Finish-turning of hardened powder metallurgy steel using cryogenic cooling

International Journal of Powder Metallurgy (Princeton, New Jersey)

Volumn 40, Issue 1, 2004, Pages 19-31

  Zurecki, Zbigniew ^a   Ghosh, Ranajit ^a   Frey, John H ^a  

^a AIR PRODUCTS AND CHEMICALS INC   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; CERAMIC CUTTING TOOLS; CERMETS; COOLING; CRYOGENICS; CUBIC BORON NITRIDE; GRINDING (MACHINING); INFILTRATION; LUBRICATION; MATHEMATICAL MODELS; MICROSTRUCTURE; POROSITY; THERMAL CONDUCTIVITY;

STRUCTURAL COMPONENTS; SURFACE GRINDING;

STEEL POWDER METALLURGY;

EID: 1442311569     PISSN: 08887462     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (31)

1. E.J.A. Armarego, G. Shi, and S. Verezub, "Modeling the Basic Cutting Action and Machining Performance of Sintered Metallic Materials", Machining Sci. and Technology, 2001, vol. 5, no. 3, pp. 353-373.
2. A.C. Goodrich, "Evaluating Technology Strategies for the Manufacturing of Near-Net-Shape Metal Automotive Components", P/M Science and Technology Briefs, 2002, vol. 4, no. 3, pp. 5-10.
3. W. Konig, A. Berktold, and K.-F. Koch, 'Turning versus Grinding - A Comparison of Surface Integrity Aspects and Attainable Accuracies", Annals of the CIRS, 1993, vol. 42/1, pp. 39-43.
4. A. Berktold, J. Liermann, and N. Winands,"Top-Quality Components Not Only By Grinding", 1994, IDR 3/94, pp. 127-132.
5. H.K. Tonshoff, D. Brandt, and H.-G. Wobker, "Potential and Limitation of Hard Turning", 1st Int. Machining and Grinding Conf., 1995, September 12-14, Dearborn, Michigan, SME Technical Paper MR95-215.
6. D. Graham, "Effective Turning of Powder Metal Parts", Metlfax, 1999, August, vol. 43, no. 11, pp. 50-52.
7. C.A. Rocha, W.F. Sales, and C.S. de Barcellos, "Machining of Engine Valve Seats with PCBN Tooling", Industrial Diamond Review, 2002, vol. 62, no. 594, pp. 203-208.
8. ASM Desk Editions, Metals Handbook, Secondary Operations, Powder Metallurgy, Machining, ASM Intl., 2001, CD version, http://www.asm-intl.org/.
9. R.J. Causton, "Machinability of P/M Steels", Proc. of the 1995 International Conf. on Powder Metallurgy and Particulate Materials, Seattle, Washington, USA, 1995, http://www.hoeganaes.com/Publica/.
10. D. Mazilu and F.G. Ciolacu, "Study of Chip Formation to the Turning and Drilling Powder Metallurgy Materials", Proc. of the 2nd International Conf. on Materials and Manufacturing Technologies, MATEHN'98, Cluj-Napoca, Romania, 1998, pp. 909-994.
11. R. Ghosh, Z. Zurecki, and J.H. Frey, "Cryogenic Machining with Brittle Tools and Effects on Tool Life", paper no. IMECE2003-42232, to be published at the 2003 ASME Int. Mechanical Engineering Congress & Expo., Washington D.C., 2003, November 16-21.
12. Y.K. Chou and C.J. Evans, "Cubic Boron Nitride Tool Wear in Interrupted Hard Turning", Wear, 1999, vol. 225-229, pp. 234-245.
13. Z. Zurecki and G. Harriott, "Industrial Systems for Cost Effective Machining of Metals Using an Environmentally Friendly Liquid Nitrogen Coolant", Proc. of the Aerospace Manufacturing Technology Conf., SAE, Long Beach, CA, 1998, June 2-4.
14. Z. Zurecki, G. Harriott, and X. Zhang, "Dry Machining of Metals with Liquid Nitrogen", Proc. of the 3rd International Machining and Grinding '99 Conf. and Expo, SME, Cincinnati, OH, 1999, October 4-7.
