Comparing CPT and pile base resistance in sand

Proceedings of the Institution of Civil Engineers: Geotechnical Engineering

Volumn 158, Issue 1, 2005, Pages 3-14

  White, David J ^a   Bolton, Malcolm D ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

Field testing monitoring; Piles piling

Indexed keywords

DATABASE SYSTEMS; LOAD TESTING; MATHEMATICAL MODELS; PILES; STRUCTURAL LOADS;

END BEARING CAPACITY; PARTIAL MOBILIZATION; PILE BASE RESISTANCE; PILE TESTS;

SAND;

CONE PENETRATION TEST; GEOTECHNICAL ENGINEERING; LOADING TEST; PILE; SAND;

EID: 13644263485     PISSN: 13532618     EISSN: None     Source Type: Journal    
DOI: 10.1680/geng.2005.158.1.3     Document Type: Article

References (51)

1. Kay J. N. Ultimate capacity of driven piles in sand. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 1997, 125, No. 2, 5-70.
2. Lings M. L. Predicting the shaft resistance of driven preformed piles in sand. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 1997, 125, No. 2, 71-84.
3. Randolph M. F., Dolwin J. and Beck R. Design of driven piles in sand. Géotechnique, 1994, 44, No. 3, 427-448.
4. Jardine R. J. and Chow F. C. New Design Methods for Offshore Piles Marine Technology Directorate, London, 1996, MTD Publication 96/103.
5. Baligh M. M. Strain path method. ASCE Journal of Geotechnical Engineering, 1985, 111, No. 9, 1108-1136.
6. Bustamante M. and Gianeselli L. Pile bearing capacity by means of static penetrometer CPT. Proceedings of the 2nd European Symposium on Penetration Testing, Amsterdam, 1982, 493-500.
7. De Ruiter J. and Beringen F. L. Pile foundations for large North Sea structures. Marine Geotechnology, 1979, 3, No. 3, 267-314.
8. Meyerhof G. G. Bearing capacity and settlement of pile foundations. ASCE Journal of Geotechnical Engineering, 1976, 102, No. GT3, 197-228.
9. Meyerhof G. G. and Valsangkar A. J. Bearing capacity of piles in layered soils. Proceedings of the 8th International Conference on Soil Mechanics and Foundation Engineering, Moscow, 1977, 1, 645-650.
10. Winterkorn A. F. and Fang S. Y. Foundation Engineering Handbook. Van Nostrand Reinhold, New York, 1975.
11. Borghi X., White D. J., Bolton M. D. and Springman S. Empirical pile design based on CPT results: an explanation for the reduction of unit base resistance between CPTs and piles. Proceedings of the 5th International Conference on Deep Foundation Practice, Singapore, 2001, 125-132.
12. Kraft L. M. Computing axial pile capacity in sands for offshore conditions. Marine Geotechnology, 1990, 9, 61-72.
13. Chow F.C. Investigations into the Behaviour of Displacement Piles for Offshore Foundations. PhD thesis, University of London (Imperial College), 1997.
14. Meyerhof G. G. Scale effects of ultimate capacity. ASCE Journal of Geotechnical Engineering, 1983, 109, No. 6, 797-806.
15. Tejchman A. and Gwizdala K. Analysis of safety factors of bearing capacity for large diameter piles. Proceedings of the 7th European Conference on Soil Mechanics and Foundation Engineering, Brighton, 1979, 1, 293-296.
16. De Beer E. E. Bearing capacity of shallow foundations on sand. Proceedings of a Symposium on Bearing Capacity and Settlement of Foundations, Duke University, 1965, pp. 15-33.
17. Gottardi G., Ricceri G. and Simonini P. On the scale effect of footings on sand under general loads. Proceedings of the 13th International Conference on Soil Mechanics and Foundation Engineering, New Delhi, 1994, 709-712.
18. Clark J. I. Settlement and bearing capacity of very large foundations on strong soils. Canadian Geotechnical Journal, 1998, 35, No. 1, 131-145.
19. Bolton M. D. The strength and dilatancy of sands. Géotechnique, 1986, 36, No. 1, 65-78.
20. Graham J. and Hovan J. M. Stress characteristics for bearing capacity in sand using a critical state model. Canadian Geotechnical Journal, 1986, 23, No. 2, 195-202.
21. Ueno K., Miura K., Kusakabe O. and Nishimura M. Reappraisal of size effect of bearing capacity from plastic solution. ASCE Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127, No. 3, 275-281.
22. Zhu F., Clark J. I. and Phillips R. Scale effect of strip and circular footings resting on dense sand. ASCE Journal of Geotechnical and Geoenvironmental Engineering, 2001, 127, No. 7, 613-621.
23. Garnier, J. Size effect in shear interfaces. Proceedings of a Workshop on Constitutive and Centrifuge Modelling: Two Extremes, Monte Verita, 2002, pp. 335-346.
24. Petley D. J. The Shear Strength of Soils at Large Strains. PhD thesis, University of London, 1966.
25. Cuckson J. Shear Zones and Progressive Failure in Overconsolidated Clay. PhD thesis, Cambridge University, 1977.
