Liquid radial dispersion in liquid-solid circulating fluidized beds with viscous liquid medium

Chemical Engineering Communications

Volumn 192, Issue 1-3, 2005, Pages 257-271

  Cho, Y J ^a   Song, P S ^a   Lee, C G ^a   Kang, Y ^a   Kim, S D ^b   Fan, L T ^c  

^a Chungnam National University   (South Korea)

^b Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

^c Kansas State University   (United States)

Author keywords

Circulating fluidized bed; Liquid solid; Pressure fluctuations; Radial dispersion coefficient; Viscous liquid medium

Indexed keywords

CONCENTRATION (PROCESS); FLUIDIZED BEDS; PARTICLE SIZE ANALYSIS; PRESSURE EFFECTS; VELOCITY MEASUREMENT; VISCOSITY OF LIQUIDS;

AUTOCORRELATION COEFFICIENTS; LIQUID RADIAL DISPERSION; LIQUID-SOLID CIRCULATING FLUIDIZED BEDS;

DISPERSIONS;

DISPERSION; FLUIDIZED BED; LIQUID-SOLID TWO-PHASE FLOW; RADIAL FLOW; VISCOUS FLUID;

EID: 11044221341     PISSN: 00986445     EISSN: None     Source Type: Journal    
DOI: 10.1080/00986440590473470     Document Type: Article

References (28)

1. Bendat, J. S. and Piersol, A. G. (1980). Engineering Application of Correlation and Spectral Analysis, 47-64, John Wiley, New York.
2. Chen, Y. M., Jang, C. S., Cai, P., and Fan, L. S. (1991). On the formation and disintegration of particle cluster in a liquid-solid transport bed, Chem. Eng. Sci., 46, 2253-2268.
3. Cho, Y. J., Namkung, W., Kim, S. D., and Park, S. (1994). Effects of secondary air injection on axial solid holdup distribution in a circulating fluidized bed, J. Chem. Eng. Jpn., 27, 158-164.
4. Cho, Y. J., Nam, S. H., Kim, S. J., Kang, Y., and Kim, S. D. (2001a). Heat transfer and bubble properties in three-phase circulating fluidized beds, Chem. Eng. Sci., 56, 1275-1281.
5. Cho, Y. J., Song, P. S., Kim, S. H., Kang, Y., and Kim, S. D. (2001b). Stochastic analysis of gas-liquid-solid flow in three-phase circulating fluidized beds, J. Chem. Eng. Jpn., 34, 254-264.
6. El-Temtamy, S., El-Sharnoubi, Y. O., and El-Halwagi, M. M. (1979). Liquid dispersion in gas-liquid-solid fluidized beds. Part II: Axial and radial dispersion: The dispersed plug-flow model, Chem. Eng. J., 18, 161-168.
7. Fan, L. S. (1989). Gas-Liquid-Solid Fluidization Engineering, Butterworth, Boston.
8. Fan, L. T., Kang, Y., Yashima, M., and Neogi, D. (1995). Stochastic behavior of fluidized particles in a liquid-solid fluidized bed, Chem. Eng. Commum., 135, 147-160.
9. Hay, J. M., Nelson, B. H., Briens, C. L., and Bergougnou, M. A. (1995). The calculation of the characteristics of a chaotic attractor in a gas-solid fluidized bed, Chem. Eng. Sci., 50, 373-380.
10. Kang, Y. and Kim, S. D. (1986). Radial dispersion characteristics of two- and three-phase fluidized beds, Ind. Eng. Chem. Des. Dev., 25, 717-722.
11. Kang, Y., Shim, J. S., Ko. M. H., and Kim, S. D. (1996). Fractal analysis of pressure fluctuations in a three-phase bubble column reactor operating at low pressure, Korean J. Chem. Eng., 13, 317-323.
12. Kang, Y., Woo, K. J., Ko, M. H., and Kim, S. D. (1997). Particle dispersion and pressure fluctuations in three-phase fluidized besd, Chem. Eng. Sci., 52, 3723-3732.
13. Kang, Y., Song, P. S., Yun, J. S., Yeong, Y. Y., and Kim, S. D. (2000). Effects of seconadry air injection on gas-solid flow behavior in circulating fluidized beds, Chem. Eng. Commun., 177, 31-47.
14. Karamavruc, A. I. and Clark, N. N. (1997). Local differential pressure analysis in a slugging bed using deterministic chaos theory, Chem. Eng. Eng. Sci., 52, 357-370.
15. Kim, S. D. and Kang, Y. (1996). Dispersed phase characteristics in three-phase fluidized beds, In Mixed-Flow Hydrodynamics, Gulf Pub. Co., Houston, Tex.
16. Kim, S. D. and Kang, Y. (1997). Heat and mass transfer in three-phase fluidized bed reactor-an overview, Chem. Eng. Sci., 52, 3639-3660.
17. Kim, S. H., Cho, Y. J., Song, P. S., Kang, Y., and Kim, S. D. (1999). Phase holdup characteristics in three-phase circulating fluidized beds, Hwakak Konghak, 37, 961-920.
18. Kuramoto, K., Tanaka, K., Tsutsumi, A., Yoshida, K., and Chiba, T. (1998). Macroscopic flow structure of solid particle in circulating liquid-solid fluidized bed riser, J. Chem. Eng. Jpn., 31, 258-265.
19. Kuramoto, K., Tsutsumi, A., and Chiba, T. (1999). High-velocity fluidization of solid particles in a liquid-solid circulating fluidized bed system, Can. J. Chem. Eng., 77, 291-298.
20. Liang, W. G., Zhu, J. X., Jin, Y., Yu, Z. Q., Wang, Z. W., and Zhou, J. (1996). Radial non-uniformity of flow structure in a liquid-solid circulating fluidized bed, Chem. Eng. Sci., 51, 2001-2010.
21. Liang, W. G., Zhang, S., Zhun, J. X., Jin, Y., Yu, Z., and Wang, Z. (1997). Flow characteristics of the liquid-solid circulating fluidized bed, Powder Technol., 90, 95-102.
22. Mckain, D., Clark, N., and Atkinson, C. (1994). Correlating local tube surface heat transfer with bubble presence in a fluidized bed, Powder Technol., 79, 69-79.
23. Roy, S., Chen, J., Kumar, S. B., Al-Dahhan, M. H., and Dudukovic, M. P. (1997). Tomographic and particle tracking studies in a liquid-solid riser, Ind. Eng. Chem. Res., 36, 466-469.
24. Zheng, Y. and Zhu, J. X. (2000a). Overall pressure balance and system stability in a liquid-solid circulating fluidized bed, Chem. Eng. J. 79, 145-153.
25. Zheng, Y. and Zhu, J. X. (2000b). Microstructure aspects of the flow behavior in a liquid-solid circulating fluidized bed, Can. J. Chem. Eng., 78, 75-81.
26. Zheng, Y. and Zhu, J. X. (2001). The onset velocity of liquid-solid circulating fluidized bed, Powder Technol., 114, 244-251.
27. Zheng, J., Zhu, J. X., Wen, J., Martin, S. A., Bassi, A. S., and Margarits, A. (1999). The axial hydrodynamic behavior in a liquid-solid circulating fluidized bed, Can. J. Chem. Eng., 77, 284-290.
28. Zhu, J.X., Zheng, Y., Karamanev, D.G., and Bassi, A. S. (2000). (Gas-)liquid-solid circulating fluidized beds and their potential application to bioreactor engineering, Can. J. Chem. Eng., 78 82-94.