Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy

Journal of Materials Research

Volumn 19, Issue 11, 2004, Pages 3329-3342

  Charit, I ^a   Mishra, R S ^a  

^a MISSOURI UNIVERSITY OF SCIENCE AND TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DUCTILITY; GRAIN BOUNDARIES; GRAIN SIZE AND SHAPE; METALLOGRAPHIC MICROSTRUCTURE; OPTIMIZATION; PLASTIC DEFORMATION; STRAIN RATE; SUPERPLASTICITY; TENSILE TESTING;

FRICTION STIR PROCESSING; GRAIN REFINEMENT;

ALUMINUM ALLOYS;

EID: 11244316487     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/JMR.2004.0429     Document Type: Article

References (71)

1. A.J. Barnes: Superplastic aluminum forming - expanding its techno-economic niche. Mater. Sci. Forum 304-306, 785 (1999).
2. H. Imamura and N. Ridley: In Superplasticity in Advanced Materials edited by S. Hori, M. Tokizane, and N. Furoshiro (JSRS Symp. Proc., Tokyo, Japan, 1991), p. 453.
3. R. Verma, A.K. Ghosh, S. Kim, and C. Kim: Grain refinement and superplasticity in 5083 Al. Mater. Sci. Eng. A 191, 143 (1995).
4. J. Pimenoff, Y. Yagodzinskyy, J. Romu, and H. Hanninen: Effects of the temperature of warm rolling on the superplastic behavior of AA5083 aluminium base alloy. Mater. Sci. Forum 357-359, 277 (2001 ).
5. M.T. Perez-Prado, G. Gonzalez-Doncel, O.A. Ruano, and T.R. McNelley: Texture analysis of the transition from slip to grain boundary sliding in a discontinuously recrystallized superplastic aluminum alloy. Acta Mater. 49, 2259 (2001).
6. I.C. Hsiao and J.C. Huang: Deformation mechanisms during low- and high-temperature superplasticity in 5083 Al-Mg alloy. Metall. Mater. Trans. 33A, 1373 (2002).
7. H. Iwasaki, H. Hosokawa, T. Mori, T. Tagata, and K. Higashi: Quantitative assessment of superplastic deformation behavior in a commercial 5083 alloy. Mater. Sci. Eng. A 252, 199 (1999).
8. L. Dupuy, J.J. Blandin, and E.F. Ranch: Structural and mechanical properties in AA 5083 processed by ECAE. Mater. Sci. Technol. 16, 1256 (2000).
9. J.W. Sinclair, K.T. Hartwig, Jr., R.E. Goforth, E.A. Kenik, and E. Voelkl: In Ultrafine Grained Materials, edited by R.S. Mishra, S.L. Semiatin, C. Suryanarayana, N.N. Thadhani, and T.C. Lowe (TMS, Warrendale, PA, 2000), p. 393.
10. D.R. Herling and M.T. Smith: In Ultrafine Grained Materials, edited by R.S. Mishra, S.L. Semiatin, C. Suryanarayana, N.N. Thadhani, and T.C. Lowe (TMS, Warrendale, PA, 2000), p. 411.
11. K.T. Park, D.Y. Hwang, S.Y. Chang, and D.H. Shin: Low-temperature superplastic behavior of a submicrometer-grained 5083 Al alloy fabricated by severe plastic deformation. Metall. Mater. Trans. 33A, 2859 (2002).
12. N. Tsuji, K. Shiotsuki, and Y. Saito: Superplasticity of ultra-fline grained Al-Mg alloy produced by accumulative roll-bonding. Mater. Trans. (JIM) 40, 765 (1999).
13. H. Watanabe, K. Ohori, and Y. Takeuchi: Superplastic behavior of Al-Mg-Cu alloys. Trans. Iron Steel Inst., Japan. 27, 730 (1987).
14. F. Li, D.H. Bae, and A.K. Ghosh: Grain elongation and anisotropic grain growth during superplastic deformation in an Al-Mg-Mn-Cu alloy. Acta Mater. 45, 3887 (1997).
15. K. Kannan, C.H. Johnson, and C.H. Hamilton: A study of superplasticity in a modified 5083 Al-Mg-Mn alloy. Metall. Mater. Trans. 29A, 1211 (1998).
16. J.S. Vetrano, C.H. Henager, Jr., and S.M. Bruemmer: In Superplasticity and Superplastic Forming, edited by A.K. Ghosh and T.R. Bieler (TMS, Warrendale, PA, 1998), p. 89.
17. C.H. Henager, Jr., J.S. Vetrano, V.Y. Gertsman, and S.M. Bruemmer: In Superplasticity - Curent Status and Future Potential, edited by P.B. Berbon, M.Z. Berbon, T. Sakuma, and T.G. Langdon (Mater. Res. Soc. Symp. Proc. 601, Warrendale, PA, 2000), p. 31.
18. R.O. Kaibyshev and F.F. Musin: Subsolidus superplasticity. Doklady Physics 45, 324 (2000).
19. T. Chanda, A.K. Ghosh, and C. Lavender: In Superplasticity and Superplastic Forming, edited by A.K. Ghosh and T.R. Bieler (TMS, Warrendale, PA, 1995), p. 49.
20. K. Higashi, S. Tanimura, and T. Ito: In Superplasticity in Metals, Ceramics, and Intermetallics, edited by M.J. Mayo, M. Kobayashi, and J. Wadsworth (Mater. Res. Soc. Proc. 196, Pittsburgh, PA, 1990), p. 385.
