Comparison of confinement models for fiber-reinforced polymer-wrapped concrete

ACI Structural Journal

Volumn 102, Issue 1, 2005, Pages 62-72

  Bisby, Luke A ^a   Dent, Aaron J S ^a   Green, Mark F ^a  

^a QUEEN S UNIVERSITY   (Canada)

Author keywords

Columns; Fibers; Polymer; Reinforcement; Repair

Indexed keywords

CONCRETE REINFORCEMENTS; FIBER REINFORCED PLASTICS; LOAD TESTING; MATHEMATICAL MODELS; REINFORCED CONCRETE; STRAIN; STRENGTH OF MATERIALS; STRUCTURAL ANALYSIS; STRUCTURAL DESIGN;

CONFINEMENT MODEL; FIBER REINFORCED POLYMER WRAPPED CONCRETE; REHABILITATION TECHNIQUE; REINFORCED CONCRETE COLUMN; STRENGTHENING TECHNIQUE; ULTIMATE STRAIN;

COLUMNS (STRUCTURAL);

EID: 14244267708     PISSN: 08893241     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (40)

1. Fardis, M. N., and Khalili, H., "Concrete Encased in Fiberglass-Reinforced Plastic," ACI Journal, Proceedings V. 78, No. 6, Nov.-Dec. 1981, pp. 440-446.
2. Karbhari, V. M., and Gao, Y., "Composite Jacketed Concrete Under Uniaxial Compression - Verification of Simple Design Equations," Journal of Materials in Civil Engineering, ASCE, V. 9, No. 4, 1997, pp. 185-192.
3. Samaan, M.; Mirmiran, A.; and Shahawy, M., "Model of Concrete Confined by Fiber Composites," Journal of Structural Engineering, ASCE, V. 124, No. 9, 1998, pp. 1025-1031.
4. Miyauchi, K.; Nishibayashi, S.; and Inoue, S., "Estimation of Strengthening Effects with Carbon Fiber Sheet for Concrete Column," Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Third International Symposium, 1997, pp. 217-224.
5. Toutanji, H. A., "Stress-Strain Characteristics of Concrete Columns Externally Confined with Advanced Fiber Composite Sheets," ACI Materials Journal, V. 96, No. 3, May-June 1999, pp. 397-405.
6. Spoelstra, M. R., and Monti, G., "FRP-Confined Concrete Model," Journal of Composites for Construction, ASCE, V. 3, No. 3, 1999, pp. 143-150.
7. Xiao, Y., and Wu, H., "Compressive Behavior of Concrete Confined by Carbon Fiber Composite Jackets," Journal of Materials in Civil Engineering, ASCE, V. 12, No. 2, 2000, pp. 139-146.
8. Theriault, M., and Neale, K. W., "Simplified Design Equations for Reinforced Concrete Columns Confined with FRP Wraps," FRP Composites in Civil Engineering, J. G. Teng, ed., Elsevier Science Ltd., Hong Kong, 2001, pp. 741-748.
9. Lam, L., and Teng, J. G., "Strength Models for Circular Concrete Columns Confined by FRP Composites," Fifth Symposium on Fiber-Reinforced-Plastic Reinforcement for Concrete Structures (FRPRCS-5), C. Burgoyne, ed., Thomas Telford, London, 2001, pp. 835-844.
10. ACI Committee 440, "Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02)," American Concrete Institute, Farmington Hills, Mich., 45 pp.
11. Suter, R., and Pinzelli, R., "Confinement of Concrete Columns with FRP Sheets," Fifth Symposium on Plastic-Reinforced-Plastic Reinforcement for Concrete Structures (FRPRCS-5), C. Burgoyne, ed., Thomas Telford, London, 2001, pp. 791-802.
12. Theriault, M.; Claude, S.; and Neale, K. W., "Effect of Size and Slenderness Ratio on the Behavior of FRP-Wrapped Columns," Fifth Symposium on Plastic-Reinforced-Plastic Reinforcement for Concrete Structures (FRPRCS-5), C. Burgoyne, ed., Thomas Telford, London, 2001, pp. 765-771.
13. De Lorenzis, L., and Tepfers, R., "Comparative Study of Models on Confinement of Concrete Cylinders with Fiber-Reinforced Polymer Composites," Journal of Composites for Construction, ASCE, V. 7, No. 3, 2003, pp. 219-237.
14. Howie, I., and Karbhari, V. M., "Effect of Tow-Sheet Composite Wrap Architecture on Strengthening of Concrete Due to Confinement I: Experimental Studies," Journal of Reinforced Plastics and Composites V. 14, No. 9, 1995, pp. 1008-1030.
15. Callery, K. M., "Environmental Effects on the Behavior of Wrapped Concrete Compression Members," MSc thesis, Queen's University, Kingston, Ontario, Canada, 2000, 216 pp.
16. Nanni, A., and Bradford, N. M., "FRP Jacketed Concrete Under Uniaxial Compression," Construction and Building Materials, V. 9, No. 2, 1995, pp. 115-124.
17. Picher, F., "Confinement de Cylindres en Béton par des Composites Carbone-Epoxie Unidirectionnelles," MS thesis, University of Sherbrooke, Sherbrooke, Canada, 1995. (in French)
18. Kawashima, K.; Hosotani, M.; and Hoshikuma, J., "A Model for Confinement Effect for Concrete Cylinders Confined by Carbon Fiber Sheets," NCEER-INCEDE Workshop on Earthquake Engineering Frontiers of Transportation Facilities, NCEER, State University of New York, Buffalo, N.Y., 1997.
19. Rochette, P., and Labossiere, P. J., "Axial Testing of Rectangular Column Models Confined with Composites," Journal of Composites for Construction, ASCE, V. 4, No. 3, pp. 129-136.
