Essential and plastic works of ductile fracture in asphalt binders

Transportation Research Record

Volumn , Issue 1875, 2004, Pages 1-8

  Andriescu, Adrian ^a   Hesp, Simon A M ^a   Youtcheff, John S ^b  

^a QUEEN S UNIVERSITY   (Canada)

^b Federal Highway Administration Virginia Division   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ASPHALT; CRACK INITIATION; DUCTILE FRACTURE; FAILURE (MECHANICAL); FATIGUE OF MATERIALS; HIGHWAY SYSTEMS; LOAD TESTING; PAVEMENTS; PLASTICS; RHEOLOGY; STRAIN;

STRAIN-CONTROLLED MODES; STRATEGIC HIGHWAY RESEARCH PROGRAM (SHRP); STRESS STATES; THIN PAVEMENTS;

BINDERS;

EID: 14344255639     PISSN: 03611981     EISSN: None     Source Type: Journal    
DOI: 10.3141/1875-01     Document Type: Conference Paper

References (48)

1. Deme, I. J., and F. D. Young. Ste. Anne Test Road Revisited Twenty Years Later. Proceedings, Canadian Technical Asphalt Association, Vol.32, 1987, pp. 254-283.
2. Anderson, D. A., and T. W. Kennedy. Development of SHRP Binder Specification. Journal of the Association of Asphalt Paving Technologists, Vol.62,1993, pp. 481-507.
3. Finn, F. N., M. T. Yapp, J. S. Coplantz, and A. Z. Durrani. Asphalt Properties and Relationship to Pavement Performance: Literature Review. Report SHRP-A/IR-90-015, National Research Council, Washington, D.C., 1990.
4. Anderson, D. A., and T. W. Kennedy. Development of SHRP Binder Specification. Journal of the Association of Asphalt Paving Technologists, Vol.62,1993, pp. 481-507.
5. Deacon, J. A., J. T. Harvey, A. Tayebali, and C. L. Monismith. Influence of Binder Loss Modulus on the Fatigue Performance of Asphalt Concrete Pavements. Journal of the Association of Asphalt Paving Technologists, Vol. 66, 1997, pp. 533-585.
6. Romero, P., K. D. Stuart, and W. Mogawer. Fatigue Response of Asphalt Mixtures Tested by the Federal Highway Administration's Accelerated Loading Facility. Journal of the Association of Asphalt Paving Technologists, Vol. 69, 2000, pp. 212-235.
7. Stuart, K. D., and W. S. Mogawer. Validation of the Superpave Asphalt Binder Fatigue Cracking Parameter Using the FHWA's Accelerated Loading Facility. Journal of the Association of Asphalt Paving Technologists, Vol. 71, 2002, pp. 116-146.
8. Reese, R. Properties of Aged Asphalt Binder Related to Asphalt Concrete Fatigue Life. Journal of the Association of Asphalt Paving Technologists, Vol. 66, 1997, pp. 604-632.
9. Lee, N., and S. A. M. Hesp. Low-Temperature Fracture Toughness of Polyethylene-Modified Asphalt Binders. In Transportation Research Record 1436, TRB, National Research Council, Washington, D.C., 1994, pp. 54-59.
10. Hoare, T. R., and S. A. M. Hesp. Low-Temperature Fracture Testing of Asphalt Binders. In Transportation Research Record: Journal of the Transportation Research Board, No. 1728, TRB, National Research Council, Washington, D.C., 2000, pp. 36-42.
11. Roy, S. D.,and S. A. M. Hesp. Fracture Energy and Critical Crack Tip Opening Displacement. Proceedings, Canadian Technical Asphalt Association, Vol. 46, 2001, pp. 187-214.
12. Anderson, D. A., L. Champion-Lapalu, M. O. Marasteanu, Y. M. LeHir, J.-P. Planche, and D. Martin. Low-Temperature Thermal Cracking of Asphalt Binders as Ranked by Strength and Fracture Properties, in Transportation Research Record: Journal of the Transportation Research Board, No. 1766, TRB, National Research Council, Washington, D.C., 2001, pp. 1-6.
