Case History: Internally Coated Completion Workstring Successes

Proceedings - SPE Annual Technical Conference and Exhibition

Volumn , Issue , 2002, Pages 3005-3012

  Pourciau, Robert D ^a  

^a ChevronTexaco Explor Prod Company

Author keywords

[No Author keywords available]

Indexed keywords

CORROSIVE EFFECTS; OIL FIELDS; OIL WELL DRILLING; PLASTIC COATINGS; PRESSURE EFFECTS; TENSILE STRENGTH; TUBING; WEAR RESISTANCE; WELL PERFORATION;

DEEPWATER OPERATIONS; TUBING CONVEYED PERFORATE (TCP);

OIL WELL COMPLETION;

EID: 1142266608     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2118/77687-ms     Document Type: Conference Paper

References (20)

1. API RP 7G Fifteenth Edition, January 1, 1995, "Recommended Practice for Drill Stem Design and Operating Limits", Tables 4 and 5, API, Washington, D.C.
2. ASTM D 4060-81: "Abrasion Resistance of Organic Coatings by the Taber Abraser" ASTM, Philadelphia, PA.
3. NACE Standard TM03 84-94 : Holiday Detection of Internal Tubular Coatings of Less Than 250 urn (10 mils) Dry Film Thickness, NACE International, Houston, TX.
4. Campbell, C.A. III: "Effects Of Holidays Or Mechanical Damage On Internally Plastic Coated Tubulars," Corrosion/79 Paper 257, NACE International, Houston, TX.
5. Roberson, G.R.: "Comparison of Corrosion Rates: Wireline-Cut Plastic Coated Oil Well Tubing vs. Wireline-Cut Bare Tubing," Materials Performance, Vol. 13, No. 12, pp. 26-28, presented as part of a panel discussion at a meeting of T-1G at Corrosion/74, NACE International, Houston, TX
6. Davis, R.H.: "The Use Of Internal Plastic Coatings To Mitigate CO2 Corrosion In Downhole Tubulars," Corrosion/94 Paper 23, NACE International, Houston, TX.
7. Wolfe, L.H. et al.: "Laboratory Testing Of In-Service Performance Parameters Of Internal Pipe Coatings," Corrosion/92 Paper 333, NACE International, Houston, TX.
8. Byars, H.G.: "Corrosion Control In Petroleum Production," TPC Publication 5, Second Edition, NACE International, Houston, TX.
9. Roberson, G.R.: "Materials Performance" 13, 12 (1974): p.26.
10. Coulter, G.R.: "The Advantages of High Proppant Concentration in Fracture Stimulation" paper SPE 3298, June, 1972
11. Nasr-El-Din, H.A. et al.: "Lessons Learned from Acid Pickle Treatments of Deep/Sour Gas Wells," paper SPE 73706 presented at the 2002 SPE International Symposium and Exhibition on Formation Damage Control held in Lafayette, LA., 20-21 February
12. Ali, S.A. and Shelby, D.C.: "Guidelines for Rig-Site Removal of Iron Contamination from Completion Brines", February 1999, Petroleum Engineer International
13. NACE Standard RP0291-91: Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories, Section 7: Operation, NACE International, Houston, TX.
14. Thompson, I. et al.: "Evaluation Of Coating For The Protection Of Downhole Production Tubing," Corrosion/97 Paper 66, NACE International, Houston, TX.
15. Nelson, J.M.: "New Advancements in the Use of Internal Plastic Coating for Enhanced Oil Recovery," Materials Performance, Vol. 30, No. 12, pp. 27-30, 1991, NACE International, Houston, TX
16. Lewis, R.E. and Barbin, D.K.: "Selecting Internal Coatings For Sweet Oil Well Tubing Service," Corrosion/99 Paper 15, NACE International, Houston, TX.
17. Lewis, R.E. and Barbin, D.K.: "Selecting Internal Coatings For Gas Well Tubulars," Corrosion/97 Paper 70, NACE International, Houston, TX.
18. ASTM D 2794-82: "Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)" ASTM, Philadelphia, PA.
19. Wells, K.R.: "The Reduction of Coated Tubing Failures in the Dickinson Heath Sand Unit, North Dakota," paper SPE 17525 presented at the 1988 SPE Rocky Mountain Regional Meeting held in Casper, WY., 11-13 May
20. P.E. Moseley and Associates, Inc., "The Well Evaluation Model - WEM For Windows"Houston, TX.