The modified super-ellipsoid yield criterion for human trabecular bone

Journal of Biomechanical Engineering

Volumn 126, Issue 6, 2004, Pages 677-684

  Bayraktar, Harun H ^a,b   Gupta, Atul ^a   Kwon, Ron Y ^a,b   Papadopoulos, Panayiotis ^a,b   Keaveny, Tony M ^a,b,c  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c University of California at Berkeley   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMECHANICS; COMPUTERIZED TOMOGRAPHY; FAILURE (MECHANICAL); FINITE ELEMENT METHOD; LOADS (FORCES); MATHEMATICAL MODELS; PARALLEL PROCESSING SYSTEMS; STRAIN; SUPERCOMPUTERS;

MICROCOMPUTED TOMOGRAPHY; SHEAR LOADING; SHEAR STRAIN; TRABECULAR BONES;

BONE;

ARTICLE; BIOMECHANICS; BONE STRENGTH; COMPUTER; COMPUTER ASSISTED TOMOGRAPHY; FEMUR NECK; FINITE ELEMENT ANALYSIS; HUMAN; LOAD CARRYING CAPACITY; LOADING TEST; MATHEMATICAL MODEL; MECHANICAL STRESS; NONLINEAR SYSTEM; SHEAR STRESS; STRESS STRAIN RELATIONSHIP; TRABECULAR BONE;

AGED; ANISOTROPY; BONE DENSITY; CADAVER; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; ELASTICITY; FEMALE; FEMUR HEAD; FINITE ELEMENT ANALYSIS; HUMANS; MALE; MIDDLE AGED; MODELS, BIOLOGICAL; RADIOGRAPHIC IMAGE INTERPRETATION, COMPUTER-ASSISTED; SHEAR STRENGTH; STRESS, MECHANICAL; TENSILE STRENGTH; WEIGHT-BEARING;

EID: 14344251491     PISSN: 01480731     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1763177     Document Type: Article

References (38)