20. Harmon, T. G., and Slattery, K. T., "Advanced Composite Confinement of Concrete," Advanced Composite Materials for Bridges and Structures 1 K. W. Neale and P. J. Labossiere, eds., Canadian Society for Civil Engineering, Montreal, Canada, 1992, pp. 149-156.
21. Matthys, S.; Taerwe, L.; and Audenaert, K., "Tests on Axially Loaded Concrete Columns Confined by Fiber Reinforced Polymer Sheet Wrapping," Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, Fourth International Symposium, SP-188, C. W. Dolan, S. H. Rizkalla, and A. Nanni, eds., American Concrete Institute, Farmington Hills, Mich., 1999, pp. 217-229.
22. Demers, M.; Hebert, D.; Gauthier, M.; Labossiere, P.; and Neale, K. W., "The Strengthening of Structural Concrete with an Aramid Woven Fiber/ Epoxy Resin Composite," Advanced Composite Materials for Bridges and Structures II, M. El-Badry, Ed., Avantage Inc., Montreal, Canada, 1996, pp. 435-442.
23. Demers, M., and Neale, K. W., "Strengthening of Concrete Columns with Unidirectional Composite Sheets," Developments in Short and Medium Span Bridge Engineering '94, 1994, pp. 895-905;
24. Santarosa, D.; Filho, A. C.; Beber, A. J.; and Campagnolo, J. L., "Concrete Columns Confined with CFRP Sheets," FRP Composites in Civil Engineering, J. G. Teng, ed., Elsevier Science Ltd., Hong Kong, 2001, pp. 301-308.
25. El-Hacha, R.; Green, M. F.; and Wight, G., "CFRP Wrapped Concrete Cylinders in Severe Environmental Conditions," Structural Faults and Repair 1999, M. C. Forde, ed., Engineering Technics Press, Edinburgh, UK. 1999.
26. Purba, B. K., and Muff, A. A., "Investigation of the Behavior of Circular Concrete Columns Reinforced with Carbon Fiber Reinforced Polymer (CFRP) Jackets," Canadian Journal of Civil Engineering, V. 26, 1999, pp. 590-596.
27. Miyauchi, K.; Nishibayashi, S.; and Inoue, S., "Estimation of Strengthening Effects with Carbon Fiber Sheet for Concrete Column," Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Third International Symposium, 1997, pp. 217-224.
28. Watanabe, K.; Nakamura, H.; Honda, Y.; Toyoshima, M.; Iso, M.; Fujimaki, T.; Kaneto, M.; and Shirai, N., "Confinement Effect of FRP Sheet on Strength and Ductility of Concrete Cylinders Under Uniaxial Compression," Non-Metallic (FRP) Reinforcement for Concrete Structures, Proceedings of the Third International Symposium, 1997, pp. 233-240.
29. Karabinis, A. I., and Rousakis, T. C., "Carbon FRP Confined Concrete Elements Under Axial Load," FRP Composites in Civil Engineering, J. G. Teng, ed., Elsevier Science Ltd., Hong Kong, 2001, pp. 309-316.
30. ISIS Canada, Design Manual No. 4: Strengthening Reinforced Concrete Structures with Externally Bonded Fiber Reinforced Polymers, Intelligent Sensing for Innovative Structures (ISIS) Canada, Winnipeg, 2001.
31. Teng, J. G.; Chen, J. F.; Smith, S. T.; and Lam, L., FRP Strengthened RC Structures, John Wiley & Sons, Inc., UK, 2002, 266 pp.
32. CAN/CSA-S806; "Design and Construction of Building Components with Fiber-Reinforced Polymers," Canadian Standards Association, Ottawa, 2002.
33. Richart, F. E.; Grandtzaeg, A.; and Brown, R. L., "The Failure of Plain and Spirally Reinforced Concrete in Compression," Bulletin No. 190, Engineering Experiment Station, University of Illinois, Urbana, Apr. 1929, 72 pp.
34. Newman, K., and Newman, J. B., "Failure Theories and Design Criteria for Plain Concrete," Proceedings of the International Civil Engineering Materials Conference on Structure, Solid Mechanics and Engineering Design, Wiley Interscience, New York, Part 2, 1972, pp. 963-995.
35. Considere, A., "Résistance a Compression du Beéton Armé et du Beton Frette," Génie Civil, 1929. (in French)
36. Iyengar, K. T. S. R.; Desayi, P.; and Reddy, K. N., "Flexure of Reinforced Concrete Beams with Confined Compression Zones," ACI Journal, Proceedings V. 68, No. 9, Sept. 1971, pp. 719-725.
37. Balmer, G. G., "Shear Strength of Concrete Under High Triaxial Stress - Computation of Mohr's Envelope as a Curve," Report SP-23, Structural Research Laboratory, U.S. Bureau of Reclamation, 1944.
38. Mander, J. B.; Priestley, M. J. N.; and Park, R., "Theoretical Stress-Strain Model for Confined Concrete," Journal of Structural Engineering, ASCE, V. 114, No. 8, 1988, pp. 1804-1823.
39. Allen, D. E., "Limit States Design - A Probabilistic Study," Canadian Journal of Civil Engineering, V. 2, 1975, pp. 36-49.
40. Bartlett, F. M.; Hong, H. P.; and Zhou, W., "Load Factor Calibration for the Proposed 2005 Edition of the National Building Code of Canada: Statistics of Loads and Load Effects," Canadian Journal of Civil Engineering, V. 30, 2003, pp. 429-439.