Vibration power flow: A critical review

Shock and Vibration Digest

Volumn 37, Issue 1, 2005, Pages 3-11

  Mandal, Nirmal K ^a   Biswas, S ^b  

^a CENTRAL QUEENSLAND UNIVERSITY   (Australia)

^b UNIVERSITY OF WOLLONGONG   (Australia)

Author keywords

Far field conditions; Flexural ware; In plane ware; Structural intensity

Indexed keywords

ACCELERATION; ELASTIC WAVES; FINITE ELEMENT METHOD; FOURIER TRANSFORMS; NUMERICAL ANALYSIS; POISSON RATIO; STRUCTURAL ANALYSIS; TIME DOMAIN ANALYSIS;

FAR-FIELD CONDITIONS; FLEXURAL WARES; IN-PLANE WARES; STRUCTURAL INTENSITY (SI);

VIBRATION MEASUREMENT;

EID: 12344296425     PISSN: 05831024     EISSN: None     Source Type: Journal    
DOI: 10.1177/0583102404049168     Document Type: Review

References (94)

1. Ahmida, K. M. and Arruda, J. R. F., 2000, "Spectral Element-Based Prediction of Active Power Flow in Timoshenko Beams," International Journal of Solid and Structures, Vol. 38, 1669-1679.
2. Alves, P. S. and Arruda, J. R. F., 2001, "Active and Reactive Power Flow Estimation Using Mindlin Plate Theory," in Proceedings of the IX DINAME, Florianopolis, Brazil, 1-6.
3. Arruda, J. R. F. and Campos, J. P., 1996, "Experimental Determination of Flexural Power Flow in Beams Using a Modified Prony Method," Journal of Sound and Vibration, Vol. 197, No. 3, 309-328.
4. Arruda, J. R. F. and Mas, P., 1998, "Localizing Energy Sources and Sinks in Plates Using Power Flow Maps Computed from Laser Vibrometer Measurements," Shock and Vibration, Vol. 5, 235-253.
5. Bandat, J. S. and Piersol, A. G., 1986, Random Data: Analysis and Measurement Procedures, 2nd Ed., Wiley, New York.
6. Bauman, P. D., 1994, "Analytical and Experimental Evaluation of Various Techniques for the Case of Flexural Waves in One-Dimensional Structures," Journal of Sound and Vibration, Vol. 14, No. 5, 677-694.
7. Belov, V. D., Ryloak, S. A., and Tartakovski, B. D., 1977, "Propagation of Vibration Energy in Absorbing Structures," Soviet Physics - Acoustics. Vol. 23, No. 2, 115-119.
8. Bercin, A. N., 1996, "An Assessment of the Effects of In-Plane Vibrations on the Energy Flow between Couples Plates," Journal of Sound and Vibration, Vol. 191, No. 5, 661-680.
9. Berthelot, Y. H., Yang, M., and Jarzynski, J., 1993, "Recent Progress on Laser Doppler Measurement in Structural Acoustics," in Proceedings of the 4th International Congress on Intensity Technique, Senlis, France, 199-206.
10. Blotter, J. D. and West, R. L., 1995a, "On the Convergence of Experimental Spatially Continuous Power Flow Vector Fields," Proceedings of Inter-Noise 95, 605-608.
11. Blotter, J. D. and West, R. L., 1995b, "Identification of Energy Sources and Sinks to Enhance Noise Control in Plates," Proceedings of Inter-Noise 95, 609-614.
12. Blotter, J. D. and West, R. L., 1996, "Identification of Energy Sources and Sinks in Plates by Means of a Scanner Laser Doppler Vibrometer," Noise Control Engineering Journal, Vol. 44, No. 2, 61-68.
13. Bokelberg, E. H., Sommer, H. J. III, and Trethewey, M. W., 1994a, "A Six-Degrees-of-Freedom Laser Vibrometer, Part I: Theoretical Development," Journal of Sound and Vibration, Vol. 178, No. 5, 643-654.
14. Bokelberg, E. H., Sommer, H. J. III, and Trethewey, M. W., 1994b, "A Six-Degrees-of-Freedom Laser Vibrometer, Part II: Experimental Validation," Journal of Sound and Vibration, Vol. 178, No. 5, 655-667.
15. Boutcher, O. M. and Bernhard, R. J., 1992, "Models of Space-Averaged Energies of Plates," American Institute of Aeronautics and Astronautics Journal, Vol. 30, 616-623.
