Processing and properties of advanced high strength steel sheets

Canadian Metallurgical Quarterly

Volumn 43, Issue 1, 2004, Pages 1-12

  Senuma, T ^a  

^a NIPPON STEEL CORPORATION   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOTIVE INDUSTRY; CARBON DIOXIDE; CARBON STEEL; RAILROAD CARS; RECRYSTALLIZATION (METALLURGY); SEGREGATION (METALLOGRAPHY); STRENGTH OF MATERIALS; TENSILE STRENGTH;

DENT RESISTANCE; SURFACE DEFLECTION RESISTANCE;

STEEL SHEET;

EID: 1242276249     PISSN: 00084433     EISSN: None     Source Type: Journal    
DOI: 10.1179/cmq.2004.43.1.1     Document Type: Conference Paper

References (49)

1. M. Kinoshita and A. Nishimoto, CAMP-ISIJ, 1990, vol. 3, p. 1780.
2. T. Senuma, ISIJ Int., 2001, vol. 41, p. 520.
3. K. Kawasaki, T. Senuma and S. Sanagi, Proc. Int. Conf. on Processing, Microstructure and Properties of Microalloyed and Other Modern High Strength Low Alloy Steels, 1991, Pittsburgh, p. 137.
4. N. Yoshinaga, K. Ushioda, A. Itami and O. Akisue, ISIJ Int., 1994, vol. 34, p. 33.
5. B. Hutchinson, L. Ryde and D. Artymowicz, Proc. International Symp. on Modern LC and ULC Sheet Steels for Cold Forming, Aachen, 1998, Germany, p. 203.
6. S. Kaneko, A. Tosaka, T. Sakata, F. Furukaku and I. Hishinuma, Materia, 2002, vol. 41, p. 48.
7. Y. Taniguchi, K. Goto, C. Okamoto, M. Sugiyama and K. Yamazaki, Tetsu-to Hagane, 2002, vol. 88, p. 808.
8. K. Kusumi and T. Senuma, M. Suehiro, M. Sugiyama and M. Matsuo, Tetsu to Hagane, 2000, vol. 80, p.682.
9. Matsumura, Y. Sakuma and H. Takechi, Scripta Metallurgica, 1987, vol. 21, p. 1301.
10. M. Takahashi, A. Uenishi and Y. Kuriyama, Proc. of IBEC'97, Automotive Body Materials, 1997, Stuttgart, Germany, vol. 29, p. 1.
11. F. Fazeli and M. Militzer, Proc. of Int. Conf. on TRIP-aided High Strength Ferrous Alloys, 2002, Ghent, Belgium, p. 271, Wissenschaftverlag Mainz GmbH.
12. M. Takahashi, H. Yoshida and S. Hiwatashi, Proc. of Int. Conf. on TRIP-aided High Strength Ferrour Alloys, 2002, Ghent, Belgium, p. 103, Wissenschaftverlag Mainz GmbH.
13. J. Itami, M. Takahashi and K. Ushioda, Tetsu-to-Hagane, 1995. vol. 81, p. 673.
14. Kawano, J. Wakita and M. Takahashi. Tetsu-to-Hagane, 1996, vol. 82, p. 333.
15. th Int. Symp. on Automotive Technology and Automation, 1993, Aachen, Germany, p. 263.
16. T. Hiwatashi, M. Takahashi, Y. Sakuma, M. Usuda, O. Akisue, J. Itami and N. Ikenaga, CAMP-ISIJ, 1992, vol. 5, p. 1847.
17. A. Uenishi, M. Suehiro, Y. Kuriyama and M. Usuda, Proc. of IBEC'96, Interior & Safety Systems, 1996, Detroit, vol. 23, p. 89.
18. T. Kim, S. Park and Y. Kim, Materia, 1997, vol. 36, p. 502.
19. O. Graessel and G. Frommeyer, Mater. Sci. Technol., 1998, vol. 14, p. 1213.
20. S. Allain, Ch. Jean-Philippe and O. Bouaziz, Proc. of Int. Conf. on TRIP-aided High Strength Ferrous Alloys, 2002, Ghent, Belgium, p. 51, Wissenschaftverlag Mainz GmbH.
