, 376-377.
6. Cree, A. M., Weidmann, G. V. and Hermann, R. (1995) Film-assisted fatigue crack propagation in anodized aluminum alloys. J. Mater. Sci. Lett. 4, 1505-1507.
7. Sumita, M., Maruyama, N. and Nakazawa, K. (1994) Fatigue and fretting fatigue behavior of SiC whisker-reinforced aluminium metal matrix composite. In: Fretting Fatigue, ESIS 18 (Edited by R. B. Waterhouse and T. C. Lindley), pp. 351-361.
8. Nishida, T., Mizutani, J., Mutoh, Y. and Maejima, M. (2003) Effect of lubricating anodic film on fretting fatigue strength of aluminum alloy. In: Fretting Fatigue: Advances in the Basic Understanding and Applications, STP 1425 (Edited by S. E. Kinyon, D. W. Hoeppner and Y. Mutoh), pp. 369-384.
9. Okane, M., Shiozawa, K., Hiki, M. and Suzuki, K. (2003) Fretting fatigue properties of WC-Co thermal sprayed NiCrMo steel. In: Fretting Fatigue: Advances in the Basic Understanding and Applications, STP 1425 (Edited by S. E. Kinyon, D. W. Hoeppner and Y. Mutoh), pp. 385-399.
10. Kubota, M., Tsutsui, K., Makino, T. and Hirakawa, K. (2000) The effect of the contact condition and surface treatments on the fretting fatigue strength of medium carbon steel. In: Fretting Fatigue: Current Technology and Practices, STP 1367 (Edited by D. W. Hoeppner, V. Chandrasekaran and B. E. Charles III), pp. 477-490.
11. Okane, M., Shiozawa, K. and Ishikura, T. (2000) Fretting fatigue behavior of TiN-coated steel. In: Fretting Fatigue: Current Technology and Practices, STP 1367 (Edited by D. W. Hoeppner, V. Chandrasekaran and B. E. Charles III), pp. 465-476.
12. Waterhouse, R. B. (1981) Avoidance of fretting fatigue failures. In: Fretting Fatigue. Applied Science Publishers, London, pp. 221-240.
13. Mutoh, Y., Kinyon, S. E. and Hoeppner, D. W. (eds.) (2003) Fretting Fatigue: Advances in Basic Understanding and Applications, STP 1425. ASTM International, West Conshohocken, PA.
14. Hoeppner, D. W., Chandrasekaran, V. and Elliott, C. B. III (eds.) (2000) Fretting Fatigue: Current Technology and Practices STP 1367. ASTM International, West Conshohocken, PA.
15. Waterhouse, R. B. and Lindley, T. C. (eds.) (1994) Fretting Fatigue ESIS Publication 18, Mechanical Engineering Publications Limited, London.
16. Leadbeater, G., Noble, B. and Waterhouse, R. B. (1984) The fatigue of an aluminum alloy produced by fretting on shot peened surfaces. In: Proceedings of the Sixth International Conference on Fracture, Vol. 3, 2125-2132.
17. Bignonnet, A. (1994) Some observations of the effect of shot peening on fretting fatigue. In: Fretting Fatigue (Edited by R. W. Waterhouse and T. C. Lindley), pp. 475-483.
18. Lee, H., Jin, O. and Mall, S. (2003) Fretting fatigue behavior of shot peened Ti-6Al-4V at room and elevated temperatures. Fatigue Fract. Engng Mater. Struct. 26, 1-12.
19. Mall, S., Jin, O., Yuskel, H. and Calcaterra, J. R. (2002) Investigation into fretting fatigue behavior of shot-peened Ti-6Al-4V. In: Proceedings of the Seventh National Turbine Engine High Cycle Fatigue Conference. West Palm Beach, FL. In CD.
20. Lee, H. and Mall, S. (2002) Fretting fatigue and stress relaxation behaviors of shot peened Ti-6Al-4V. In: Fatigue and Fracture Mechanics, ASTM 1461 (Edited by S. R. Daniewicz, J. C. Newman and K. H. Schwable). ASTM International, West Conshohocken, PA.
21. Martinez, S. A., Sathish, S., Blodgett, M. P. and Mall, S. (2003) Residual stress relaxation due to fretting fatigue in shot-peened surfaces of Ti-6Al-4V. Rev. Quant. Nondestruct. Eval., Am. Inst. Phys. 22, 1531-1537.
22. Martinez, S. A., Sathish, S., Blodgett, M. P. and Shepard, M.J. (2003) Residual stress distribution on surface treated Ti-6Al-4V by X-ray diffraction. Exp. Mech. 43, 1-7.
23. Namjoshi, S. A., Jain, V. K. and Mall, S. (2002) Effects of shot peening on fretting fatigue behavior of Ti-6Al-4V. J. Engng Mater. Technol. 124, 1-7.
24. Vohringer, O. (1987) Changes in the state of the material by Shot-peening. In: Proceedings of the Third International Conference on Shot-Peening, Shot-Peening: Science, Technology, Applications, InformationsGesselschaft, pp. 221-230.
25. Lykins, C. D., Mall, S. and Jain, V. (2001) A shear stress based parameter for fretting fatigue crack initiation. Fatigue Fract. Engng Mater. Struct. 24, 461-473.
26. ABAQUS v.6.3. (2002) Theory Manual. Pawtucket, RI (USA): Hibbitt, Karlsson & Sorensen, Inc.
27. Namjoshi, S. A., Mall, S., Jain, V. K. and Jin, O. (2002) Fretting fatigue crack initiation mechanism in Ti-6Al-4V. Fatigue Fract. Engng Mater. Struct. 25,955-964.
28. Walker, K. (1970) The effective stress ratio during crack propagation and fatigue for 2024-T3 and 7075-T6 aluminum. Effects on environment and complex load history on fatigue life. American Society for Testing and Materials, STP 462, Philadelphia, PA, pp. 1-14.
29. Lykins, C. D., Mall, S. and Jain, V. K. (2001) Combined experimental-numerical investigation of fretting fatigue crack initiation. Int. J. Fatigue 23,703-711.
30. Shkarayev, S. and Mall, S. (2003) Computational modeling of shot-peening effects on crack propagation under fretting fatigue. Strain Anal. Engng Des. 38, 495-506.