16. Boutcher, O. M. and Bernhard, R. J., 1995a, "Simple Models of the Energy Flow in Vibrating Members," Journal of Sound and Vibration, Vol. 182, 129-147.
17. Boutcher, O. M. and Bernhard, R. J., 1995b, "Simple Models of the Energetics in Transversely Vibrating Plates," Journal of Sound and Vibration, Vol. 182, 149-164.
18. Briscoe, A. R. and Pinnington, R. J., 1996, "Axisymmetric Vibration Power Measurement in Empty and Fluid Filled Pipes," Journal of Sound and Vibration, Vol. 192, 771-791.
19. Chae, K. S. and Ih, J. G., 2001, "Prediction of Vibrational Energy Distribution in the Thin Plate at High-Frequency Bands by Using the Ray Tracing Method," Journal of Sound and Vibration, Vol. 240, No. 2, 263-292.
20. Craik, R. J. M. and Thancanamootoo, A., 1992, "Applications of the Dynamic Stiffness Method to the Free and Forced Vibrations in Aircraft Structures," Applied Acoustics, Vol. 37, No. 2, 85-109.
21. Cremer, L. and Heckl, M., 1988, Structure-Borne Sound: Structural Vibration and Sound Radiation at Audio Frequencies, Springer-Verlag, Berlin.
22. Cuschieri, J. M. and McCollum, M. D., 1996, "In-Plane and Out-of-Plane Waves Power Transmission Through an L-Type Junction Using Mobility Power Flow Approach," Journal of the Acoustical Society of America, Vol. 100, No. 2, 857-870.
23. Fahy, F. J., 1994, "Statistical Energy Analysis: A Critical Overview," Philosophical Transactions of the Royal Society, Vol. 346, 431-447
24. Fahy, F. J. and Pierri, R., 1997, "Application of Cross-Spectral Density to a Measurement of Vibration Power Flow Between Connected Plates, " Journal of the Acoustical Society of America, Vol. 62, No. 5, 1297-1298.
25. Flugge, W., 1973, Stresses in Shells, 2nd Ed., Springer-Verlag, Berlin.
26. Freschi, A. A., Pereira, A. K. A., Ahmida, K. M., Frejlich, J., and Arruda, J. R. F., 2000, "Analyzing the Total Structural Intensity in Beams Using a Homodyne Laser Doppler Vibrometer," Shock and Vibration, Vol. 7, 299-308.
27. Gavric, L. and Pavic, G., 1990, "Computation of Structural Intensity in Beam-Plate Structures by Numerical Modal Analysis using FEM," in Proceedings of the 3rd International Congress on Intensity Technique, Senlis, France.
28. Gavric, L. and Pavic, G., 1993, "A Finite Element Method for Computation of Structural Intensity by the Normal Mode Approach," Journal of Sound and Vibration, Vol. 164, No. I, 29-43.
29. Gibbs, B. M. and Craven, P. G., 1981, "Sound Transmission and Mode Coupling at Junctions of Thin Plates. Part II: Parametric Survey," Journal of Sound and Vibration, Vol. 77, 429-435.
30. Gibbs, B. M. and Gilford, C. L. S., 1976, "The Use of Power Flow Methods for the Assessment of Sound Transmission in Buildings Structures," Journal of Sound and Vibration, Vol. 49, 267-286.
31. Hambric, S. A., 1990, "Power Flow and Mechanical Intensity Calculations in Structural Finite Element Analysis," Journal of Vibration and Acoustics, Vol. 112, 542-549.
32. Hambric, S. A., 1995, "Comparison of Finite Element Prediction and Experimental Measurements of Structure-Borne Powers in a T-Shaped Beam," Proceedings of Inter-Noise 95, 685-688.
33. Hambric, S. A. and Taylor, P. D., 1994, "Comparison of Experimental and Finite Element Structural-Borne Flexural Power Measurements for Straight Beams," Journal of Sound and Vibration, Vol. 170, No. 5. 595-605.
34. Huebner, K. H., Thornton, E. A., and Byrom, T. G., 1995, The Finite Element Method for Engineers, 3rd Ed., Wiley, New York.
35. Ichchou, M. N., Bot, A. L., and Jezequel, L., 1997, "Energy Model of One-Dimensional Multipropagative Systems," Journal of Sound and Vibration, Vol. 201, No. 5, 535-554.