21. R. Grimes, R.J. Dashwood, A.W. Harrison, and H.M. Flower: Development of a high strain rate superplastic Al-Mg-Zr alloy. Mater. Sci. Technol. 16, 1334 (2000).
22. K.T. Park, D.H. Hwang, Y.K. Lee, Y.K. Kim, and D.H. Shin: High strain rate superplasticity of submicrometer grained 5083 Al alloy containing scandium fabricated by severe plastic deformation. Mater. Sci. Eng. A 341, 273 (2003).
23. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: "Friction Stir Butt Welding." G.B. Application No. 9125978.8, Dec. 1991; U.S. Patent No. 5460317, Oct. 1995.
24. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: High strain rate superplasticity in a friction stir processed 7075 Al alloy. Scripta Mater. 42, 163 (2000).
25. R.S. Mishra and M.W. Mahoney: Friction stir processing: A new grain refinement technique to achieve high strain rate superplas ticity in commercial alloys. Mater. Sci. Forum 357-359, 507 (2001).
26. I. Charit and R.S. Mishra: High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing. Mater. Sci. Eng. A 359, 290 (2003).
27. Z.Y. Ma, R.S. Mishra, and M.W. Mahoney: Superplastic deformation behavior of friction stir processed 7075Al alloy. Acta Mater. 50, 4419 (2002).
28. Z.Y. Ma, R.S. Mishra, M.W. Mahoney, and R. Grimes: High strain rate superplasticity in friction stir processed Al-Mg-Zr alloy. Mater. Sci. Eng. A 351, 148 (2003).
29. I. Charit and R.S. Mishra: In Ultrafine Grained Materials III, edited by Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin, and T.C. Lowe (TMS, Warrendale, PA, 2004), p. 95.
30. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps (Pergamon Press, London, U.K., 1985), p. 21.
31. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomenon (Pergamon Press, London, U.K., 2002), p. 128.
32. J.C. Williams and E.A. Starke, Jr.: In Deformation, Processing and Structure, edited by G. Krauss (ASM, Metals Park, OH, 1982) p. 279.
33. M. Matsuo: In Superplasticity: 60 years after Pearson, edited by N. Ridley (Maney Publisher, London, U.K., 1995), p. 277.
34. F.J. Humphreys, P.B. Prangnell, J.R. Bowen, A. Gholinia, and C. Harris: Developing stable fine grain microstructures by large strain deformation. Phil. Trans. A (Royal Society) 357, 1663 (1999).
35. Y.S. Sato, S.H.C. Park, and H. Kokawa: Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys. Metall. Mater. Trans. 32A, 3033 (2001).
36. M. Peel, A. Steuwer, M. Preuss, P.J. Withers: Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Mater. 51, 4791 (2003).
37. O. Frigaard, O. Grong, and O.T. Midling: A process model for friction stir welding of age hardening aluminium alloys. Metall. Mater. Trans. 32A, 1189 (2001).
38. M. Karlsen, O. Frigaard, H. Hjelen, O. Grong, and H. Norum: SEM-EBSD - characterisation of the deformation microstructure in friction stir welded 2024 T351 aluminium alloy. Mater. Sci. Forum 426-432, 2861 (2003).
39. K.V. Jata and S.L. Semiatin: Continuous dynamic recrystallisation during friction stir welding of high strength aluminium alloys. Scripta Mater. 43, 743 (2000).
40. J.Q. Su, T. W. Nelson, R. Mishra, and M. Mahoney: Microstructural investigation of friction stir welded 7050-T651 aluminium. Acta Mater. 51, 713 (2003).
41. B. Heinz and B. Skrotzki: Characterisation of a friction-stir-welded aluminium alloy 6013. Metall. Mater. Trans. 33B, 489 (2002 ).
42. F. Li: Microstructural evolution and mechanisms of superplasticity in an Al-4.5% Mg alloy. Mater. Sci. Technol. 13, 17 (1997).
43. H.J. McQueen: In Materials in Automotive Industry, edited by E. Essadiai, F.E. Goodwin, and M. Elboujdaini, (Canadian Metal Society, Toronto, Canada, 2001), p. 279.
44. E.M. Taleff: In Creep Behavior of Advanced Materials for the 21st Century, edited by R.S. Mishra, A.K. Mukherjee, and K.L. Murty (TMS, Warrendale, PA, 1999), p. 349.
45. I. Charit, R.S. Mishra, and M.W. Mahoney: Multi-sheet structures in 7475 aluminum by friction stir welding in concert with post-weld superplastic forming. Scripta Mater. 47, 631 (2002).
46. R.S. Mishra, R.K. Islamgaliev, T.W. Nelson, Y. Hovansky, and M.W. Mahoney: In Friction Stir Welding and Processing, edited by K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and D.P. Field (TMS, Warrendale, PA, 2001), p. 205.