13. Anderson, D. A., M. Marasteanu, L. Champion-Lapalu, L. H. Yan, M. Didier, and J.-P. Planche. Low Temperature Thermal Cracking of Asphalt Binders as Ranked by Strength and Fracture Properties. Proc., 2nd Eurasphalt and Eurobitumen Congress, Barcelona, Spain, Book 1, 2000, pp. 7-15.
14. Mai, Y.-W., S.-C. Wong, and X.-H. Chen. Application of Fracture Mechanics for Characterization of Toughness of Polymer Blends. In Polymer Blends, Volume 2: Performance (D. R. Paul and C. B. Bucknall, eds.), Wiley and Sons, Inc., New York, 2000, pp. 16-58.
15. Ioannides, A. M. Fracture Mechanics in Pavement Engineering: The Specimen-Size Effect. In Transportation Research Record, 1568, TRB, National Research Council, Washington, D.C., 1997, pp. 10-16.
16. Moavenzadeh, F. Asphalt Fracture. Proceedings, Association of Asphalt Paving Technologists, Vol. 36, 1967, pp. 51-79.
17. Bahgat, A. G., and M. Herrin. Brittle Fracture of Asphaltic Mixtures. Proceedings, Association of Asphalt Paving Technologists, Vol. 37, 1968, pp. 32-55.
18. Ramsamooj, D. V. Analysis and Design of the Flexibility of Pavements. Ph.D. thesis. Ohio State University, Columbus, 1970.
19. Majidzadeh, K., E. M. Kaufmann, and D. V. Ramsamooj. Application of Fracture Mechanics in the Analysis of Pavement Fatigue. Proceedings, Association of Asphalt Paving Technologists, Vol. 40, 1971, pp. 227-246.
20. Majidzadeh, K., E. M. Kaufmann, and C. L. Saraf. Analysis of Fatigue of Paving Mixtures from the Fracture Mechanics Viewpoint. In Fatigue of Compacted Bituminous Aggregate Mixtures, American Society for Testing and Materials, West Conshohocken, Pa., 1972, pp. 67-83.
21. Salam, Y. M., and C. L. Monismith. Fracture Characteristics of Asphalt Concrete. Proceedings, Association of Asphalt Paving Technologists, Vol. 41, 1972, pp. 215-256.
22. Van Dijk, W., and W. Visser. The Energy Approach to Fatigue for Pavement Design. Proceedings, Association of Asphalt Paving Technologists, Vol. 46, 1977, pp. 1-40.
23. Irwin, L. H. Use of Fracture Energy as a Fatigue Failure Criterion. Proceedings, Association of Asphalt Paving Technologists, Vol. 46, 1977, pp. 41-63.
24. Abdulshafi, A. A., and K. Majidzadeh. J-Integral and Cyclic Plasticity Approach to Fatigue and Fracture of Asphaltic Mixtures. In Transportation Research Record 1034, TRB, National Research Council, Washington, D.C., 1986, pp. 112-123.
25. Mahboub, K. Elasto-Plastic Fracture Characterization of Paving Materials at Low Temperatures. Journal of Testing and Evaluation, Vol. 18, No. 3, 1990, pp. 210-218.
26. Tseng, K.-H., and R. L. Lytton. Fatigue Damage Properties of Asphaltic Concrete Pavements. In Transportation Research Record 1286, TRB, National Research Council, Washington, D.C., 1990, pp. 150-163.
27. Ramsamooj, D. V. Prediction of Fatigue Life of Asphalt Concrete Beams from Fracture Tests. Journal of Testing and Evaluation, Vol. 19, No. 3, 1991, pp. 231-239.
28. Kim, Y. R., H.-J. Lee, and D. Little. Fatigue Characterization of Asphalt Concrete Using Viscoelasticity and Continuum Damage Theory. Journal of the Association of Asphalt Paving Technologists. Vol. 66, 1997, pp. 520-569.
29. Roque, R., B. Birgisson, B. Sangpetngam, and Z. Zhang. Hot Mix Asphalt Fracture Mechanics: A Fundamental Crack Growth Law for Asphalt Mixtures. Journal of the Association of Asphalt Paving Technologists, Vol. 71, 2002, pp. 816-827.
