Bond between carbon fiber reinforced polymer bars and concrete. I: Experimental study

Journal of Composites for Construction

Volumn 7, Issue 2, 2003, Pages 154-163

  Malvar, L J ^a   Cox, J V ^b   Bergeron Cochran, K ^c  

^a NAVAL FACILITIES ENGINEERING SERVICE CENTER   (United States)

^b U S ARMY RESEARCH LABORATORY   (United States)

^c University of Illinois at Urbana Champaign   (United States)

Author keywords

Bars; Bonding; Carbon; Composite materials; Concrete; Confinement; Fiber reinforced polymers; Structural reinforcement

Indexed keywords

BARS; CONFINEMENT; FIBER REINFORCED POLYMERS; STRUCTURAL REINFORCEMENT;

BARS (METAL); BONDING; COMPOSITE MATERIALS; CONCRETES; DEFORMATION; POLYMERS; STEEL; STRESSES;

CARBON FIBERS;

EID: 13844297781     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1090-0268(2003)7:2(154)     Document Type: Article

References (47)

1. Achillides, Z., Pilakoutas, K., and Waldron P. (1997). "Bond behaviour of FRP bars to concrete." Proc., FRPRCS-3, Non-metallic (FRP) reinforcement for concrete structures, 3rd FRP International Symposium, Japan Concrete Institute, Sapporo, Japan, 2, 341-348.
2. ACI 318. (1999). "Building code requirements for structural concrete." American Concrete Institute, P.O. Box 9094, Farmington Hills, Mich.
3. ACI 440 Committee on Fiber Reinforced Polymer Reinforcement. (2001). "Guide for the design and construction of concrete reinforced with FRP bars." ACI 440.1R-01, American Concrete Institute, P.O. Box 9094, Farmington Hills, Mich.
4. ASCE Task Committee on Finite Element Analysis of Reinforced Concrete Structures. (1982). State-of-the-Art Rep. on Finite Element Analysis of Reinforced Concrete, American Society of Civil Engineers, Reston, Va.
5. ASTM D 3916 (1984). "Test method for tensile properties of pultruded glass-fiber-reinforced plastic rod," Annual book of ASTM standards, Vol. 08.03.
6. Bakht, B., Al-Bazi, G., Banthia, N., Cheung, M., Erki, M. A., Faoro, M., Machida, A., Mufti, A. A., Neale, K., and Tadros, G. (2000). "Canadian bridge design code provisions for fiber-reinforced structures." J. Compos. Constr., 4(1), 3-15.
7. Benmokrane, B., and Chennouf, A. (1997). "Pull-out behavior of FRP ground anchors," Proc., 42nd SAMPE Symp. and Exhibition, Anaheim, Calif. 42(1), 311-324.
8. Benmokrane, B., and Rahman, H., eds. (1998). First Int. Conf. on Durability of Composites for Construction, CDCC'98, Sherbrooke, Qué., Canada.
9. Ciampi, V., Eligehausen, R., Bertero, V. V., and Popov, E. P. (1981). "Analytical model for deformed bar bond under generalized excitations," IABSE Colloquium on Advanced Mechanics in Reinforced Concrete, Delft, The Netherlands.
10. Cosenza, E., Manfredi, G., and Realfonzo, R. (1995). "Analytical modeling of bond between FRP reinforcing bars and concrete." Proc., FRPRCS-2, Non-Metallic (FRP) Reinforcement for Concrete Structures, Second FRP International Symposium, Gent, 165-171.
11. Cosenza, E., Manfredi, G., Pecce, M., and Realfonzo, R. (1999). "Bond between glass fiber reinforced plastic reinforcing bars and concrete-experimental analysis." Proc., FRPRCS-4, 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI SP-188, Baltimore, 347-358.
12. Cosenza, E., Manfredi, G., and Realfonzo, R. (1997). "Behavior and modeling of bond of FRP rebars to concrete." J. Compos. Constr., 1(2), 40-51.
13. Cox, J. V. (1994). "Development of a plasticity bond model for reinforced concrete-theory and validation for monotonie applications." PhD thesis, Univ. of California, Davis, Calif.
14. Cox, J. V. (1998). "A dilatational interface model for bond." Bond and Development of Reinforcement, ACI SP-180, American Concrete Institute, 81-103.
15. Cox, J. V., and Bergeron Cochran, K. (2003). "Bond between carbon fiber reinforced polymer bars and concrete. II: Computational modeling." J. Compos. Constr., 7(2), 164-171.
16. Cox, J. V., Bergeron, K., and Malvar, L. J. (2000). "A combined experimental and numerical study of the bond between lightweight concrete and CFRP Bars." Sessions on Interface Degradation, 14th ASCE Engineering Mechanics Conf., Univ. of Texas at Austin.
17. Cox, J. V., and Guo, J. (1999). "Modeling stress state dependency of bond behavior of fiber reinforced polymer tendons." Proc. FRPRCS-4, 4th Int. Symp. Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI SP-188, Baltimore, 791-805.
18. Cox, J. V., and Hermann, L. R. (1992). "Confinement stress dependent bond behavior, Part II: A two degree of freedom plasticity model." Bond in Concrete, Proc. Int. Conf., Riga, Latvia, 11/11-11/20.
19. Cox, J. V., and Herrmann, L. R. (1998). "Development of a plasticity bond model for steel reinforcement." Mech. Cohesive-Frict. Mater., 3, 155-180.
20. Cox, J. V., and Herrmann, L. R. (1999). "Validation of a plasticity bond model for steel reinforcement." Mech. Cohesive-Frict. Mater., 4, 361-389.
21. Dolan, C. W., Rizkalla, S. H., and Nanni, A., eds. (1999). Proc., 4th Int. Symp. Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, FRPRCS-4, ACI SP-188, Baltimore.
