Effects of inclination angle of ribs on the flow behavior in rectangular ducts

Journal of Fluids Engineering, Transactions of the ASME

Volumn 126, Issue 4, 2004, Pages 692-699

  Gao, Xiufang ^a,b   Sund́en, Bengt ^a  

^a LUND INSTITUTE OF TECHNOLOGY   (Sweden)

^b Siemens Industrial Turbines   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

FLOW OF FLUIDS; GAS TURBINES; HEAT TRANSFER; PRESSURE DROP; REYNOLDS NUMBER; VELOCITY MEASUREMENT;

FLOW STRUCTURES; INCLINATION ANGLE; RECTANGULAR DUCTS; SECONDARY FLOW;

DUCTS;

EID: 11144343199     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1778715     Document Type: Conference Paper

References (33)

1. Olsson, C. O., and Sundén, B., 1998, "Experimental Study of Flow and Heat Transfer in Rib-Roughened Rectangular Channels," Exp. Therm. Fluid Sci., 16(4), pp. 349-365.
2. Sundén, B., 1999, "Enhancement of Convective Heat Transfer in Rib-Roughened Rectangular Ducts," I. Enhanced Heat Transfer, 6, pp. 89-103.
3. Gao, X., and Sundén, B., 2001, "Heat Transfer and Pressure Drop Measurements in Rib-Roughened Rectangular Ducts," Exp. Therm. Fluid Sci., 24, pp. 25-34.
4. Taslim, M. E., 2001, "Experimental Heat Transfer in Stationary RibRoughened Rectangular Channels," in Heat Transfer in Gas Turbines (eds., B. Sundén and M. Faghri), pp. 291-405, WIT Press, Southampton, UK.
5. Saidi, A., and Sundén, B., 1998, "Calculation of Convective Heat Transfer in Square-Sectioned Gas Turbine Blade Cooling Channels," ASME paper 98-GT-204.
6. Abdon, A., 2001, "Numerical Simulations of Cooling Concepts Related to Gas Turbine Combustors," Ph.D. thesis, Division of Heat Transfer, Lund Institute of Technology.
7. Han, J. C., Dutta, S. D., and Ekkad, S. E., 2000, "Gas Turbine Heat Transfer and Cooling Technology," Taylor & Francis, New York, USA.
8. Taslim, M. E., and Wadsworth, C. M., 1997, "An Experimental Investigation of the Rib Surface-Averaged Heat Transfer Coefficient in a Rib-Roughened Square Passage," ASME J. Turbomach., 119(2), pp. 381-389.
9. Kilicaslan, I., and Ibrahim Sarac, H., 1998, "Enhancement of Heat Transfer in Compact Heat Exchanger by Different Type of Rib With Holographic Interferometry," Exp. Therm. Fluid Sci., 17, pp. 339-346.
10. Ahn, S. W., 2001, "The Effects of Roughness Types on Friction Factors and Heat Transfer in Roughened Rectangular Duct," Int. Commun. Heat Mass Transfer, 28(7), pp. 933-942.
11. Iacovides, H., Jackson, D. C., Kelemenis, G., and Launder, B. E., 2000, "The Measurement of Local Wall Heat Transfer in Stationary U-Ducts of Strong Curvature With Smooth and Rib-Roughened Walls," ASME J. Turbomach., 122(2), pp. 386-392.
12. Ekkad, S. V., and Han, J. C., 1997, "Detailed Heat Transfer Distributions in Two-Pass Square Channels With Rib Tabulators," Int. J. Heat Mass Transfer, 40(11), pp. 2525-2537.
13. Liou, T. M., Chen, C. C., and Tsai, T. W., 2000, "Heat Transfer and Fluid Flow in a Square Duct With 12 Different Shaped Vortes Generators," ASME J. Heat Transfer, 122(2), pp. 327-335.
14. Taslim, M. E., Li, T., and Kercher, D. M., 1996, "Experimental Heat Transfer and Friction in Channels Roughened With Angled, V-Shaped and Discrete Ribs on Two Opposite Walls," ASME J. Turbomach., 118(1), pp. 20-28.
15. Park, J. S., Han, J. C., Huang, Y., and Ou, S., 1992, "Heat Transfer Performance Comparisons of Five Different Rectangular Channels With Parallel Angled Ribs," Int. J. Heat Mass Transfer, 35(11), pp. 2891-2903.
16. Abdon, A., and Sundén, B., 1998, "A Numerical Method to Calculate the Cooling Performance of a Rib-Roughened Duct," in Advanced Computational Methods in Heat Transfer (eds., A. J. Nowak, C. A. Brebbia, R. Bialecki, and M. Zerroukat), pp. 381-392, Computational Mechanics Publications, Southampton, UK.