36. Kay, K. Q. and Swanson, D. C., 1996, "Error in Bending Wave Power Measurements Resulting from Longitudinal Waves," Noise Control Engineering Journal, Vol. 44, No. 4, 185-192.
37. Kim, H. S., Kang, H. J., and Kim, J. S., 1994a, "A Vibration Analysis of Plates at High Frequencies by the Power Flow Method," Journal of Sound and Vibration, Vol. 174, No. 4, 493-504.
38. Kim, H. S., Kang, H. J., and Kim, J. S., 1994b, "Transmission of Bending Waves in Interconnected Rectangular Plates," Journal of the Acoustical Society of America, Vol. 47, No. 1, 238-247.
39. Kim, H. S., Kang, H. J., and Kim, J. S., 1994c, "A Vibration Analysis at High Frequencies by the Power Flow Method," Journal of Sound and Vibration, Vol. 174, 493-505.
40. Landmann, A. E., Tillema, H. F., and Marshall, S. E. 1989, Evaluation of Analysis Techniques for Low-Frequency Interior Noise and Vibration of Commercial Aircraft, N ASA-CR-181851.
41. Langley, R. S., 1989, "A General Deviation of the Statistical Energy Analysis Equations for Couple Dynamic Systems," Journal of Sound and Vibration. Vol. 135, 499-508.
42. Langley, R. S., 1991, "Analysis of Beam and Plate Vibrations by Using the Wave Equation," Journal of Sound and Vibration, Vol. 150, 47-65.
43. Langley, R. S., 1995, "On the Vibrational Conductivity Approach to High-Frequency Dynamics for Two-Dimensional Structural Components," Journal of Sound and Vibration, Vol. 182, 637-657.
44. Langley, R. S., Smith, R. D., and Fahy, F. J., 1997, "Statistical Energy Analysis of Periodically Stiffened Damped Plate Structures," Journal of Sound and Vibration. Vol. 208, No. 3. 407-426.
45. Lase, Y., Ichchou, M. N., and Jezequel, L., 1996, "Energy Flow Analysis of Bars and Beams: Theoretical Formulation," Journal of Sound and Vibration, Vol. 192, No. 1, 281-305.
46. Linjama, J., 1992, "Structural Intensity Measurements Using Two Laser Vibrometers," Proceedings of Inter-Noise 92, 541-544.
47. Linjama, J. and Lahti, T., 1992a, "Estimation of Bending Wave Intensity in Beams Using the Frequency Response Technique," Journal of Sound and Vibration, Vol. 153, No. 1, 21-36.
48. Linjama, J. and Lahti, T., 1992b, "Experiments of Structural Intensity Measurements Using the One-Transducer Frequency Response Method, " Proceedings of Inter-Noise 88, 595-598.
49. Lyon, R. H., 1975, Statistical Energy Analysis of Dynamic System: Theory and Application, MIT Press, Cambridge, MA.
50. Lyon, R. H., 1986, "In-Plane Contribution to Structural Noise Transmission," Noise Control Engineering Journal, Vol. 26, 22-27.
51. McDevitt, T. E., Koopmann, G. H., and Burroughs, C. B., 1993, "Two-Channel Laser Vibrometer Techniques for Vibration Intensity Measurements, Part 1: Flexural Intensity," Journal of Vibration and Acoustics, Vol. 115, 436-440.
52. Mandal, N. K., Leong, M. S., and Rahman, R. A., 2000, "Measurement of Quasi-Longitudinal Wave Power in Thin Single-Layer Naturally Orthotropic Plates," International Journal of Acoustics and Vibration. Vol. 5, No. 2, 106-108.
53. Mandal, N. K., Rahman, R. A., and Leong, M. S., 2002, "Prediction of Structure-Borne Sound in Orthotropic Plates for Far-Field Conditions," Journal of Vibration and Control, Vol. 8, No. 1, 3-12.
54. Mandal, N. K., Rahman, R. A., and Leong, M. S., 2003, "Structure-Borne Power Transmission in Thin Naturally Orthotropic Plates: General Case," Journal of Vibration and Control, Vol. 9, No. 10, 1189-1199.
55. Maynard, J. D., Williams, E. G., and Lee. Y., 1985, "Near-Field Acoustic Holography: I. Theory of Generalized Holography and Development of NAH," Journal of the Acoustical Society of America, Vol. 78, 1395-1413.