30. Wen, H., and Y. R. Kim. Simple Performance Test for Fatigue Cracking and Validation with WesTrack Mixtures. In Transportation Research Record: Journal of the Transportation Research Board, No. 1789, TRB, National Research Council, Washington, D.C., 2002, pp. 66-72.
31. AAPT Symposium on Tests for Fatigue Cracking. Journal of the Association of Asphalt Paving Technologists, Vol. 71,2002, pp. 828-839.
32. Cotterell, B., and J. K. Reddel. The Essential Work of Plane Stress Ductile Fracture. International Journal of Fracture, Vol. 13, No. 3, 1977, pp. 267-277.
33. Mai, Y. W., and B. Cotterell. On the Essential Work of Ductile Fracture in Polymers. International Journal of Fracture, Vol. 32, 1986, pp. 105-125.
34. Mai, Y. W., and P. Powell. Essential Work of Fracture and J-Integral Measurements for Ductile Polymers. Journal of Polymer Science, Vol. B29, 1991, pp. 785-793.
35. Wu, J., Y. W. Mai, and B. Cotterell. Fracture Toughness and Fracture Mechanisms of PBT/PC/IM Blend. Journal of Material Science, Vol. 28, 1993,pp.3373-3384.
36. Mai, Y. W. On the Plane-Stress Essential Fracture Work in Plastic Failure of Ductile Materials. International Journal of Mechanical Science, Vol. 35, No. 12, 1993, pp. 995-1005.
37. Karger-Kocsis, J. Toward Understanding the Morphology-Related Initiation and Propagation Behavior in Propylene Systems as Assessed by the Essential Work of Fracture Approach. Journal of Macromolecular Science, Vol. B38, No. 5 & 6, 1999, pp. 635-646.
38. Hashemi, S. Effect of Temperature on Fracture Toughness of an Amorphous Poly(ether-ether ketone) Film Using Essential Work of Fracture Analysis. Polymer Testing, Vol. 22, 2003, pp. 589-599.
39. Hashemi, S. Plane Stress Fracture of Polycarbonate Films. Journal of Materials Science, Vol. 28, 1993, pp. 6178-6184.
40. Hill, R. H.Journal of Mechanics and Physics of Solids, Vol.4, 1952, p. 19.
41. Hashemi, S., and D. O'Brien. The Essential Work of Plane-Stress Ductile Fracture of Poly(ether-ether-ketone). Journal of Materials Science, Vol. 28,1993, pp. 3977-3982.
42. Wu, J., and Y. W. Mai. The Essential Fracture Work Concept for Toughness Measurement of Ductile Polymers. Polymer Engineering and Science, Vol. 36, No. 18, 1996, pp. 2275-2288.
43. Hashemi, S., and J. G. Williams. Temperature Dependence of Essential and Non-Essential Work of Fracture Parameters for Polycarbonate Film. Plastics, Rubber and Composites, Vol. 29, No. 6, 2000, pp. 294-302.
44. Mai, Y. W., and B. Cotterell. Effects of Pre-Strain on Plane-Stress Ductile Fracture in Brass. Journal of Materials Science, Vol. 15, 1980, pp. 2296-2306.
45. Luna, P., C. Bermal, A. Cisilino, P. Frontini, B. Cotterell, and Y. W. Mai. The Application of the Essential Work of Fracture Methodology to the Plane-Strain Fracture of ABS 3-Point Bend Specimens. Polymer, Vol. 44, 2003, pp. 1145-1150.
46. Anderson, D. I., and M. L. Wiley. Force Ductility - An Asphalt Performance Indicator. Proceedings, Association of Asphalt Paving Technologists, Vol. 45, 1976, pp. 25-41.
47. Anderson, D. A., Y. M. Le Hir, M. O. Marasteanu, J.-P. Planche, D. Martin, and G. Gauthier. Evaluation of Fatigue Criteria for Asphalt Binders. In Transportation Research Record: Journal of the Transportation Research Board, No. 1766, TRB, National Research Council, Washington, D.C., 2001, pp. 48-56.
48. Andriescu, A., S. A. M. Hesp, and J. S. Youtcheff. Essential and Plastic Works of Ductile Fracture in Asphalt Mixtures. Proceedings, Canadian Technical Asphalt Association, 2004, pp. 97-125.