Modelling of thermomechanical rolling

Niobium, Science and Technology

Volumn , Issue , 2001, Pages 501-526

  Palmiere, E J ^a   Sellars, C M ^a   Subramanian, S V ^b  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

^b MCMASTER UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BOUNDARY CONDITIONS; DEFORMATION; FINITE ELEMENT METHOD; GRAIN SIZE AND SHAPE; MATHEMATICAL MODELS; MECHANICAL ALLOYING; METALLOGRAPHIC MICROSTRUCTURE; OPTIMIZATION; RECRYSTALLIZATION (METALLURGY); ROLLING; SOLIDIFICATION; STEEL HEAT TREATMENT; STRAIN RATE; STRESS ANALYSIS; THERMAL EFFECTS; THERMOMECHANICAL TREATMENT;

MICROALLOYING; THERMOMECHANICAL ROLLING;

NIOBIUM METALLURGY;

EID: 1442360478     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Conference Paper

References (64)

1. A.J. DeArdo, J.M. Gray and L. Meyer, Niobium 81 (San Francisco), Ed. H. Stuart, (Warrendale, PA: TMS-AIME, 1984), 685.
2. C.M. Sellars and J.A. Whiteman, Controlled Processing of High Strength Low Alloy Steels (York), (Sheffield, UK: British Steel Corporation, 1976).
3. C.M. Sellars, Hot Working and Forming Processes (Sheffield), eds. C.M. Sellars and G.J. Davies, (London, UK: The Metals Society, 1980), 3.
4. J.H. Beynon and C.M. Sellars, Modelling of Plastic Deformation and its Engineering Applications, eds. S.I. Andersen et.al., (Denmark: RISθ National Laboratory, 1992), 13.
5. Y.H. Li et.al., Acta Metallurgica Sinica (English Letters), 13 (2000), 359.
6. J. Andorfer et.al., Thermec 97 (Wollongong), eds. T. Chandra and T. Saki, (Warrendale, PA: TMS-AIME, 1997), 2069.
7. D.C.Houghton, G.C.Weatherly and J.D.Embury, Advances in the Physical Metallurgy and Applications of Steels, (New York, NY: TMS-AIME, 1982), 267.
8. M.Hillert and L.I.Staffansson, Acta Chemica Scandinavica, 24 (1970), 3618.
9. K.J.Irving, F.B.Pickering and T.Gladman, J. Iron and Steel Inst., 205 (1976), 161.
10. H.Ohtani et al., Japan-Canada Seminar on Secondary Steelmaking, 3-4 December, 1985, J7.
11. S.Koyama, T.Ishii and K.Narita, Nippon Kink, Gakk, Vol. 35 (1971), 1089.
12. M.G.Akben, I.Weiss and J. J. Jonas, Acta Metall., 29 (1981), 111.
13. K.Balasubramanian and J.S.Kirkaldy, CALPHAD, 10 (1986), 187.
14. J.M.Gray, S.V.Subramanian and D.A.R. Kay, Technology and Applications of HSLA Steels (Philadelphia), (Metals Park: ASM, 1983), 967.
15. nd Nishiyama Memorial Seminar, Prediction of Control Technology of the Mechanical Properties of Steel: Present and Future Status, (Tokyo: ISIJ, 1990), 17.
16. S.Akamatsu et al., ISIJ International, 24 (1994), 9.
17. K.Inoue et al., ISIJ International, 41 (2001), 175.
18. E.Rudy, J. of the Less-Common Metals, 33 (1970), 43.
19. M.Grujicic, I.Wang and W.S.Owen, CALPHAD, 10 (1986), 117.
20. H.Zou and J.S.Kirkaldy, Metall. Trans., 23 (1992), 651.
21. M.Prikryl et al., Metall. Trans., 27 (1996), 1149.
22. H.G.Suzuki, S.Nishimura and S.Yamaguchi, Trans. Iron Steel Inst. Japan, 22 (1982), 48.
23. C.Ouchi and K.Matsumoto, Trans. Iron Steel Inst. Japan, 22 (1982), 181.
24. Y.Maechara and Y.Ohmori, Mat. Sci. Eng., 62 (1984), 109.
25. S.V.Subramanian et al., Technology and Applications of HSLA Steels (Beijing), (Materials Park: ASM International, 1985), 151.
26. T.Taira et al., Technology and Applications of HSLA Steels (Philadelphia), (Metals Park: ASM, 1983), 723.
27. S.V.Subramanian et al. Microalloyed Bar and Forging Steels (Hamilton), ed. M. Finn, (Montreal: CIM, 1990), 120.
28. B.Dutta, and C.M.Sellars, Mat. Sci. Tech., 3 (1987), 197.