56. Meyer, B., Silvestre, J. M., and Thomasson, D., 1988, "Detection of Vibration Sources in Cylinders by Structural Intensity Method," Proceeding of Inter-Noise 88, 575-578.
57. Ming, R. S., Pan, J., and Norton, M. P., 2001, "The Measurement of Structure-Borne Sound Energy Flow in an Elastic Cylindrical Shell," Journal of Sound and Vibration, Vol. 242, No. 4, 719-735.
58. Moorhouse, A. T., 1988a, "Determination of Propagation Path of Structure-Borne Sound," Proceedings of the Institute of Acoustics, Vol. 10, Part 2, 759-766.
59. Moorhouse, A. T., 1988b, "Prediction of Structure-Borne Sound Power Injection into Building Structures by Resiliency Mounted Machinery," Proceedings of Inter-Noise 88, 493-496.
60. Morikawa, R., Naramura, K., and Ueha S., 1995, "Structural Intensity Derivation Using Normal and In-Plane Vibration Displacements Measured by a Laser Doppler Vibrometer," Proceedings of Inter-Noise 95, 673-640.
61. Nakamura, K. and Ueha, S., 1995, "Structural Intensity Measurement by an Optical Fiber Array Probe," Proceedings of Inter-Noise 95, 641-646.
62. Nefske, D. J. and Sung, S. H., 1987, "Power Flow Infinite Element Analysis of Dynamic Systems: Basic Theory and Application to Beams," Statistical Energy Analysis, NCA, Vol. 3, 47-54.
63. Nefske, D. J. and Sung, S. H., 1989, "Power Flow Infinite Element Analysis of Dynamic System: Basic Theory and Application to Beams," Transactions of ASME, Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. III, 94-100.
64. Nejade, A. and Singh, R., 2002, "Flexural Intensity Measurement on Finite Plates Using Modal Spectrum Ideal Filtering," Journal of Sound and Vibration, Vol. 256, No. 1, 33-63.
65. Nilsson, A. C., 1977, "Attenuation of Structure-Borne Sound in Superstructures in Ships," Journal of Sound and Vibration, Vol. 55, 71-91.
66. Noiseux, D. U., 1970, "Measurement of Power Flow in Uniform Beams and Plates," Journal of the Acoustical Society of America, Vol. 47, No. 1, 238-247.
67. Park, D. H., Hong, S. Y., Kil, H. G., and Jeon, J. J., 2001, "Power Flow Models and Analysis of In-Plane Waves in Finite Couples Thin Plates," Journal of Sound and Vibration, Vol. 244, No. 4, 651-668.
68. Pascal, J. C., Loyau, T., and Mann, J. A. III. 1990, "Structural Intensity From Spatial Fourier Transform and BAHIM Acoustic Holography Method," in Proceedings of the 3rd International Congress on Intensity Technique, Senlis, France, 197-204.
69. Pascal, J. C., Carniel, X., Chalvidan, V., and Smigielski, P., 1993a, "Determination of Structural Intensity and Mechanical Excitation Using Holographic Interferometry," in Proceedings of the 4th International Congress on Intensity Technique, Senlis, France, 137-144.
70. Pascal, J. C., Loyau, T., and Carniel, X., 1993b, "Complete Determination of Structural Intensity in Plates Using Laser Vibrometers," Journal of Sound and Vibration, Vol. 161, No. 3, 527-531.
71. Pavic, G., 1976, "Measurement of Structure-Borne Wave Intensity, Part I: Formulation of the Methods," Journal of Sound and Vibration, Vol. 49, No. 2, 221-230.
72. Pavic, G., 1985, "Structural Surface Intensity: A Novel Approach in Vibration Analysis and Diagnostics," in Proceedings of the 2nd International Congress on Acoustic Intensity, CETIM, Senlis, France, 219-226.
73. Pavic, G., 1987, "Structural Surface Intensity: An Alternative Approach in Vibration Analysis and Diagnosis," Journal of Sound and Vibration, Vol. 115, No. 3, 405-422.
74. Pavic, G., 1990, "Vibrational Energy Flow in Elastic Circular Cylindrical Shells," Journal of Sound and Vibration, Vol. 142, 293-310.
