Design and simulation in innovative practice

Journal of Architectural and Planning Research

Volumn 21, Issue 4, 2004, Pages 273-291

  Axley, James W ^a  

^a YALE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DESIGN; ENGINEERING; INNOVATION; TECHNOLOGICAL DEVELOPMENT;

EID: 12144258008     PISSN: 07380895     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (82)

1. Alexander DK, Jenkins HG, Jones PJ (1997) Investigating the effects of wind on natural ventilation design of commercial buildings. In Sustainable building: A BEPAC - EPSRC conference. Abingdon, England: BEPAC, pp. 141-148.
2. Allard F (1998) Natural ventilation in buildings: A design handbook London: James & James (Science Publishers) Ltd.
3. Atelier-Ten (1999) 10 - Atelier-Ten. London: Atelier-Ten.
4. Augenbroe G (2002) Trends in building simulation. Building and Environment 37(8-9):891-902.
5. Axley JW (1989) Multi-zone dispersal analysis by element assembly. Building and Environment 24(2):113-130.
6. Axley JW (1998) Introduction to the design of natural ventilation systems using loop equations. In Ventilation technologies in urban areas - 19th AIVC conference. Oslo, Norway: AIVC, pp. 47-56.
7. Axley JW (1999a) Natural ventilation design using loop equations. In GJ Raw, CE Aizlewood, and PR Warren (Eds.), Indoor air '99: Proceedings of the 8th international conference on indoor air quality and climate Edinburgh: ISIAQ and AIVC.
8. Axley JW (1999b) Passive ventilation for residential air quality control. ASHRAE Transactions 105(2):864-876.
9. Axley JW (2002) Innovative practice case studies - Blueprints for research, practice and education in the building technologies. La Rochelle, France: LEPTAB, Université de La Rochelle.
10. Axley JW, Grot R (1990) Coupled airflow and thermal analysis for building system simulation by element assembly techniques. In Room Vent '90: Engineering aero- and thermodynamics of ventilated rooms - 2nd international conference. Oslo: Norwegian Association of Heating, Ventilating and Sanitary Engineers (NORSK VVS).
11. Barnard N (1996) Review of low energy cooling technologies: IEA annex 28. IEA: Energy conservation in buildings and community systems program. NEWS 23(May): 1-5.
12. Barnard N, Jaunzens D (Eds.) (1999) Early design guidance for low energy cooling technologies: 1EA annex 28, Subtask 2, Report 2. London: British Research Establishment (BRE).
13. Bathe KJ, Wilson EL (1976) Numerical methods infinite element analysis. Englewood Cliffs, NJ: Prentice Hall, Inc.
14. Bellew P (2000) Labyrinth thermal storage systems. In 6th international intelligent building design symposium. Stuttgart, Germany: Messe-Sauber.
15. Braham GD (2000) Comparative performance of U.K. fabric energy storage systems. ASHRAE Transactions 106(1).
16. BRE (1999) NatVent - A better way to work: Overcoming barriers to natural ventilation, CD-ROM. London: BRE.
17. Bring A (1992) IDA SOLVER: User's documentation. Stockholm, Sweden: KTH (Royal Institute of Technology), Department of Building Services Engineering.
18. British Research Establishment Conservation Support Unit (BRECSU) (2000) Energy consumption guide 19: Energy use in offices. Watford, U.K.: BRECSU, p. 23.
19. Chartered Institution of Building Services Engineers (CIBSE) (1998) Natural ventilation in non-domestic buildings: A guide for designers, developers and owners. London: CIBSE.
20. COMSOL, Inc. (2001) FEMLAB reference manual. Burlington, MA: COMSOL, Inc..
21. de Wilde P, Augenbroe G, van der Voorden M (2002) Design analysis integration: Supporting the selection of energy saving building components. Building and Environment 37(8-9):807-816.
22. Dols WS, Walton GN, Denton KR (2000) CONTAMW 1.0 user manual: Multi-zone airflow and contaminant transport analysis software. Gaithersburg, MD: U.S. NIST.
23. Dorsey J, et al. (1995) Rendering spaces for architectural environments. Presence 4(3):286-296.
24. Dorsey J, Monks M, Oh BM (2000) Audioptimization: Goal-based acoustic design. IEEE Computer Graphics and Applications 20(3):76-91.
25. Edwards RE, Irwin C (1988) Further studies of passive ventilation systems - Assessment of design and performance criteria. In M Liddament (Ed.), Effective ventilation - 9th AIVC conference. Gent, Belgium: AIVC.
26. Fisk WJ (1998) Improved productivity and health from better indoor environments: Estimates of potential national benefits. Berkeley, CA: Lawrence Berkeley Laboratory.
27. Fitzgerald E, et al. (1999) A green Vitruvius - Principles and practice of sustainable architectural design. London: James & James (Science Publishers) Ltd.