17. Liou, T. M., Wu, Y. Y., and Chang, Y., 1993, "LDV Measurements of Periodic Fully Developed Main and Secondary Flows in a Channel With Rib-Disturbed Walls," ASME J. Fluids Eng., 115(1), pp. 109-114.
18. Iacovides, H., Jackson, D. C., Launder, B. E., and Yuan, Y. M., 1999, "An Experimental Study of a Rib-Roughened Rotating U-Bend Flow," Exp. Therm. Fluid Sci., 19, pp. 151-159.
19. Hirota, M., Fujita, H., and Yokosawa, H., 1994, "Experimental Study on Convective Heat Transfer for Turbulent Flow in a Square Duct With a Ribbed Rough Wall (Characteristics of Mean Temperature Field)," ASME J. Heat Transfer, 116(2), pp. 332-340.
20. Kiml, R., Mochizuki, S., and Murata, A., 2000, "Function of Ribs as Turbulators and Secondary Flow Inducers," 9th International Symposium on Flow Visualization, Paper No. 164, Edinburgh, UK.
21. Adrian, R. J., 1991, "Particle Imaging Techniques for Experimental Fluid Mechanics," Annu. Rev. Fluid Mech., 23, pp. 261-304.
22. Liu, Z. C., Landreth, C. C., Adrian, R. J., and Hanratty, T. I., 1991, "High Resolution Measurement of Turbulent Structure in a Channel With Particle Image Velocimetry," Exp. Fluids, 10(6), pp. 301-312.
23. Raffel, M., Willen, C., and Kompenhans, J., 1998, "Particle Image Velocimetry: A Practical Guide," Springer, Berlin.
24. Son, S. Y., Kihm, K. D., and Han, J.-C., 2002, "PIV Flow Measurements for Heat Transfer Characterization in Two-Pass Square Channels With Smooth and 90 deg Ribbed Walls," Int. J. Heat Mass Transfer, 45, pp. 4809-4822.
25. Bonhoff, B., Parneix, S., Leusch, J., Johnson, B. V., Schabacker, J., and Bales, A., 1999, "Experimental and Numerical Study of Developed Flow and Heat Transfer in Coolant Channels With 45 deg Ribs," Exp. Therm. Fluid Sci., 20, pp. 311-319.
26. Schabacker, J., Böles, A., and Johnson, B. V., 1998, "PIV Investigation of the Flow Characteristics in an Internal Coolant Passage With Two Ducts Connected by a Sharp 180 deg Bend," ASME paper 98-GT-544, Stockholm, Sweden.
27. Schabacker, J., Böles, A., and Johnson, B. V., 1999, "PIV Investigation of the Flow Characteristics in an Internal Coolant Passage With 90 deg Rib Arrangement," Proc. 3rd European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, pp. 973-984, London, UK, 2-5 March.
28. Gao, X., 2002, "Heat Transfer and Fluid Flow Investigations in Ribbed Ducts and Impinging Jets Using Liquid Crystal Thermography and PIV," Ph.D. thesis, Division of Heat Transfer, Department of Heat and Power Engineering, Lund Institute of Technology, Sweden.
29. Rokni, M., Olsson, C. O., and Sundén, B., 1998, "Numerical and Experimental Investigation of Turbulent Row in a Rectangular Duct," Int. J. Numer. Methods Fluids, 28, pp. 225-242.
30. Rau, G., Cakan, M., Moeller, D., and Arts, T., 1998, "The Effect of Periodic Ribs on the Local Aerodynamic and Heat Transfer Performance of a Straight Cooling Channel," ASME J. Turbomach., 120(2), pp. 368-375.
31. Liou, T. M., Wu, Y. Y., and Chang, Y., 1993, "LDV Measurements of Periodic Fully Developed Main and Secondary Flows in a Channel With Rib-Disturbed Walls," ASME J. Fluids Eng., 115(1), pp. 109-114.
32. Jia, R., 2002, "Numerical Study of Cooling Processes Relevant for Gas Turbine Combustor and Blades," Licentiate Thesis, Division of Heat Transfer, Lund Institute of Technology, Sweden.
33. Naimi, M., and Gessner, F. B., 1997, "Calculation of Fully Developed Turbulent Flow in Rectangular Ducts With Two Opposite Roughened Walls," Int. J. Heat Mass Transfer, 18, pp. 471-481.