21. N. Matsuzu, A. Itami and K. Koyama, SAE Technical Paper Series 910513, 1991.
22. M. Morita, N. Kurosawa, S. Masui, T. Kato, T. Higashino and N. Aoyagi, CAMP-ISIJ, 1992, vol. 5, p. 1863.
23. K. Sato, J. Nakamichi, Y. Funakawa and T. Shiozaki, CAMP-ISIJ, 2002, vol. 15, p. 1219.
24. K. Kishida and O. Akisue, Tetsu-to-Hagane, 1990, vol. 76, p. 759.
25. K. Sugimoto, CAMP-ISIJ, 2000, vol. 13, p. 395.
26. K. Seto, Nishiyama Memorial Lectures on Progress in Metallurgy for Ultra Refinement of Grain Size, 2002, vol. 25(177,178), Tokyo and Osaka [ISIJ].
27. S. Genda, Y. Koga, S. Torizuka and K. Nagai, CAMP-ISIJ, 2000, vol. 13, p. 1187.
28. Y. Adachi, T. Tomita, S. Hinotani, Tetsu-to-Hagane, 1999, vol. 85, p. 620.
29. T. Matsukura, S. Nanba, M. Nomura and K. Makii, Proc. JSME Annual Meeting, 2000, p. 473.
30. M. Fujioka, Y. Abe and Y. Hagiwara, CAMP-ISIJ, 2000, vol. 13, p. 1136.
31. H. Yada, Y. Matsumura and T. Senuma, Proc. of "Thermec 88", 1988, vol. 200, [ISIJ].
32. Y. Matsumura and H. Yada, Trans. ISIJ, 1987, vol. 27, p. 492.
33. I. Takeshi, T. Kurahashi and K. Morimoto, Forum on Microstructural Formation of Ultra-fine Grain Steels and Their Deformation Mechanisms, 2002, Tokyo, p. 20, ISIJ.
34. T. Hanamura, T. Yamashita, O. Umezawa, S. Torizuka and K. Nagai, CAMP-ISIJ, 2001, vol. 14, p. 1051.
35. S. Aihara, Nishiyama Memorial Lectures on Progress in Metallurgy for Ultra Refinement of Grain Size, 2002, Tokyo and Osaka, [ISIJ], vol. 151(177,178).
36. st Century, 2000, Karuizawa, Japan, p. 67.
37. K. Yamazaki, Y. Mizuyama and T. Oka, CAMP-ISIJ, 1992, vol. 5, p. 1839.
38. D.Cornette, H. Hourman, O. Hudin, J.P Laurent and A. Reynaert, SAE Tech Ser, SAE Paper # 2001-01-0078, 2001, p. 19.
39. Proc. of New Development of Studies on Delayed Fracture, 1997, Tokyo, ISIJ.
40. K. Yamazaki and Y. Mizuyama, Tetsu-to-Hagane, 1997, vol. 83, p. 754.
41. S. Matsuyama, Tetsu-to-Hagane, 1994, vol. 80, p. 679.
42. S. Yamasaki and T. Takahashi, Tetsu-to-Hagane, 1997, vol. 83, p. 454.
43. T. Tarui and S. Yamazaki, Tetsu-to-Hagane, 2002, vol. 42, p. 612.
44. Y. Saito, M. Saeki, M. Nishida, Y. Ito, T. Tanaka and S. Takizawa, Proc. of Int. Conf. on Steel Rolling, 1980, ISIJ, Tokyo, p. 1300.
45. K. Esaka, J. Wakita, M. Takahashi, O. Kawano and S. Harada, Seitetsu Kenkyu, 1986, vol. 321, p. 92.
46. M. Suehiro, K. Sato, Y. Tsukano, H. Yada, T. Senuma and Y. Matsumura, Trans. ISIJ, 1987, vol. 27, p. 439.
47. J. K. Brimacombe, E. B. Hawbolt, I. V. Samarasekera, P. C. Campbell and C. Devadas, Proc. Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, 1988, ISIJ, Tokyo, p. 783.
48. P. Choquet, P. Fabregue, J. Giusti, B. Chamont, J. N. Pezant and F. Blanchet, Proc. Int. Conf. on Mathematical Modelling of Hot Rolling of Steels, 1990, CIMM, Hamilton, p. 34.
49. P. D. Hodgson and R. K. Gibbs, Proc. Int. Conf. on Mathematical Modelling of Hot Rolling of Steels, 1990, CIMM, Hamilton, p. 76.