28. Fordham M (2000) Natural ventilation. Renewable Energy 19:17-37.
29. Gage SA (1997) Stack ventilation and cooling for urban sites: Natural ventilation with roof intakes for improved air quality. In M Liddament (Ed.), Ventilation and cooling - 18th AIVC conference. Athens, Greece: AIVC, pp. 87-97.
30. Gaze AI (1986) Passive ventilation: A method of controllable natural ventilation of housing. London: TRADA.
31. Harriman LG (1999) New weather data for energy calculations. ASHRAE Journal March:31-38.
32. Hayter SJ, et al. (2001) The energy design process for designing and constructing high-performance buildings. In GML Giudice and M Constantino (Eds.), CLIMA 2000: 7th REHVA world congress - Indoor environment technology: Towards a global approach. Naples: Italian Association of Air Conditioning, Heating and Refrigerating Engineers (AICARR).
33. Heiselberg P (2000) Design principles for natural and hybrid ventilation. In O Seppänen and J Säteri (Eds.), Healthy building 2000. Espoo: SIT Indoor Air Information Oy, Helsinki, Finland, pp. 35-45.
34. Heiselberg P (2002) Principles of hybrid ventilation: IEA annex 35, Report and CD. Birmingham, U.K.: ECBCS.
35. Hensen IJ (1999) A comparison of coupled and decoupled solutions for temperature and airflow in a building. ASHRAE Transactions 105(2).
36. Hestad T, Skaret E, Brunsell JT (1999) Heat recovery in natural ventilation design of office buildings London: BRE.
37. Irving S, Uys E (1997) CIBSE applications manual: Natural ventilation in non-domestic buildings. London: CIBSE.
38. Jaboyedoff P, Löhnert G (2001) Guidelines on integrated design process descriptions and explanations on design process navigation system: IEA task 23, Subtask B. www.task23.com. Site accessed 2003.
39. Klein SA (2002) E.E.S. - Engineering equation solver. Madison, WI: F-Chart Software.
40. Knoll B, Kornaat W (1991) Controlled natural ventilation. In M Liddament (Ed.), Air movement and ventilation control within buildings - 12th AIVC conference. Ottawa, Canada: AIVC, pp. 193-218.
41. Kolsaker K (1991) An NMF-based component library for fire simulation. In JA Clarke, JW Mitchell, and RC Vand de Parre (Eds.), Building simulation. Nice, France: International Building Performance Simulation Association (IBPSA), pp. 328-335.
42. Kronvall J, Svensson C, Adalberth K (1998) Practical guidelines for integrated natural ventilation design. NatVent - A better way to work Watford, U.K.: BRE.
43. Kronvall J, Svensson C, Adalberth K (1999) Practical guidelines for integrated natural ventilation design. NatVent - A better way to work Watford, U.K.: BRE.
44. Li Y (2002a) Spurious numerical solutions in coupled natural ventilation and thermal analysis. International Journal of Ventilation 1(1): 1- 12.
45. Li Y (2002b) "Catastrophic" shift and multiple stable equilibria in smoke flow in building fires. Unpublished draft, The University of Hong Kong, Hong Kong.
46. Li Y, et al. (2001) Some examples of solution multiplicity in natural ventilation. Building and Environment 36:851-888.
47. Liem SH, van Paassen AHC (1997) Hardware and controls for natural ventilation cooling. In M Liddament (Ed.), Ventilation and cooling - 18th AIVC conference. Athens, Greece: AIVC, pp. 59-68.
48. Lindgren M, Sahlin P (1992) IDA modeller: A user's and programmer's guide. Göteborg: Swedish Institute of Applied Mathematics.
49. Marion W, Urban K (1995) User's manual for TMY2's - Typical meteorological years. Golden, CO: National Renewable Energy Laboratory (NREL).
50. Martin A, Fitzsimmons J (2000) Guidance note GN 7/2000: Making natural ventilation systems work. Bershire, U.K.: The Building Services Research and Information Association (BSRIA).
51. MathWorks (2000) MATLAB - The language of technical computing: Using MATLAB version 6. Natick, MA: The MathWorks.
52. MathWorks (2002) SIMULINK - Model-based and system-based design: Using SIMULINK version 5. Natick, MA: The MathWorks.
53. Meek JL (1971) Matrix structural analysis. New York: McGraw-Hill.
54. Mora L, Wurtz E, Axley JW (2002) Prediction of indoor environmental quality in multi-zone buildings using zonal models. In AK Melikov and PV Nielsen (Eds.), RoomVent 2002: Air distribution in rooms - 8th international conference. Copenhagen, Denmark.
55. Musy M, et al. (2002) Automatically generated zonal models for building air flow simulation: Principles and applications. Building and Environment 37(8-9):873-881.
56. Nitta K (1999) Variety modes and chaos in smoke ventilation by ceiling chamber system. In Building simulation '99 - 6th international IBPSA conference. Kyoto, Japan: IBPSA, pp. 473-480.
