Performance of smart damping treatment using piezoelectric fiber-reinforced composites

AIAA Journal

Volumn 43, Issue 1, 2005, Pages 184-193

  Ray, M C ^a   Mallik, N ^b  

^a Department of Electrical and Computer Engineering   (United States)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

[No Author keywords available]

Indexed keywords

DAMPING; LAMINATED COMPOSITES; PIEZOELECTRIC MATERIALS; STRESS ANALYSIS; VISCOELASTICITY; VOLUME FRACTION;

ACTIVE CONSTRAINED LAYER DAMPING (ACLD); DISTRIBUTED SENSORS; LAMINATED COMPOSITE PLATES; SMART DAMPING TREATMENT;

FIBER REINFORCED MATERIALS;

EID: 12744280802     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.7552     Document Type: Article

References (38)

1. Bailey, T., and Hubbard, J. E., "Distributed Piezoelectric Polymer Active Vibration Control of a Cantilever Beam," Journal of Guidance, Control, and Dynamics, Vol. 8, No. 5, 1985, pp. 605-611.
2. Crawley, E. F., and Luis, J. D., "Use of Piezoelectric Actuators as Elements of Intelligent Structures," AIAA Journal, Vol. 25, No. 10, 1987, pp.1373-1385.
3. Baz, A., and Poh, S., "Performance of an Active Control System with Piezoelectric Actuators," Journal of Sound and Vibration, Vol. 126, No. 2, 1988, pp. 327-343.
4. Tzou, H. S., and Tseng, C. I., "Distributed Piezoelectric Sensor/Actuator Design for Dynamic Measurement/Control of Distributed Parameter Systems: A Piezoelectric Finite Element Approach," Journal of Sound and Vibration, Vol. 138, No. 1, 1990, pp. 17-34.
5. Lee, C. K., Chiang, W. W., and Sulivan, O., "Piezoelectric Modal Sensor/Actuator Pairs for Critical Active Damping Vibration Control," Journal of the Acoustical Society of America, Vol. 90, No. 1, 1991, pp. 374-384.
6. Hanagud, S., Obal, M. W., and Cause, A. J., "Optimal Vibration Control by the Use of Piezoceramic Sensors and Actuators," Journal of Guidance, Control, and Dynamics, Vol. 15, No. 5, 1992, pp. 1199-1206.
7. Devasia, S., Tesfay, M., Paden, B., and Bayo, E. A. J., "Piezoelectric Actuator Design for Vibration Suppression: Placement and Sizing," Journal of Guidance, Control, and Dynamics, Vol. 16, 1993, pp. 859-864.
8. Gu, Y., Clark, R. L., and Fuller, C. R., "Experiments on Active Control of Plate Vibration Using Piezoelectric Actuators and Polyvinylidyne Fluoride (PVDF) Modal Sensors," Journal of Vibrations and Acoustics, Vol. 116, No. 3, 1994, pp. 303-308.
9. Zhou, R. C., Lai, Z., Xue, D. Y., Huang, J. K., and Mei, C., "Suppression of Nonlinear Panel Flutter with Piezoelectric Actuators Using Finite Element Method," AIAA Journal, Vol. 33, No. 6, 1995, pp. 1098-1105.
10. Samanta, B., Ray, M. C., and Bhattacharyya, R., "Finite Element Model for Active Control of Intelligent Structures," AIAA Journal, Vol. 34, No. 9, 1996, pp. 1885-1893.
11. Baz, A., and Poh, S., "Optimal Vibration Control with Modal Positive Position Feedback," Optimal Control Applications and Methods, Vol. 17, No. 2, 1996, pp. 141-149.
12. Varadan, V. V., Kim, J., and Varadan, V. K., "Optimal Placement of Piezoelectric Actuators for Active Noise Control," AIAA Journal, Vol. 35, No. 3, 1997, pp. 526-533.
13. Ray, M. C., "Optimal Control of Laminated Plates with Piezoelectric Sensor and Actuator Layers," AIAA Journal, Vol. 36, No. 12, 1998, pp. 2204-2208.
14. l4 Agarwal, B. N., and Treanor, K. E., "Shape Control of a Beam Using Piezoelectric Actuators," Smart Materials and Structures, Vol. 8, No. 6, 1999, pp. 729-740.
15. Stöbener, U., and Gaul, L., "Modal Vibration Control for PVDF Coated Plates," Journal of Intelligent Material Systems and Structures, Vol. 11, No. 4, 2000, pp. 283-293.
16. Sun, D. C., and Tong, L., "Vibration Control of Plates Using Discretely Distributed Piezoelectric Quasi-Modal Actuators/Sensors," AIAA Journal, Vol. 39, No. 9, 2001, pp. 1766-1772.