1. Lotz, J. C., Cheal, E. J., and Hayes, W. C., 1991, "Fracture prediction for the proximal femur using finite-element models: Part I-Linear analysis," J. Biomech. Eng., 113, pp. 353-360.
2. Lotz, J. C., Cheal, E. J., and Hayes, W. C., 1991, "Fracture prediction for the proximal femur using finite-element models: Part II-Nonlinear analysis," J. Biomech. Eng., 113, pp. 361-365.
3. Cheal, E. J., Hayes, W. C., Lee, C. H., Snyder, B. D., and Miller, J., 1985, "Stress analysis of a condylar knee tibial component: influence of metaphyseal shell properties and cement injection depth," J. Orthop. Res., 3, pp. 424-434.
4. Keyak, J. H., and Rossi, S. A., 2000, "Prediction of femoral fracture load using finite element models: an examination of stress- and strain-based failure theories," J. Biomech., 33, pp. 209-214.
5. Cody, D. D., Gross, G. J., Hou, F. J., Spencer, H. J., Goldstein, S. A., and Fyhrie, D. P., 1999, "Femoral strength is better predicted by finite-element models than QCT and DXA," J. Biomech., 32, pp. 1013-1020.
6. Ford, C. M., Keaveny, T. M., and Hayes, W. C., 1996, "The effect of impact direction on the structural capacity of the proximal femur during falls," J. Bone Miner. Res., 11, pp. 377-383.
7. Liebschner, M. A. K., Rosenberg, W. S., and Keaveny, T. M., 2001, "Effects of bone cement volume and distribution on vertebral stiffness after vertebroplasty," Spine, 26, pp. 1547-1554.
8. Oden, Z. M., Selvitelli, D. M., and Bouxsein, M. L., 1999, "Effect of local density changes on the failure load of the proximal femur," J. Orthop. Res., 17, pp. 661-667.
9. Keaveny, T. M., Wachtel, E. F., Ford, C. M., and Hayes, W. C., 1994, "Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus," J. Biomech., 27, pp. 1137-1146.
10. Morgan, E. F., and Keaveny, T. M., 2001, "Dependence of yield strain of human trabecular bone on anatomic site," J. Biomech., 34, pp. 569-577.
11. Cowin, S. C., 1986, "Fabric dependence of an anisotropic strength criterion," Mech. Mater., 5, pp. 251-260.
12. Tsai, S., and Wu, E., 1971, "A general theory for strength of anisotropic materials," J. Comp. Mat., 5, pp. 58-80.
13. Wu, E., 1974, "Phenomenological anisotropic failure criterion.," Mechanics of Composite Materials, G. Sendecky, ed., Academic Press, New York, pp. 353-431.
14. Keaveny, T. M., Wachtel, E. F., Zadesky, S. P., and Arramon, Y. P., 1999, "Application of the Tsai-Wu quadratic multiaxial failure criterion to bovine trabecular bone," J. Biomech. Eng., 121, pp. 99-107.
15. Niebur, G. L., Feldstein, M. J., and Keaveny, T. M., 2002, "Biaxial failure behavior of bovine tibial trabecular bone," J. Biomech. Eng., 124, pp. 699-705.
16. Patel, M. R., 1969, "The deformation and fracture of rigid cellular plastics under multiaxial stress," p. 196. Berkeley, CA: University of California, Berkeley, CA.
17. Zaslawsky, M., 1973, "Multiaxial-stress studies on rigid polyurethane foam," Exp. Mech., 2, pp. 70-76.
18. Gibson, L. J., Ashby, M. F., Zhang, J., and Triantafillou, T. C., 1989, "Failure surfaces for cellular materials under multiaxial loads-I. Modelling," Int. J. Mech. Sci., 31, pp. 635-663.
19. Triantafillou, T. C., Zhang, J., Shercliff, T. L., Gibson, L. J., and Ashby, M. F., 1989, "Failure surfaces for cellular materials under multiaxial loads-II. Comparison of models with experiment," Int. J. Mech. Sci., 31, pp. 665-678.
20. Fenech, C. M., and Keaveny, T. M., 1999, "A cellular solid criterion for predicting the axial-shear failure properties of trabecular bone.," J. Biomech. Eng., 121, pp. 414-422.
21. Bayraktar, H. H., and Keaveny, T. M., 2004, "Mechanisms of uniformity of yield strains for trabecular bone," J. Biomech., In Press.
22. Morgan, E. F., Bayraktar, H. H., Yeh, O. C., and Keaveny, T. M., 2004, "Contribution of inter-site variations in architecture to trabecular bone apparent yield strain," J. Biomech., In Press.
23. Guo, X. E., 2001, "Mechanical properties of cortical bone and cancellous tissue," Bone Mechanics Handbook, S. C. Cowin, ed., CRC Press, Boca Raton, pp. 10.11-10.23.
24. Bayraktar, H. H., Morgan, E. F., Niebur, G. L., Morris, G., Wong, E. K., and Keaveny, T. M., 2004, "Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue," J. Biomech., 37, pp. 27-35.
25. Beck, J. D., Canfield, B. L., Haddock, S. M., Chen, T. J. H., Kothari, M., and Keaveny, T. M., 1997, "Three-dimensional imaging of trabecular bone using the computer numerically controlled milling technique," Bone (N.Y.), 21, pp. 281-287.
26. Rüegsegger, P., Koller, B., and Müller, R., 1996, "A microtomographic system for the nondestructive evaluation of bone architecture," Calcif. Tissue Int., 58, pp. 24-29.
27. Niebur, G. L., Feldstein, M. J., Yuen, J. C., Chen, T. J., and Keaveny, T. M., 2000, "High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone," J. Biomech., 33, pp. 1575-1583.
28. Niebur, G. L., Yuen, J. C., Hsia, A. C., and Keaveny, T. M., 1999, "Convergence behavior of high-resolution finite element models of trabecular bone," J. Biomech. Eng., 121, pp. 629-635.
29. Van Rietbergen, B., Odgaard, A., Kabel, J., and Huiskes, R., 1996, "Direct mechanics assessment of elastic symmetries and properties of trabecular bone architecture," J. Biomech., 29, pp. 1653-1657.
30. Barr, A. H., 1981, "Superquadratics and angle-preserving transformations," IEEE Comput. Graphics and Appl., 1, pp. 11-23.
31. Hildebrand, T., Laib, A., Müller, R., Dequeker, J., and Rüegsegger, P., 1999, "Direct three-dimensional morphometric analysis of human cancellous bone: microstructural data from spine, femur, iliac crest, and calcaneus," J. Bone Miner. Res., 14, pp. 1167-1174.
32. Müller, R., Gerber, S. C., and Hayes, W. C., 1998, "Micro-compression: a novel technique for the nondestructive assessment of local bone failure," Technol. Health Care, 6, pp. 433-444.
33. Stölken, J. S., and Kinney, J. H., 2003, "On the importance of geometric nonlinearity in finite-element simulations of trabecular bone failure," Bone (N.Y.), 33, pp. 494-504.
34. Stone, J. L., Beaupre, G. S., and Hayes, W. C., 1983, "Multiaxial strength characteristics of trabecular bone," J. Biomech., 16, pp. 743-752.
35. Turner, C. H., 1989, "Yield behavior of bovine cancellous bone," J. Biomech. Eng., 111, pp. 256-260.
36. Chang, W. C. W., Christensen, T. M., Pinilla, T. P., and Keaveny, T. M., 1999, "Isotropy of uniaxial yield strains for bovine trabecular bone," J. Orthop. Res., 17, pp. 582-585.
37. Simo, J. C., and Hughes, T. J. R., 1998, "Computational Inelasticity," Springer-Verlag, New York.
38. Adams, M., 2002, "Evaluation of three unstructured multigrid methods on 3D finite element problems in solid mechanics," Int. J. Numer. Methods Eng., 55, pp. 519-534.