Comparisons between thermal modeling and experiments: Effects of substrate preheating

Rapid Prototyping Journal

Volumn 10, Issue 1, 2004, Pages 24-34

  Dai, K ^a   Li, X X ^a   Shaw, L L ^a  

^a UNIVERSITY OF CONNECTICUT   (United States)

Author keywords

Lasers; Thermal conductivity; Thermal output; Thermal testing

Indexed keywords

COMPUTER AIDED DESIGN; CRACKS; DENSIFICATION; FINITE ELEMENT METHOD; LASER APPLICATIONS; LAYERED MANUFACTURING; NATURAL CONVECTION; POROSITY; SUBSTRATES;

THERMAL MODELING; THERMAL OUTPUT; THERMAL TESTING;

THERMAL CONDUCTIVITY;

EID: 1142301872     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552540410512507     Document Type: Conference Paper

References (39)

1. Amon, C.H., Beuth, J.L., Merz, R., Prinz, F.B. and Weiss, L.E. (1998), "Shape deposition manufacturing with microcasting: processing, thermal and mechanical issues", J. Manufact. Sci. Eng., Vol. 120 No. 3, pp. 656-65.
2. ANSYS Inc. (2002), ANSYS On-line Reference Manuals: The ANSYS Elements Reference, Release 6.1, ANSYS Inc., Canonsburg, PA.
3. Beaman, J.J., Barlow, J.W., Bourell, D.L., Crawford, R.H., Marcus, H.L. and McAlea, K.P. (1997), Solid Freeform Fabrication: A New Direction in Manufacturing, Kluwer Academic Publishers, Boston, MA.
4. Chin, R.K., Beuth, J.L. and Amon, C.H. (1996), "Thermomechanical modeling of molten metal droplet solidification applied to layered manufacturing", Mech. Mater., Vol. 24, pp. 257-71.
5. Chin, R.K., Beuth, J.L. and Amon, C.H. (2001 a), "Successive deposition of metals in solid freeform fabrication processes Part 1: thermomechanical models of layers and droplet columns", Journal of Manufacturing Science and Engineering, Vol. 123 No. 4, pp. 623-31.
6. Chin, R.K., Beuth, J.L. and Amon, C.H. (2001b), "Successive deposition of metals in solid freeform fabrication processes Part 2: thermomechanical models of adjacent droplets", Journal of Manufacturing Science and Engineering, Vol. 123 No. 4, pp. 632-8.
7. Dai, K. and Shaw, L. (2001), "Thermal and stress modeling of multi-material laser processing", Acta Mater., Vol. 49, pp. 4171-81.
8. Dai, K. and Shaw, L. (2002a), "Distortion minimization of laser-processed components through control of laser scanning patterns", Rapid Prototyping Journal, Vol. 8 No. 5, pp. 270-6.
9. Dai, K. and Shaw, L. (2002b), "Preheating effects on multiple materials laser densification", in Bourell, D.L. et al. (Eds), Proceedings of the 13th Annual SFF Symposium, The University of Texas at Austin, pp. 392-9.
10. Dai, K. and Shaw, L. (2002c), "Finite element analysis of distortion minimization in layer-by-layer laser-processed components", in Marquis, F.D.S. and Bourell, D.L. (Eds), Rapid Prototyping of Materials, TMS, The Minerals, Metals and Materials Society, Warrendale, PA, pp. 29-39.
11. Dai, K. and Shaw, L. (2003a), "Finite element modeling for laser-assisted dental restoration process", in Reddy, R.G. (Ed.), Proceedings of the 2003 NSF Design, Service and Manufacturing Grantees and Research Conference, Birmingham, AL, pp. 2292-300.
12. Dai, K. and Shaw, L. (2003b), "The size effect on stresses and distortion of laser processed multi-material components", Metall. Mater. Trans. A, Vol. 34A, pp. 1133-45.
13. Dai, K. and Shaw, L. (2003c), "Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders", Acta Mater. (in press).
14. Dai, K., Crocker, J.E., Shaw, L. and Marcus, H.L. (2003), "Modeling of selective area laser deposition (SALD) and SALD vapor infiltration of silicon carbide", Rapid Prototyping Journal, Vol. 9 No. 4, pp. 231-9.
15. Li, X-X. and Shaw, L. (2003), "Phase transformation and microstructure of dental porcelain powder in laser-assisted rapid prototyping processes", Submitted to Dental Mater.
16. Li, X., Shaw, L., Marcus, H. and Cameron, T. (2002), "Laser densification of porcelains for rapid prototyping of dental restorations", Proc. of the 2002 NSF Design, Manufacturing and Industrial Innovation Research Conference, San Juan, Puerto Rico, pp. 1786-9.
17. Li, X-X., Wang, J-W., Augustine, A., Shaw, L., Marcus, H.L. and Cameron, T.B. (2001), "Microstructure evaluation for multi-materials laser densification of dental porcelains", in Bourell, D.L. et al. (Eds), Proceedings of the 12th Annual SFF Symposium, The University of Texas at Austin, pp. 195-202.