57. NREL, LBNL, BSG (2002) BSG: Energy10. Washington, D.C.: Sustainable Building Industries Council (SBIC).
58. Olesen BW (2000) European standardization regarding heating systems in buildings. In GML Giudice and M Constantino (Eds.), CLIMA 2000: 7th REHVA world congress - Indoor environment technology: Towards a global approach. Naples: Italian Association of Air Conditioning, Heating and Refrigerating Engineers (AICARR).
59. Orme M (1999) AIVC technical note 51: Applicable models for air infiltration and ventilation calculations. Coventry: AIVC.
60. Parkins L (1994) Case studies of passive stack ventilation systems in occupied dwellings. In M Liddament (Ed.), The role of ventilation - 15th AIVC conference. Buxton, U.K.: AIVC, pp. 25-34.
61. Petherbridge P, Millbank NO, Harrington-Lynn J (1988) Environmental design manual: Summer conditions in naturally-ventilated offices. Garston, U.K.: BRE.
62. Rittle H (1972) On the planning crisis: System analysis of the " first and second generations." Bedriftsokonomen 8:390-396.
63. Rowe PG (1987) Design thinking. Cambridge: MIT Press.
64. Rowell D, Wormley DN (1990) System dynamics: An introduction - Course notes for 2.02 introduction to systems dynamics. Cambridge: MIT Press.
65. Sahlin P (1993) IDA modeller: A man-model interface for building simulation. Stockholm: Swedish Institute of Applied Mathematics and Department of Building Services Engineering, Royal Institute of Technology.
66. Sahlin P, Bring A (1993) The IDA multi-zone air exchange application Stockholm: Swedish Institute of Applied Mathematics and Department of Building Services Engineering, Royal Institute of Technology.
67. Semenenko P (1993) Passive stack ventilation: A review of ventilation needs and passive stack ventilation. In CLIMA 2000: 5th world congress. London: CIBSE.
68. Simmonds P (1994) Experiences with naturally ventilated atria. ASHRAE Transactions 100(1).
69. Sirén K, et al. (1997) Solar assisted natural ventilation with heat pipe heat recovery. In M Liddament (Ed.), Ventilation and cooling - 18th AIVC conference. Athens, Greece: AIVC, pp. 323-329.
70. Skaaret E, Blom P, Brunsell JT (1997) Energy recovery possibilities in natural ventilation of office buildings. In M Liddament (Ed.), Ventilation and cooling - 18th AIVC conference. Athens, Greece: AIVC, pp. 312-321.
71. Skopek J (1999) BREEAM strategy for reducing buildings' environmental impact. ASHRAE Transactions 105(2).
72. Sowell EF, Haves P (1999) Numerical performance of the SPARK graph-theoretic simulation program. Unpublished report, Lawrence Berkeley National Laboratory, Berkeley, California.
73. Stephen RK, Parkins LM, Woolliscroft M (1994) Passive stack ventilation systems: Design and installation. Watford, U.K.: BRE.
74. Svensson C, Aggerholm S (1997) A design tool for natural ventilation. In M Liddament (Ed.), Ventilation and cooling - 18th AIVC conference. Athens, Greece: AIVC, pp. 163-174.
75. van Cruchten GE, et al. (2000) Examples of integrated design - Five low-energy buildings created through integrated design. Arnhem, The Netherlands: IEA Solar Heating and Cooling Task 23.
76. van Paassen DHC, Stec W (2000) Controlled double facades and HVAC. In GML Giudice and M Constantino (Eds.), CLIMA 2000: 7th REHVA world congress - Indoor environment technology: Towards a global approach. Naples: Italian Association of Air Conditioning, Heating and Refrigerating Engineers (AICARR).
77. Vuolle M, Sahlin P (2000) IDA Indoor climate and energy -Anew-generation simulation tool. In O Seppänen and J Säteri (Eds.), Healthy building 2000. Espoo: SIT Indoor Air Information Oy, Helsinki, Finland.
78. Willman AJ (1991) Looking at the relationship between IAQ and energy costs. Indoor Air Review November: 1072.
79. Wouters P, et al. (2001) TIP- Vent: Towards improved performance of mechanical ventilation systems. Brussels, Belgium: TIP-Vent (TM) Partners.
80. Wurtz E, Nataf J-M, Winkelmann F (1999) Two- and three-dimensional natural and mixed convection simulation using modular zonal models in buildings. International Journal of Heat and Mass Transfer 42:923-940.
81. Wurtz E, et al. (2000) A thermal and airflow analysis tool using simplified models based on the zonal method. In GML Giudice and M Constantino (Eds.), CLIMA 2000: 71h REHVA world congress - Indoor environment technology: Towards a global approach. Naples: Italian Association of Air Conditioning, Heating and Refrigerating Engineers (AICARR).
82. Zimmermann M, Andersson J (1998) Annex 28 low energy cooling - Case study buildings. Duebendorf, Switzerland: International Energy Agency.