47. I. Charit, Z.Y. Ma, and R.S. Mishra: In Hot Deformation of Aluminum Alloys III, edited by Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishnan (TMS, Warrendale, PA, 2003), p. 331.
48. F.J. Humphreys: A unified theory of recovery, recrystallisation and grain growth, based on the stability and growth of cellular microstructures. Acta Mater. 45, 5031 (1997).
49. V. Randle and A. Brown: The effects of strain on grain misorientation texture during the grain growth incubation Period. Philos. Mag. A 58, 717 (1988).
50. C. Antonione, F. Marino, G. Riontino, and M.C. Tabasso: Effect of slight deformations on grain growth in iron. J. Mater. Sci. 12, 747 (1977).
51. J.B. Koo, D.H. Yoon, and M.F. Henry: The effect of small deformation on abnormal grain growth in bulk Cu. Metall. Mater. Trans. 33A, 3803 (2002).
52. M. Mahoney, R.S. Mishra, T. Nelson, J. Flintoff, R. Islamgaliev, and Y. Hovansky: In Friction Stir Welding and Processing, edited by K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and D.P. Field (TMS, Warrendale, PA, 2001), p. 183.
53. O.D. Sherby and J. Wadsworth: Superplasticity- recent advances and future directions. Prog. Mater. Sci. 33, 169 (1989).
54. T. Watanabe: Key issues of grain boundary engineering for superplasticity. Mater. Sci. Forum 243-245, 21 (1997).
55. T.R. McNelley, M.E. McMohan, and S.J. Hales. An EBSP investigation of alternate microstructures for superplasticity in aluminum-magnesium alloys. Scripta Mater. 36, 369 (1997).
56. T. Hirata, T. Osa, H. Hosokawa, and K. Higashi: Effects of flow stress and grain size on the evolution of grain boundary microstructure in superplastic 5083 aluminum alloy. Mater. Trans. (JIM) 43, 2385 (2002).
57. M. Otsuka, S. Shibasaki, and M. Kikuchi: Superplasticity in coarse grained Al-Mg alloys. Mater. Sci. Forum 233-234, 193 (1997 ).
58. E.M. Taleff and J. Qiao: In Light Metals 2001, edited by M. Sahoo and T.J. Lewis. (Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada, 2001), p. 77.
59. R.S. Mishra, T.R. Bieler, and A.K. Mukherjee: Superplasticity in powder-metallurgy alumunum-alloys and composites. Acta Metall. Mater. 43, 877 (1995).
60. M.A. Kulas, P.E. Krajewski, T. McNelley, and E.M. Taleff: In Hot Deformation of Aluminum Alloys III, edited by Z. Jin, A. Beaudoin, T.R. Bieler, and B. Radhakrishnan (TMS, Warrendale, PA, 2003), p. 499.
61. H. Iwasaki, R. Kariya, M. Mabuchi, T. Tagata, and K. Higashi: Effects of flow stress and grain size on the evolution of grain boundary microstructure in superplastic 5083 aluminum alloy. Mater. Trans. (JIM) 42, 1771 (2001).
62. W.J. Kim: Role of subgrain formation in high strain rate superplasticity of Al-Mg alloy. Mater. Sci. Forum 304-306, 273 (1999).
63. H. Oikawa: In Creep and Fracture of Engineering Materials and Structures, edited by B. Wilshire and R.W. Evans (The Institute of Metals, London, 1987), p. 99.
64. T.R. Bieler and A.K. Mukherjee: The high strain rate superplastic deformation mechanisms of mechanically alloyed aluminum IN90211. Mater. Sci. Eng. A 128, 171 (1990).
65. J. Weertman and J.R. Weertman: In Constitutive Relations and Their Physical Basis, edited by S.I. Andersen, J.B. Slide-Sorensen, N. Hansen, T. Leffers, H. Lilholt, O.B. Pederson, and B. Ralph (RISO National Laboratory, Roskilde, Denmark, 1987), p. 191.
66. N. Ridley and Z.C. Wang: Cavitation in superplastic materials. Mater. Sci. Forum 170-172, 177 (1994).
67. E.M. Taleff, D.R. Leuser, C.K. Syn, and G.A. Henshall: In Recent Advances in Fracture, edited by R.K. Mahidhara, A.B. Geltmacher, P. Matic, and K. Sadananda (TMS, Warrendale, PA, 1997), p. 295.
68. Z.Y. Ma and R.S. Mishra: Cavitation in superplastic 7075Al alloys prepared via friction stir processing. Acta Mater. 51, 3551 (2003).
69. J.W. Hancock: Creep cavitation without a vacancy flux. Met. Sci. 10, 319 (1976).
70. A.C.F. Cocks and M.F. Ashby: Creep fracture by coupled power-law creep and diffusion under multiaxial stress. Met. Sci. 16, 465 (1982).
71. M.J. Stowell: Cavity growth in superplastic alloys. Met. Sci. 14, 267 (1980).