17. Ray, M. C., "Optimal Control of Laminated Shells with Piezoelectric Sensor and Actuator Layers," AIAA Journal, Vol. 41, No. 6, 2003, pp. 1151-1157.
18. Baz, A., and Ro, J., "Optimum Design and Control of Active Constrained Layer Damping," Journal of Mechanical Design, Vol. 117B, June 1995, pp. 135-144.
19. Azvine, B., Tomlinson, G. R., and Wynne, R. J., "Use of Active Constrained Layer Damping for Controlling Resonant," Smart Materials and Structures, Vol. 4, No. 1, 1995, pp. 1-6.
20. Baz, A., and Ro, J., "Vibration Control of Plates with Active Constrained Layer Damping," Smart Materials and Structures, Vol. 5, No. 3, 1996, pp. 272-280.
21. Ray, M. C., and Baz, A., "Optimization of Energy Dissipation of Active Constrained Layer Damping Treatments of Plates," Journal of Sound and Vibrations, Vol. 208, No. 3, 1997, pp. 391-406.
22. Ray, M. C., and Baz, A., "Control of Nonlinear Vibration of Beams Using Active Constrained Layer Damping Treatment," Journal of Vibration and Control, Vol. 7, No. 4, 2001, pp. 539-549.
23. Ray, M. C., Oh, J., and Baz, A., "Active Constrained Layer Damping of Thin Cylindrical Shells," Journal of Sound and Vibration, Vol. 240, No. 5, 2001, pp. 921-935.
24. Jeung, Y. S., and Shen, I. Y., "Development of Isoparametric, Degenerate Constrained Layer Element for Plate and Shell Structures," AIAA Journal, Vol. 39, No. 10, 2001, pp. 1997-2005.
25. Chantalakhana, C., and Stanway, R., "Active Constrained Layer Damping of Clamped-Clamped Plate Vibrations," Journal of Sound and Vibration, Vol. 241, No. 5, 2001, pp. 755-777.
26. Ro, J., and Baz, A., "Optimum Placement and Control of Active Constrained Layer Damping Using Modal Strain Energy Approach," Journal of Vibration and Control, Vol. 8, No. 6, 2002, pp. 861-876.
27. Liu, Y., and Wang, K.-W., "Enhanced Active Constrained Layer Damping Treatment for Broadband Vibration Suppression," Journal of Vibration and Control, Vol. 8, No. 6, 2002, pp. 777-803.
28. Gandhi, F., and Munskey, B. E., "Comparison of Damping Augmentation Mechanisms with Position and Velocity Feedback in Active Constrained Layer Treatments," Journal of Intelligent Materials Systems and Structures, Vol. 13, No. 5, 2002, pp. 326-335.
29. Ray, M. C., and Reddy, J. N., "Optimal Control of Thin Circular Cylindrical Shells Using Active Constrained Layer Damping Treatment," Smart Materials and Structures, Vol. 13, No. 1, 2004, pp. 64-72.
30. Smith, W. A., and Auld, B. A., "Modelling 1-3 Composite Piezoelectrics: Thickness Mode Oscillations," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 38, No. 1, 1991, pp. 40-47.
31. Aboudi, J., "Micromechanical Prediction of the Effective Coefficients of Thermopiezoelectric Multiphase Composites," Journal of Intelligent Material Systems and Structures, Vol. 9, No. 9, 1998, pp. 713-722.
32. Sigmud, O., Torquato, S., and Aksay, I. A., "On the Design of 1-3 Piezo-composite Using Topology Optimization," Journal of Material Research, Vol. 13, No. 4, 1998, pp. 1038-1048.
33. Mallik, N., and Ray, M. C., "Effective Coefficients of Piezoelectric Fiber Reinforced Composites," AIAA Journal, Vol. 41, No. 4, 2003, pp. 704-710.
34. Ray, M. C., and Mallik, N., "Active Control of Laminated Composite Beams Using a Piezoelectric Fiber Reinforced Composite Layer," Smart Materials and Structures, Vol. 13, No. 1, 2004, pp. 146-152.
35. Ray, M. C., and Mallik, N., "Finite Element Solutions for Static Analysis of Smart Structures with a Layer of Piezoelectric Fiber Reinforced Composites," AIAA Journal, Vol. 42, No. 7, 2004, pp. 1398-1405.
36. Reddy, J. N., Mechanics of Laminated Composite Plates Theory and Analysis, CRC Press, Boca Raton, FL, 1996.
37. Tiersten, H. F., Linear Piezoelectric Plate Vibration, Plenum, New York, 1969.
38. Ray, M. C., "Zeroth Order Shear Deformation Theory for Laminated Composite Plates," Journal of Applied Mechanics, Vol. 70, May 2003, pp. 374-380.