Constitutive dependence in finite-element modelling of crack closure during fatigue

Fatigue and Fracture of Engineering Materials and Structures

Volumn 27, Issue 2, 2004, Pages 75-87

  Andersson, H ^a,b   Persson, C ^b   Hansson, T ^c   Melin, S ^b   Jarvstrat N ^c,d  

^a MAN B and W Diesel A S   (Denmark)

^b LUND UNIVERSITY   (Sweden)

^c VOLVO AERO CORPORATION   (Sweden)

^d UNIVERSITY WEST   (Sweden)

Author keywords

Bodner Partom; Crack closure; Fatigue; Finite element modelling; IN718; Material model

Indexed keywords

COMPUTER SIMULATION; CRACK PROPAGATION; CRACKS; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; KINEMATICS; MATHEMATICAL MODELS; STRAIN; STRESSES;

BODNER PARTOM VISCOPLASTIC CONSTITUTIVE MODELS; CRACK CLOSURE; CRACK OPENING STRESS; DISPLACEMENT CONTROL; LOAD CONTROL;

FRACTURE MECHANICS;

EID: 1342303542     PISSN: 8756758X     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2004.00724.x     Document Type: Article

References (25)

1. Elber, W. (1970) Fatigue crack closure under cyclic tension. Engng. Fract. Mech. 2, 37-45.
2. Christensen, R. H. (1963) Fatigue crack growth affected by metal fragments wedged between opening-closing crack surfaces. Appl. Mat. Res. 2, 207-210.
3. Pommier, S., Prioul, C., Lautridou, J. C. and Bompard, P. (1996) Crack closure effect on crack growth rate at 650°C in double notched specimens of a Nickel base superalloy. Fatigue Fract. Engng. Mater. Struct. 19, 1117-1128.
4. Andersson, H., Persson, C. and Hansson, T. (2001) Crack growth in IN718 at high temperature. Int. J. Fatigue 23, 817-827.
5. Sehitoglu, H., Gall, K. and García, A. M. (1996) Recent advances in fatigue crack modeling. Int. J. Fract. 80, 165-192.
6. Ohji, K, Ogura, K. and Ohkubo, Y. (1974) On the closure of fatigue cracks under cyclic tensile loading. Int. J. Fract. 10, 123-124.
7. Newman, J. C. Jr. and Armen, H. Jr. (1975) Elastic-plastic analysis of a propagating crack under cyclic loading. AIAA J. 13, 1017-1023.
8. McClung, R. C. (1999) Finite element analysis of fatigue crack closure: A historical and critical review. In: Fatigue '99: Proceedings of the Seventh International Fatigue Conference, vol. 1 (Edited by X. R. Wu & Z. G. Wang). Higher education press, 495-502.
9. Sehitoglu, H. and Sun, W. (1989) The significance of crack closure under high temperature fatigue crack growth with hold periods. Engng. Fract. Mech. 33, 371-388.
10. McClung, R. C. and Sehitoglu, H. (1989) On the finite element analysis of fatigue crack closure - 2. Numerical results. Engng. Fract. Mech. 33, 253-272.
11. Pommier, S. and Bompard, Ph. (2000) Bauschinger effect of alloys and plasticity-induced crack closure: A finite element analysis. Fatigue Fract. Engng. Mater. Struct. 23, 129-139.
12. Keck, J. E., Nichols, T. and Palazotti, A. N. (1985) High temperature viscoplastic fatigue behavior of a compact tension specimen. Engng. Fract. Mech. 22, 77-91.
13. Hibbit Karlsson & Sorensen, Inc. (HKS) (1998) Abaqus User's and Theory Manual, version 5.8.
14. Bodner, S. R. (1987) Review of a Unified Elastic-Viscoplastic Theory. Unified Constitutive Equations for Creep and Plasticity (Edited by A. K. Miller). Elsevier Applied Science Publishers Ltd, Essex.
15. Bodner, S. R. (1968) Constitutive Equations for Dynamic Material Behavior. Mechanical Behavior of Materials Under Dynamic Loads (Edited by U. S. Lindholm). Springer Verlag, New York, pp. 176-190.
16. Andersson, H. (2003) An implicit formulation of the bodner - Partom constitutive equations. Comput. Struct. 81, 1405-1414.
17. Moreno, V. and Jordan, E. H. (1986) Prediction of material thermomechanical response with a unified viscoplastic constitutive model. Int. J. Plasticity 2, 223-245.
18. Allison, J. E. (1988) The Measurement of Crack Closure during Fatigue Crack Growth. Fracture Mechanics: 18th Symposium, ASTM STP 945 (Edited by D. T. Read & R. P. Reed). ASTM, Philadelphia, PA, pp. 913-933.
19. Romeiro, F. F. J., Domingos, C. A. and Freitas, M. J. M. (1999) Measurement of Fatigue Crack Closure for Negative Stress Ratio. Advances in Fatigue Crack Closure Measurements and Analysis 2, ASTM STP 1342 (Edited by R. C. McClung & J. C. Newman Jr.). ASTM, Philadelphia, PA, 321-336.
20. Spence, S. H., Evans, W. J. and Medwell, N. (1977) Crack growth response of IMI 834 under variable amplitude loading. Int. J. Fatigue 19, 33-41.
21. Evans, W. J. and Spence, S. H. (1997) Characterization of crack tip and geometry induced closure. Int. J. Fatigue 19, S205-S210.
22. Dougherty, J. D., Srivatsan, T. S. and Padovan, J. (1997) Fatigue crack propagation and closure behavior of modified 1070 steel: Finite element study. Engng. Fract. Mech. 56, 189-212.
23. McClung, R. C. and Sehitoglu, H. (1989) On the finite element analysis of fatigue crack closure - 1. Basic modeling issues. Engng. Fract. Mech. 33, 237-252.
24. Andersson, M., Persson, C., Melin, S. and Hansson, T. (2002) Numerical examination of potential drop technique for crack closure measurement. In: Fatigue 2002: Proceedings of the eighth International Fatigue Conference, vol. 4 (Edited by A. F. Blom). EMAS, Stockholm, Sweden, 2301-2307.
25. Wu, J. and Ellyin, F. (1996) A study of fatigue crack closure by elastic-plastic finite element analysis for constant-amplitude loading. Int. J. Fract. 82, 43-65.