75. Pavic, G., 1995, "Measurement of Structure-Borne Intensity: Wave-Decomposition vs Direct Approach," Proceedings of Inter-Noise 95, 653-656.
76. Romano, A. J. and Williams, E. G., 1993, "On the Use of Acoustic Holography for the Determination of Intensity of Structures," in Proceedings of the 4th International Congress on Intensity Technique, Senlis, France, 13-34.
77. Rook, T. K. and Singh, R., 1996, "Mobility Analysis of Structure-Borne Noise Power Row Through Bearings in Gearbox-Like Structures," Noise Control Engineering Journal, Vol. 44, No. 2, 69-78.
78. Sato, K. and Honda, I., 1988, "Application of Vibration Power Measurement to the Piping System in an Air-Conditioner," Proceedings of Inter-Noise 88, 591-594.
79. Seo, S. H., Hong, S. Y., and Kil, H. G., 2003, "Power Flow Analysis of Reinforced Beam-Plate Coupled Structures," Journal of Sound and Vibration, Vol. 259, No. 5, 1109-1129.
80. Shibata, K., Kato, M., Takatsu, N., Wakatsuki, O., and Kobayashi, K., 1994, "Measuring Condition and Precision of Structural Intensity Measurement," Proceedings of Inter-Noise 94, 1697-1700.
81. Steel, J. A. and Craik, R. J. M., 1994, "Statistical Energy Analysis of Structure-Borne Sound Transmitted by Finite Element Method," Journal of Sound and Vibration, Vol. 178, No. 4, 553-561.
82. Troitskey, M. S., 1976, Stiffened Plates: Bending, Stability and Vibration, Elsevier, Amsterdam.
83. Troshin, A. G. and Popkov, V. I., 1993, "Measurement of Vibration Power Flow in Rod Structures by Using Piezoelectric Film Sensors," in Proceedings of the 4th International Congress on Intensity Technique, Senlis, France, 169-174.
84. Verheij, J. W., 1980, "Cross-Spectral Density Methods for Measuring Structure-Borne Power Flow on Beams and Pipes," Journal of Sound and Vibration, Vol. 70, No. 1, 133-138.
85. Walsh, S. J. and White, R. G., 1993, "Prediction of Vibration Power Transmission in Curved Beams," Proceedings of Noise-93, Vol. 2, 61-68.
86. Walsh, S. J. and White, R. G., 2000, "Vibrational Power Transmission in Curved Beams," Journal of Sound and Vibration, Vol. 233, 455-488.
87. Walsh, S. J. and White, R. G., 2001, "Measurement of Vibrational Power Transmission in Curved Beams," Journal of Sound and Vibration, Vol. 241, No. 2, 157-183.
88. Wester, E. C. N. and Mace, B. R., 1996, "Statistical Energy Analysis of Two Edge-Coupled Rectangular Plates: Ensemble Averages," Journal of Sound and Vibration, Vol. 193, 793-822.
89. White, W. R., 1983, "The Experimental Measurement of Flexural Wave Power Flow in Structures," in Proceedings of the 2nd International Conference on Recent Advanced in Dynamics, ISVR, Southampton, UK, 467-474.
90. Wholever, J. C. and Bernhard, R. J., 1992, "Mechanical Energy Flow Models in Rods and Beams," Journal of Sound and Vibration, Vol. 153, 1-19.
91. Williams, E. G. and Dardy, H. G., 1985a, "Near-Field Acoustic Holography Using an Underwater-Automated Scanner," Journal of the Acoustical Society of America, Vol. 78, 789-798.
92. Williams, E. G. and Dardy, H. D., 1985b, "SIMPA, Structural Intensity From the Measurement of Acoustic Pressure," in Proceedings of the 2nd International Congress on Intensity Technique, Senlis, France, 235-242.
93. Williams, E. G., Dardy, H. D., and Fink, R. G., 1985, "A Technique for Measurement of Structure-Borne Intensity in Plates," Journal of the Acoustical Society of America, Vol. 78, 2061-2968.
94. Zhang, Y. and Mann, J. A. III, 1996, "Example of Using Structural Intensity and the Force Distribution to Study Vibrating Plates," Journal of the Acoustical Society of America, Vol. 99, No. 1, 354-361.