26. Palmer A. C., White D. J., Baumgard A. J., Bolton M. D., Barefoot A. J., Finch M., Powell T., Faranski A. S. and Baldry J. A. S. Uplift resistance of buried submarine pipelines: comparison between centrifuge modelling and full-scale tests. Géotechnique, 2003, 53, No. 10, 877-883.
27. Meyerhof G. G. The ultimate bearing capacity of foundations. Géotechnique, 1951, 2, No. 4, 301-332.
28. Berezantzev V. C., Kristoforov V. and Golubkov V. Load-bearing capacity and deformation of piled foundations. Proceedings of the 4th International Conference on Soil Mechanics and Foundation Engineering, Paris, 1961, 2, 11-12.
29. White D. J. An Investigation into the Behaviour of Pressed-in Piles PhD thesis, Cambridge University, 2002.
30. White D. J. and Bolton M. D. Displacement and strain paths during pile installation in sand. Géotechnique, 2004 54, No. 6, 375-397.
31. Lee J. H. and Salgado R. Determination of pile base resistance in sands. ASCE Journal of Geotechnical and Geoenvironmental Engineering, 125, No. 8, 673-683.
32. White D. J. Field Measurements of CPT and Pile Base Resistance in Sand. Cambridge University Engineering Department, 2003, Technical Report CUED-D-SOILS-TR327.
33. Lehane B. M. Experimental Investigations of Pile Behaviour Using Instrumented Field Piles. PhD thesis, Imperial College, University of London, 1992.
34. De Beer E. E., Lousberg D., De Jonghe A., Carpentier R. and Wallays M. Analysis of the results of loading tests performed on displacement piles of different types and sizes penetrating at a relatively small depth into a very dense layer. Proceedings of a Conference on Recent Developments in the Design and Construction of Piles, London, 1979, pp. 199-211.
35. Briaud J.-L., Tucker L. M. and Ng E. Axially loaded 5 pile group and a single pile in sand. Proceedings of the 12th International Conference on Soil Mechanics and Foundations Engineering, Rio de Janeiro, 1989, 2, 1121-1124.
36. Altaee A., Fellenius B. H. and Evgin E. Axial load transfer for piles in sand. I. Tests on an instrumented precast pile. Canadian Geotechnical Journal, 1992, 29, No. 1, 11-20.
37. Altaee A., Fellenius B. H. and Evgin E. Load transfer for piles in sand and the critical depth. Canadian Geotechnical Journal, 1993, 30, No. 3, 455-463.
38. Fellenius B. H. Prediction of pile capacity. Proceedings of a Symposium on Predicted and Observed Behaviour of Piles, ASCE Special Geotechnical Publication 23, 1989, pp. 293-302.
39. BCP Committee. Field tests on piles in sand. Soils and Foundations 1971, 11, No. 2, 29-49.
40. Gregersen O. S., Aas G. and Dibiagio E. Load tests on friction piles in loose sand. Proceedings of the 8th International Conference on Soil Mechanics and Foundation Engineering, Moscow, 1973, 2, 109-117.
41. De Nicola A. and Randolph M. F. Tensile and compressive shaft capacity of piles in sand. ASCE Journal of Geotechnical Engineering, 1993, 119, No. 12, 1952-1973.
42. Lehane B. M., Jardine R. J., Bond A. J. and Frank R. Mechanisms of shaft friction in sand from instrumented pile tests. ASCE Journal of Geotechnical Engineering, 1993, 119, No. GT1, 19-35.
43. Mansur C. I. and Hunter A. H. Pile tests: Arkansas River project. Journal of the Soil Mechanics and Foundations Division, ASCE, 1970, 96, No. SM5, 1545-1582.
44. Coyle H. M. and Castello R. R. New design correlations for piles in sand. ASCE Journal of Geotechnical Engineering, 1981, 197, No. GT7, 965-985.
45. Lunne T. and Christofferson H. P. Interpretation of cone penetrometer data for offshore sands. Proceedings of the Offshore Technology Conference, OTC4464, Houston, 1983, 181-192.
46. Beringen F. L., Windle D. and Van Hooydonk W. R. Results of loading tests on driven piles in sand. Proceedings of a Conference on Recent Developments in the Design and Construction of Piles, London, 1979, pp. 213-225.
47. Yen T. L., Lin H., Chin C.-T. and Wang R.-F. Interpretation of instrumented driven steel pipe piles. Proceedings of a Congress on Foundation Engineering: Current Principles and Practice, Illinois, 1989, pp. 1293-1308.
48. Gurtowski T. M. and Wu M.-J. Compression load tests on concrete piles in alluvium. Proceedings of a Symposium on the Analysis and Design of Pile Foundations, San Francisco, 1984, pp. 138-153.
49. Burland J. B. and Burbidge M. C. Settlement of foundations on sand and gravel. Proceedings of the Institution of Civil Engineers, 1985, 78, No. 1, 1325-1381.
50. Meigh A. C. Cone penetration testing: methods and interpretation. CIRA Ground Engineering Report, 1987, 141 pp.
51. McCammon N. R. and Golder H. Q. Some loading tests on long pipe piles. Géotechnique, 1970, 20, No. 2, 171-184.