Creep rupture due to material damage by cavitation

Journal of Engineering Materials and Technology

Volumn 124, Issue 2, 2002, Pages 199-205

  Ragab, A R ^a  

^a CAIRO UNIVERSITY   (Egypt)

Author keywords

Creep; Damage; Stress Rupture; Void Growth

Indexed keywords

CAVITATION; DEFECTS; FINITE ELEMENT METHOD; GRAIN BOUNDARIES; MATHEMATICAL MODELS; STRAIN; STRENGTH OF MATERIALS; STRESSES; VOLUME FRACTION;

CREEP RUPTURE; MATERIAL DAMAGE; STRESS RUPTURE; VOID GROWTH;

CREEP;

EID: 1342277305     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1446076     Document Type: Article

References (33)

1. Hoff, N. J., 1953, "Necking and Rupture of Rods under Tensile Loads," ASME J. Appl. Mech., 20, p. 105.
2. Kachanov, L. M., 1958, "Time of the Fracture Process under Creep Conditions," (in Russian) Izv. Akad. Nauk SSSR, No. 8, p. 28.
3. Hancock, J. W., 1976, "Creep Cavitation without a Vacancy Flux," Metal Science., 10, p. 319.
4. Beere, W., and Speight, M. V., 1978, "Creep Cavitation by Vacancy Diffusion in Plastically Deforming Solid," Metal Science., 4, p. 172.
5. Boyle, J. T., and Spence, J., 1983, Stress Analysis for Creep, Butterworths.
6. Needleman, A., and Rice, J. R., 1980, "Plastic Creep Flow Effects in the Diffuse Cavitation of Grain Boundaries," Acta Metall., 28, p. 1315.
7. Cocks, A. C. K. and Ashby, M. F. 1982, "Creep Fracture by Coupled Power-Law Creep and Diffusion Under Multiaxial Stress," Metal Science, 16, p. 465.
8. Tvergaard, V., 1982, "On Localization in Ductile Materials Containing Spherical Voids," Int. J. Fract., 18, p. 237.
9. Ragah, A. R., and Saleh, Ch. A. R., 1999, "Evaluation of Constitutive Models for Voided Solids," Int. J. Plast., 15, p. 1041.
10. Bridgman, P. W., 1952, Studies in Large Plastic Flow and Fracture, McGraw-Hill, N.Y.
11. Tegart, W. J. M., 1966, Elements of Mechanical Metallurgy, Macmillan, N.Y.
12. Ragah, A. R., 2000, "Prediction of Ductile Fracture in Axisymmetric Tension by Void Coalescence," Int. J. Fract., 105, p. 391.
13. Needleman, A., 1972, "A Numerical Study of Necking in Circular Cylindrical Bars," J. Mech. Phys. Solids, 20, p. 111.
14. Norris, D. M., Moran, B., Jr., Scudder, J. K., and Quinonse, D. F., 1978, "A Computer Simulation of the Tension Test," J. Mech. Phys. Solids, 26, p. 1,
15. Ragab, A. R., and Saleh, Ch. A. R., 1999, "Effect of Void Growth on Predicting Forming Limit Strains for Planar Isotropic Sheet Metals," Mech. Mater., 32, p. 71.
16. Odqvist, F. K. G., 1966, Mathematical Theory of Creep and Creep Rupture, Oxford-Clarendon Press.
17. Wiggin Alloys Ltd, The Nimonic Alloys-Design Data.
18. Townley, C. H. A., et al., 1991, "High Temperature Design Data for Ferritic Pressure Vessel Steels," Creep of Steels Working Party (CSWP), Inst. Mech. Engrs., J. Mech. Enging., London.
19. McClintock, F. A., 1968, "A Criterion for Ductile Enlargement of Voids in Triaxial Stress Fields," ASME J. Appl. Mech., 4, p. 363.
20. Melander, A., 1983, "A New Model of The Forming Limit Diagram Applied to Experiments on Four Copper-Brass Allojs," Mater. Sci. Eng., 58, p. 63.
21. Thomson, R. D. and Hancock, J. W., 1984, "Ductile failure by Void Nucleation, Growth and Coalescence," Int. J. Fract., 26, p. 99.
22. Parmar, A., and Mellor, P. B., "Growth of Voids in Biaxial Stress Fields," Int. J. Mech. Sci., 22, p. 133.
23. Bampton, C. C., and Raj, R., 1982, "Influence of Hydrostatic Pressure and multiaxial Straining on Cavitation in Superplastic Aluminum Alloys," Acta Metall., 30, p. 2035.
24. Juvinall, R. C., 1967, Stress, Strain and Strength, McGraw-Hill, N.Y. p. 416.
25. Howard, E. B., ed., 1997, "Atlas of Creep and Stress-Rupture Curves," ASM. Ant, Metals Park, Ohio.
26. Forest, C., Monkman, F. C., and Grant, N. J., 1956, "An Empirical Relationship Between Rupture Life and Minimum Creep Rate in Creep-Rupture Tests," Proc. ASTM, Vol. 56, p. 593-620.
27. Dobes, E. and Milicka, K., 1976, "The Relation Between Minimum Creep Rate and Time to Fracture," Met. Sci., 10, p. 382.
28. Richards, E. G., 1968, "Influence of Specimen Size and Gram Size on the Creep- Rupture Strength of Some Nickle-Base High Temperature Alloys," J. Inst. Met., 98, p. 365.
29. Goldhoff, R. M, and Gill, R. F., 1972, "A Method for Predicting Creep Data for Commercial Alloys on a Correlation Between Creep Strength and Rupture Strength," ASME J. Basic Eng., 49, p. 1.
30. Moon, D. P., Simon, R. C., and Favor, R. J., 1968, "The Elevated-Temperature Properties of Selected Superalloys," ASTM, p. 335.
31. Simmons, W. K. and Cross, H. C., 1955, "Elevated-Temperature Properties of Carbon Steels," ASTM Special Technical Publication, No. 180, p. 5.
32. Hashem, A. M., 1997, "Influence of the Heat Treatment on Creep Behavior of Nickel Aluminide with Boron," Adv. Perform. Mater, 4, p. 9.
33. Data sheet from International Nickle Co., Inc., Development and Research Dept., 76 Wall St., N.Y. 10005, Undated. (See Goldhoff and Gill; 1972 [29]).