15. Y.-W. Park, "The Quantification of the Depth of Deformed Layer Using Elemental Analysis for Aspheric Lens Mold Core", Session 235, Proc. of the 3rd Int. Machining and Grinding Conf., 1999, October 4-7, Cincinnati, Ohio, pp. 243-251.
16. Z. Zurecki, R. Ghosh, and J.H. Frey, "Investigation of White Layers Formed in Conventional and Cryogenic Hardturning of Steels", ICEME2003-42313, to be published at the 2003 ASME Int. Mechanical Engineering Congress & Expo., Washington D.C., 2003, November 16-21.
17. A. Barbacki, M. Kawalec, and A. Hamrol, "Turning and Grinding as a Source of Microstructural Changes in the Surface Layer of Hardened Steel", J. of Materials Processing Technology, 2003, vol. 133, pp. 21-25.
18. "Rolling Contact Fatigue (RCT) Test Program, Final Report", The Center for Powder Metallurgy Technology (CPMT), released by H. Sanderow, Princeton, NJ, 2001, September.
19. H. Rutz, T. Murphy, and T. Cimino, "The Effect of Microstructure on Fatigue Properties of High Density Ferrous P/M Materials", Proc. of PM-EC'96 World Congress, 1996, June 16-21, Washington, D.C.
20. H. Rutz, F. Hanejko, and T. Miller, "The Application of Warm Compaction to High Density Powder Metallurgy Parts", Proc. of the PM2TEC'97 International Conf. on Powder Metallurgy & Particulate Materials, 1997, June 29-July 2, Chicago, IL USA.
21. R. Shivanath, R. Peters, P.K. Jones, and I. El-Sawaf, "Vacuum Carburization of HighPerformance Automotive PM Parts", Industrial Heating, 2001, http://www.industrialheating.com/ih/cda/articleinformation/coverstory/ bnpcoverstoryitem/0,25932,00+en-uss_0ldbc.html, posted on: 05/08/2001.
22. D.H. Herring, "Heat Treating P/M Parts", Heat Treating Progress, ASM, 2002, June, pp. 1-4.
23. M.L.Penalva, M. Arizmendi, F. Diaz, and J. Fernandez, "Effect of Tool Wear on Roughness In Hard Turning", Annals of the CIRP, 2002, vol. 51/1/2002, pp. 57-60.
24. H.M. Pollicove and D.T. Moore, "Surface Microroughness of Optical Glasses under Deterministic Microgrinding", LLE Review, TheUniversity of Rochester, Rochester, NY, 1996, January-March, vol. 66, pp. 86-102, http://www.lle.rochester.edu/pub/review/v66/v66-surface.pdf.
25. G.T. Smith and M.J. Allsop, "Some Aspects in the Surface Integrity Associated with Turning of Powder Metallurgy Compacts", Wear, 1991, 151, pp. 289-302.
26. X.L. Liu, D.H. Wen, Z.J. Li, L. Xiao, and F.G. Yan, "Experimental Study on Hard Turning Hardened GCrlS Steel with PCBN Tool", J. of Materials Processing Technology, Elsevier, 2002, vol. 129, pp. 217-221.
27. T. Wada, M. Sakurai, and A. Ogura, "Tool Wear in Cutting of Sintered Iron Material", J. of the Japan Society of Powder and Powder Metallurgy, 2002, vol. 48, no.5, pp. 386-391.
28. T. Wada and T. Toihara, "Cutting Performance of CBN Tools in Cutting of Sintered Steel", J. of the Japan Society of Powder and Powder Metallurgy, 2002, vol. 49, no. 9, pp. 773-779.
29. C. Blais and G. L'Esperance, "Turning and Drilling of Parts Made from Sinter Hardenable Steel Powders", Powder Metallurgy, 2002, vol. 45, no. 1, pp. 39-47.
30. Y.K. Chou and C.J. Evans, "Finish Hard Turning of Powder Metallurgy M50 Steel", Trans. Of NAMRI/SME. 1997, vol. XXV, pp. 81-86.
31. D. Mazilu, G. Tirpe, and D. Dobre, "Considerations Regarding Energetic Aspect at Machinability of Powder Metallurgy Materials", Proc. of the 2nd International Conf. on Materials and Manufacturing Technologies, MATEHN'98, 1998, Cluj-Napoca, Romania, pp. 983-988.