18. Mackert, J.R., Butts, M.B., Morena, R. and Fairhurst, C.W. (1986), "Phase changes in a leucite-containing dental porcelain frit", J. Am. Ceram. Soc., Vol. 69 No. 4, pp. C-69-C-72.
19. Matsumoto, M., Shiomi, M., Osakada, K. and Abe (2002), "Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing", Int. J. Machine Tools and Manufacture, Vol. 42, pp. 61-7.
20. Mazumder, J. and Kar, A. (1995), Theory and Application of Laser Chemical Vapor Deposition, Plenum Publishing Co., New York, NY.
21. Nickel, A.H., Barnett, D.M. and Prinz, F.B. (2001), "Thermal stresses and deposition patterns in layered manufacturing", Materials Science and Engineering A, Vol. 317, pp. 59-64.
22. Niebling, F. and Otto, A. (2001), "FE-simulation of the selective laser sintering process of metallic powders", in Geiger, M. and Otto, A. (Eds), Proceedings of 3rd International Conference on Laser Assisted Net Shaping (LANE2001), Meisenbach Verlag, Germany, pp. 371-82.
23. Ong, R., Beuth, J.L. and Weiss, L.E. (2000), "Residual stress control issues for thermal deposition of polymers in SFF processes", in Bourell, D.L. et al. (Eds), Proceedings of the 11th Annual SFF Symposium, The University of Texas at Austin, pp. 209-18.
24. Poirier, D.R. and Geiger, G.H. (1994), Transport Phenomena in Materials Processing, The Minerals, Metals and Materials Society, Warrendale, PA.
25. Schlunder, E.U. (1983), Heat Exchanger Design Handbook, Hemisphere Publishing Corporation, New York, NY.
26. Schneider, S.J. (1991), Engineered Materials Handbook, Vol. 4: Ceramics and Glasses, ASM International, Metals Park, OH.
27. Serway, R. (1982), Physics: For Scientists and Engineers, Saunders College Publishing, Philadelphia, Pennsylvania.
28. Shaw, L., Li, X-X., Wang, J-W., Marcus, H.L., Cameron, T.B. and Kennedy, C. (2002), "Dental restoration through laser densification of dental porcelain powder", in Marquis, F.D.S. and Bourell, D.L. (Eds), Rapid Prototyping of Materials, TMS, Warrendale, PA, pp. 107-18.
29. Shiomi, M., Matsumoto, M., Osakada, K. and Abe, F. (2001), "Two-dimensional finite element simulation of laser rapid prototyping, simulation of materials processing: theory, methods and applications", in Mori, K. (Ed.), Proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes - NUMIFORM 2001, Toyohashi, Japan, A.A. Balkema Publishers, The Netherlands, pp. 1059-64.
30. Sih, S.S. and Barlow, J.W. (1994), "Measurement and prediction of the thermal conductivity of powders at high temperature", in Marcus, H.L. et al. (Eds), Proceedings of the 5th Annual SFF Symposium, The University of Texas at Austin, pp. 321-9.
31. Sih, S.S. and Barlow, J.W. (1995a), "Emissivity of powder beds", in Marcus, H.L. et al. (Eds), Proceedings of the 6th Annual SFF Symposium, The University of Texas at Austin, pp. 402-8.
32. Sih, S.S. and Barlow, J.W. (1995b), "The prediction of the thermal conductivity of powders", in Marcus, H.L. et al. (Eds), Proceedings of the 6th Annual SFF Symposium, The University of Texas at Austin, pp. 397-401.
33. Touloukian, Y.S. and Buyco, E.H. (1970), Thermophysical Properties of Matter, Specific Heat: Nonmetallic Solids, IFI/Plenum, New York, NY, Vol. 5.
34. Touloukian, Y.S. and DeWitt, D.P. (1972), Thermophysical Properties of Matter, Thermal Radiative Properties: Nonmetallic Solids, Vol. 8, IFI/Plenum, New York, NY.
35. Touloukian, Y.S., Powell, R.W., Ho, C.Y. and Klemens, P.G. (1970), Thermophysical Properties of Matter, Thermal Conductivity, Nonmetallic Solids: IFI/Plenum, New York, NY, Vol. 2.
36. Vasinonta, A., Beuth, J.L. and Griffith, M.L. (2001a), "A process map for consistent build conditions in the solid freeform fabrication of thin-walled structures", Journal of Manufacturing Science and Engineering, Vol. 123 No. 4, pp. 615-22.
37. Vasinonta, A., Beuth, J.L. and Ong, R. (2001b), "Melt pool size control in thin-walled and bulky parts via process maps", in Bourell, D.L. et al. (Eds), Proceedings of the 12th Annual SFF Symposium, The University of Texas at Austin, pp. 432-40.
38. Wang, J-W., Li, X-X., Shaw, L., Marcus, H.L., Cameron, T.B. and Kennedy, C. (2002), "Studies on slurry extrusion for dental restoration", in Bourell, D.L. et al. (Eds), Proceedings of the 13th Annual SFF Symposium, The University of Texas at Austin, pp. 83-91.
39. Zhang, Y.W., (1998), "Thermal modeling of advanced manufacturing technologies: grinding, laser drilling, and solid freeform fabrication", PhD thesis, University of Connecticut.