A SLIP-LINE FIELD FOR PLOUGHING DURING ORTHOGONAL CUTTING

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

Volumn 1997-W, Issue , 1997, Pages 37-44

  Waldorf, Daniel J ^a   DeVor, Richard E ^b   Kapoor, Shiv G ^b  

^a Quality Department ^*  (United States)

^b United States of America   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING TOOLS; GAS TURBINES; GEOMETRY;

CONDITION; CUTTING FORCES; MACHINING CONDITIONS; NORMAL MACHINING; ORTHOGONAL CUTTING; PLOWING FORCES; SHEAR ZONE; SLIPLINE FIELD; UNCUT CHIP THICKNESS; WORKPIECES MATERIALS;

CUTTING;

EID: 13644257169     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE1997-1133     Document Type: Conference Paper

References (31)

1. Albrecht, P., "New Developments in the Theory of the Metal-Cutting Process, Part 1. The Ploughing Process in Metal Cutting," Trans. ASME, J. ofEngineeringfor Industry, Nov. 1960, pp. 348-357.
2. Palmer, W.B. and R.C.K. Yeo, "Metal Flow Near the Tool Point during Orthogonal Cutting with a Blunt Tool," Proc. 4th Int. MTDR Conf., 1963, pp. 61-71.
3. Johnson, W., "Cutting with Tools having a Rounded Edge: Some Theoretical Considerations," Annals ofthe CIRP, v. 14, 1967, pp. 315-319.
4. Abdel Moneim, M.Es. and R.F. Scrutton, "Tool Edge Roundness and Stable Build-Up Formation in Finish Machining," Trans. ASME, J. ofEngineeringfor Industry,tAo'v. 1974, pp. 1258-1267.
5. Heginbotham, W.B. and S.L. Gogia, "Metal Cutting and the Built-up Nose," Proc. Inst. Meeh. Engrs., v. 175, no. 18, 1961, pp. 892-905.
6. Rubenstein, C., "The Edge Force Components in Oblique Cutting," Int J. Mach. Tools Manufact., v. 30, no. 1, 1990, pp. 141-149.
7. Zhang, H.T., Liu, P.D., and R.S. Hu, "A Three-zone Model and Solution of Shear Angle in Orthogonal Machining," Wear, v. 143, 1991, pp. 29-43.
8. Sarwar, M. and P.J. Thompson, "Cutting Action of Blunt Tools," Proc. 22nd Int MTDR Conf, 1981, pp. 295-304.
9. Parthimos, Dimitris and Kornel F. Ehmann, "A Model for the Stress Field Around the Shear Zone," Trans, ofNAMRI/SME, v. 21, 1993, pp. 197-204.
10. Wu, D. William, "Application of a Comprehensive Dynamic Cutting Force Model to Orthogonal Wave-generating Processes," IntJ. Meeh. Sei., v. 30, no. 8, 1988, pp. 581-600.
11. Endres, W.J., DeVor, R.E., and S.G. Kapoor, "A DualMechanism Approach to the Prediction of Machining Forces, Parts 1 and 2," Trans. ASME, J. of Engineering for Industry, vol. 117, November 1995, pp. 526-541.
12. Elanayar V.T., Sunil and Yung C. Shin, "Modeling of Tool Forces for Worn Tools: Flank Wear Effects," Materials Issues in Machining-II and The Physics of Machining Processes-II, Proceedings of the Winter Annual Meeting of ASME and the Fall Meeting of the Minerals, Metals, and Materials Society, 1994, pp. 341-361.
13. Elbestawi, M.A., Ismail, F., Du, R., and B.C. Ullagaddi, "Modelling Machining Dynamics Including Damping in the Tool-Workpiece Interface," Tribological Aspects in Manufacturing, ASME WAM, PED-Vol. 54/Trib-Vol. 2, 1991, pp. 253-264.
14. Sisson, T.R. and R.L. Kegg, "An Explanation of Low-Speed Chatter Effects," Trans. ASME, J. ofEngineeringfor Industry, Nov. 1969, pp. 951-958.
15. Albrecht, Paul, "Dynamics of the Metal-Cutting Process," Trans. ASME, J. ofEngineeringfor Industry, Nov. 1965, pp. 429-441.
16. Haslam, D. and C. Rubenstein, "Surface and Sub-surface Workhardening Produced by the Planing Operation," Annals ofthe CIRP, v. 18, 1970, pp. 369-381.
17. Thomsen, E.G., Lapsley, J.T. Jr., and R.C. Grassi, "Deformation Work Absorbed by the Workpiece During Metal Cutting," Trans. ASME, May 1953, pp. 591-598.
18. Usui, E., Shirakashi, T., and T. Kitagawa, "Analytical Prediction of Cutting Tool Wear," Wear, v. 100, 1984, pp. 129-151.
19. Connolly, R. and C. Rubenstein, "The Mechanics of Continuous Chip Formation in Orthogonal Cutting," Int. J. Mach. Tool Design Res.,v. 8, 1968, pp. 159-187.
20. Waldorf, D.J., DeVor, R.E., and S.G. Kapoor, "On the Phenomenon of a Stable Build-up on a Large Cutting Edge Radius," Proceedings of the ASME 1996 International Mechanical Engineering Congress and Exposition, Symposium on the Physics of Machining Processes, November 1996.
21. Black, A.J., Kopalinsky, E.M., and P.L.B. Oxley, "Asperity Deformation Models for Explaining the Mechanisms Involved in Metallic Sliding Friction and Wear - a Review," Proc. Inst. Meeh Engrs., Part C: J. ofMeeh. Eng. Science, v. 207, 1993, pp. 335-207.
22. Challen, J.M. and P.L.B. Oxley, "An Explanation of the Different Regimes of Friction and Wear using Asperity Deformation Models," Wear, v. 53, 1979, pp. 229-243.
23. Avitzur, B. and Y.D. Zhu, "A Friction Model Based on the Upper-bound Approach to the Ridge and Sublayer Deformations - Update," Proc. ISthNAMRC, 1985, pp. 103-109.
24. Abebe, Minasse and F.C. Appl, "A slip-line Solution for Negative Rake Angle Cutting," Proc. 19th NAMRC, 1981, pp. 341-348.
25. Kita, Y., Ido, M., and N. Kawasaki, "A Study of Metal Flow Ahead of Tool Face with Large Negative Rake Angle," Trans. ASME, J. ofEngineeringfor Industry, v. 104, August, 1982, pp. 319-325.
26. Shi, T. and S. Ramalingam, "Slip-line Solution for Orthogonal Cutting with a Chip Breaker and Flank Wear," Int. J. Meeh. Sei., v. 33, no. 9, 1991, pp. 689-704.
27. Dewhurst, P. and l.F. Collins, "A Matrix Technique for Constructing Slip-line Field Solutions to a Class of Plane Strain Plasticity Problems," Int. J. for Numerical Methods in Engineering, v. 7, 1973, pp. 357-378.
28. Kudo, Hideaki, "Some New Slip-line Solutions for Two-dimensional Steady-state Machining," Int J. Meeh Sci., v. 7, 1965, pp. 43-55.
29. Oxley, P.L.B., The Mechanics of Machining: An Analytical Approach to Assessing Machinability, Ellis Horwood Limited, Chichester, 1989.
30. Black, J.T., “Flow Stress Model in Metal Cutting,” Trans. ASME, J. ofEngineeringfor Industry, v. 101, November, 1979, pp. 403-415.
31. Shaw, M.C. and lain Finnic, "The Shear Stress in Metal Cutting," Trans. ASME, v. 77, 1955, p. 115.