22. Eligehausen, R., Popov, E. P., and Bertero, V. V. (1983). "Local bond stress-slip relationships of deformed bars under generalized excitations." Rep. No. UCB/EERC 83/23, Earthquake Engineering Research Center, University of California, Berkeley.
23. FIB Bulletin 10. (2000). "Bond of reinforcement in concrete." State-of-the-art Rep., Fédération Internationale du Béton, Federal Institute of Technology, Département Génie Civil, Lausanne, Switzerland.
24. Focacci, F., Nanni, A., and Bakis, C. E. (2000). "Local bond-slip relationship for FRP reinforcement in concrete." J. Compos. Constr., 4(1), 24-31.
25. Gambarova, P. G., Rosati, G. P., and Schumm, C. E. (1998). "Bond and splitting: A vexing question." Bond and Development of Reinforcement, ACI SP-180, American Concrete Institute, 23-43.
26. Iyer, S. L., and Sivakumar, R. (1994). "Graphite prestressed piles and fiberglass prestressed pilecaps for U.S. Navy Pier in California." Proc. Infrastructure: New Materials and Methods for Repair, 3rd Materials Engineering Conf., K. Basham, ed., San Diego, 392-399.
27. Keuser, M., and Mehlhorn, G. (1987). "Finite element models for bond problems." J. Struct. Eng., 113(10), 2160-2173.
28. Lundgren, K., and Gylltoft, K. (2000). "A model for the bond between concrete and reinforcement." Mag. Concrete Res., 52(1), 53-63.
29. Mahmoud, Z. I., Rizkalla, S. H., and Zaghloul, E. R. (1999). "Transfer and development lengths of carbon fiber reinforced polymers pre-stressing reinforcement." ACI Struct. J., 96(4), 594-602.
30. Malvar, L. J. (1992a). "Confinement stress dependent bond behavior, Part I: Experimental investigation." Bond in Concrete, Proc., Int. Conf. Riga, Latvia, 1/79-1/88.
31. Malvar, L. J. (1992b). "Bond of reinforcement under controlled confinement." ACI Mater. J., 89(6), 593-601.
32. Malvar, L. J. (1992c). "Bond of reinforcement under controlled radial pressure." Studi e Ricerche, 13, Structural Engineering Department, Polytechnic University of Milan, Milan, Italy, 83-118.
33. Malvar, L. J. (1995). "Tensile and bond properties of GFRP reinforcing bars." ACI Mater. J., 92(3), 276-285.
34. Malvar, L. J. (1998). "Durability of composites in concrete." Proc., 1st Int. Conf. on Durability of Composites for Construction, CDCC'98, Sherbrooke, Que., Canada, 361-372.
35. McCabe, S. L., and Pantazopoulou, S. J. (1998). "Evaluation of bond performance in reinforced concrete structures." Bond and Development of Reinforcement, ACI SP-180, American Concrete Institute, 1-21.
36. Nanni, A., Conrad, J. O., Bakis, C. E., and Uchno, J. (1997). "Material properties of C-bar reinforcing bar," Civil Engineering Department, Pennsylvania State University, PA (also Research Bulletin 97-005, Marshall Industries Composites, Lima, Ohio).
37. Razaqpur, A. G., ed. (2000). Proc., 3rd Int. Conf., on Advanced Composite Materials in Bridges and Structures, ACMBS-3, Ottawa, August 2000.
38. Rizkalla, S., Abdelrahman, and McVey, M. (1997). "Material properties of C-bar reinforcing rod," ISIS Canada, Winnipeg, Man., Canada (also Research Bulletin 97-006, Marshall Industries Composites, Lima, Ohio).
39. Saadatmanesh, H., and Ehsani, M. R., eds. (1998). "Fiber composites in infrastructure." Proc., 2nd Int. Conf. on Composites in Infrastructure, ICCI'98, Tucson.
40. Shield, C. K., French, C. W., and Hanus, J. P. (1999). "Bond of glass fiber reinforced plastic reinforcing bar for consideration in bridge decks." Proc., FRPRCS-4, 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures, ACI SP-188, Baltimore, 393-406.
41. Sonobe, Y., et al. (1997). "Design guidelines of FRP reinforced concrete building structures." J. Compos. Constr., 1(3), 90-115.
42. Taly, N., and GangaRao, H. V. S. (2001). "Bond behavior of FRP reinforcing bars-The state of the art." Proc., 46th Int. SAMPE Symp., Long Beach, Calif., 2, 1784-1796.
43. Tepfers, R., Molander, I., and Thalenius, K. (1992). "Experience from testing of concrete reinforced with carbon fiber and aramid fiber strands." Proc., XIV Nordic Concrete Congress and Nordic Concrete Industry Meeting, 337-347 (also in Publication 92:6, Chalmers Institute of Technology, Göteborg, Sweden).
44. Tokyo Rope Manufacturing Co. Ltd. (1989). "CFCC technical data." Corporate Rep.
45. Tork, B. S. (1999). "Study of the combined mechanisms of fissuration and bond in reinforced and prestressed concrete members," PhD thesis, Escuela Technica Superior de Ingenieros de Caminos Canales y Puertos, Polytechnic Univ. of Madrid, Spain (in Spanish).
46. Unified Facilities Guide Specifications. (1999). "Marine concrete." UFGS 03311, Joint Departments of the Army, Air Force and Navy, Washington, D.C.
47. Yamaguchi, T., Kato, Y., Nishimura, T., and Uomoto, T. (1997). "Creep rupture of FRP rods made of aramid, carbon and glass fibers." Proc., FRPRCS-3, 3rd Int. Symp. on NonMetallic (FRP) Reinforcements for Concrete Structures, Japan Concrete Institute, Sapporo, Japan, 2, 179-186.