29. S.V.Subramanian and G.C.Weatherly, Thermec 97 (Wollongong), eds. T. Chandra and T. Saki, (Warrendale, PA: TMS-AIME, 1997), 827.
30. S.V.Subramanian and H. Zou, Processing, Microstructure and Properties of Microalloyed and Other Modern High Strength Low Alloy Steels (Pittsburgh), (Warrendale: ISS-AIME, 1991), p. 23.
31. D.R.Poirier et al., J. Iron and Steel Inst., 199 (1970), 371.
32. D.H. Geiger and D.R. Poirier, Transport Phenomena in Metallurgy, (Reading, MA: Addison-Wesley Publishing Co., 1973), 497.
33. S.S. Hansen, J.B. Vander Sande, and M. Cohen, Metall. Trans., 11 (1980), 387.
34. W.J. Liu and J.J. Jonas, Metall. Trans., 20 (1989), 689.
35. B. Dutta, E. Valdes and C.M. Sellars, Acta Metall. Mater., 40 (1992), 653.
36. E.J. Palmiere, C.I. Garcia, and A.J. DeArdo, Metall. Trans., 27 (1996), 951.
37. B. Dutta and E.J. Palmiere, Metall. Mater. Trans., In press, 2001.
38. E.J. Palmiere, C.I. Garcia and A.J. DeArdo, Metall. Mater. Trans., 25 (994), 277.
39. W.J. Liu, Metall. Mater. Trans., 26 (1995), 1641.
40. B. Dutta, E.J. Palmiere and C.M. Sellars, Acta Mater., 49 (2001), 785.
41. C.S. Janampa, Ph.D. thesis, The University of Sheffield, 1982.
42. C.M. Sellars, Mat. Sci. Tech., 6 (1990), 1072.
43. K.C. Russell, Adv. Coll. Int. Sci., 13 (1980), 205.
44. R. Wagner, R., and R. Kampmann, R. in: Mater. Sci. Tech. A Comprehensive Treatment, eds. R.W. Cahn, P. Hassen and E.J. Krammer, Vol. 5, (VCH Verlagsgesselschaft GmbH, Weinheim, Germany, 1991), 213.
45. K.C. Russell, in: Phase Transformations, eds. H.I. Aaronson, (Metals Park: ASM, 1970), 219.
46. M.P. Black et.al., Acta Mater., In press, 2001.
47. S. Kurokawa, J.E. Ruzzante, A.M. Hey, and F. Dyment, Metals Sci., 17 (1983), 433.
48. J.W. Cahn, Acta Metall., 5 (1957), 169.
49. R. Gomez-Ramirez, and G.M. Pound, Metall. Trans., 4 (1973), 1563.
50. I.M. Lifshitz, and V.V. Slyozov, J. Phys. Chem. Solids, 19 (1961), 35.
51. C. Wagner, Z. Electrochem., 65 (1961), 581.
52. G.A. Murch, in: Mater. Sci. Tech. A Comprehensive Treatment, eds. R.W. Cahn, P. Hassen and E.J. Krammer, Vol. 5, (VCH Verlagsgesselschaft GmbH, Weinheim, Germany, 1991), 90.
53. D.R. DiMicco and A.T. Davenport, Thermomechanical Processing of Microalloyed Austenite (Pittsburgh) eds. A.J. DeArdo, G.A. Ratz and P.J. Wray, (Warrendale: TMS-AIME, 1982), 59.
54. E. Valdes and C.M. Sellars, Mat. Sci. and Tech., 7 (1991), 622.
55. E.S. Siradj, C.M. Sellars and J.A. Whiteman, Mat. Sci. Forum. 284-286 (1998), 143.
56. M. Militzer and D. Meade, Thermomechanical Processing of Steel (Ottawa), eds. S. Yue and E. Essadiqi, (Montreal: CIM, 2000), 453.
57. B. Dutta and C.M. Sellars, Thermec 88 (Tokyo), Ed. I. Tamura, (Tokyo: ISIJ, 1988), 261.
58. J.J. Jonas, Thermec 97 (Wollongong), eds. T. Chandra and T. Saki, (Warrendale, PA: TMS-AIME, 1997), 31.
59. C.M. Sellars, Thermomechanical Processing of Steel (Ottawa), eds. S. Yue and E. Essadiqi, (Montreal: CIM, 2000), 3.
60. L.N. Pussegoda, S. Yue and J.J. Jonas, Metall. Trans., 21 (1990), 153.
61. C. Roucoules, S. Yue and J.J. Jonas, Modelling of Hot Rolling Processes (London), (London: The Institute of Materials, 1993), 165.
62. S.V. Subramanian et. al., Low Carbon Steels for the 90's (Pittsburgh), eds. R. Asfahani and G. Tither, (Warrendale: TMS-AIME, 1993), 313.
63. L.E. Collins et.al., Microalloying 95 (Pittsburgh), ed. M. Korchynsky, (Warrendale: ISS-AIME, 1995), 141.
64. D.A. Linkens, J.H. Beynon and C.M. Sellars, Australia Pacific Forum on Intelligent Processing and Manufacturing of Materials, eds. T. Chandra et.al., Vol. 2, (Australia Pacific Forum, 1997), 676.