Lubricant oils additivated with polymers in EHD contacts: Part 1. Rheological behaviour

Lubrication Science

Volumn 17, Issue 1, 2004, Pages 1-24

  Bercea, M ^a   Paleu, V ^b   Bercea, I ^b  

^a PETRU PONI INSTITUTE OF MACROMOLECULAR CHEMISTRY   (Romania)

^b GHEORGHE ASACHI TECHNICAL UNIVERSITY OF IASI   (Romania)

Author keywords

EHD traction; Eyring shear stress; Limiting shear stress; Lubricant shear modulus; Mineral oil; Polymer additive; Rheological parameters

Indexed keywords

ADDITIVES; ELASTIC MODULI; ELASTOHYDRODYNAMIC LUBRICATION; MATHEMATICAL MODELS; MINERAL OILS; PARAMETER ESTIMATION; POLYMERS; SHEAR STRESS;

EHD TRACTION; EYRING SHEAR STRESS; POLYMER ADDITIVES; RHEOLOGICAL PARAMETERS;

LUBRICATING OILS;

EID: 10844230329     PISSN: 09540075     EISSN: None     Source Type: Journal    
DOI: 10.1002/ls.3010170102     Document Type: Article

References (27)

1. Johnson, K.L., and Tevaarwerk, J.L., 'Shear behaviour of elastohydrodynamic oil films', Proc. R. Soc. Land., A356 (1977) 215.
2. Bair, S., and Winer, W.O., 'A rheological model for elastohydrodynamic contacts based on primary laboratory data', ASME J. Lubr. Technol., 101 (1979) 258.
3. Gecim, B., and Winer, W.O., 'Lubricant limiting shear stress effect on EHD film thickness', ASME J. Lubr. Technol., 102 (1980) 213.
4. Wang, S.H., and Zhang, H.H., 'Combined effects of thermal and non-Newtonian character of lubricant on pressure, film profile, temperature rise, and shear stress in EHD', ASME J. Trib., 109 (1987) 666.
5. Hirst, W., and Moore, A.J., 'The effect of temperature on traction in elastohydrodynamic lubrication', Phil. Trans. R. Soc. Lond., A298 (1980) 183.
6. Evans, C.R., and Johnson, K.L., 'The rheological properties of elastohydrodynamic lubricants', Proc. IMechE, 200, C5 (1986) 303.
7. Makino, T., and Kawase, T., 'Estimation of traction properties based on a nonlinear viscoelastic model', Trans. ASME, 121 (1999) 286.
8. Cann, P.C., and Spikes, H.A., 'The behaviour of polymer solutions in concentrated contacts: immobile surface layer formation' Trib. Trans., 37 (1994) 580.
9. Smeeth, M., Spikes, H.A., and Günsel, S., 'Performance of viscosity index improvers in lubricated contacts', Langmuir, 12 (1996) 4594.
10. Georges, E., Georges, J.-M., and Diraison, C., 'Rheology of olefinic copolymer layers adsorbed on solid surfaces', Trib. Trans., 39 (1996) 563.
11. Mitsui, H., and Spikes, H.A., 'Predicting EHD film thickness of lubricant polymer solutions', Trib. Trans., 41 (1998) 1.
12. Bercea, M., Bercea, I., Nélias, D., and Olaru, D.N., 'Polyethylene as an additive for mineral oils: I. Influence of the polymer concentration on the film-forming properties in rolling bearing', Trib. Trans., 42 (1999) 851.
13. Bercea, M., Bercea, I., Nélias, D. and Olaru, D.N. 'Tribological behaviour of mineral oils additivated with polyethylene', Lubrication Science, 11 (1999) 247.
14. Paleu, V., Vergne, Ph., Nélias, D., and Bercea, M. 'Rheological behaviour of mineral oils additivated with polyethylene', Proc. 3rd Int. Conf. on Tribology Balkan Trib '99, Sinai, III, 1999, p. 143.
15. Hamrock, B.J., and Dowson, D. 'Isothermal elastohydrodynamic lubrication of point contacts: III. Fully flooded results', ASME J. Lubr. Technol., 99 (1977) 264.
16. Yoshida, K., Hosonuma, K., and Sakurai, T., 'Behaviour of polymer-thickened oils in lubricated concentrated contacts', Wear, 98 (1984) 63.
17. Willermet, P.A., McWatt, D.G., and Wedeven, L.D., 'Traction behaviour under extreme conditions', SAE paper 1999-01-3612.
18. Tevaarwerk, J.L., and Johnson, K.L., 'A simple non-linear constitutive equation for elastohydrodynamic oil films', Wear, 35 (1975) 345.
19. Bair, S., and Winer, W.O., 'Shear strength measurements of lubricants at high pressures', Trans. ASME, J. Lubr. Technol., 101 (1979) 251.
20. Kragelski, I.V., Friction and Wear, Butterworths, 1965.
21. Wu, S., and Cheng, H.S., 'Empirical determination of effective lubricant rheological parameters', Trib. Trans., 37 (1994) 138.
22. Bercea, M., Bercea, I., Nélias, D., and Flamand, L., 'Polyethylene as additive for mineral oils: II. EHD traction behavior', STLE Trib. Trans., 45, 2 (2002) 145.
23. Johnson, K.L., and Cameron, R., 'Shear behaviour of elastohydrodynamic oil film at high rolling contact pressure', Proc. IMechE, 182 (1968) 307.
24. Murch, L.E., and Wilson, W.R.D., 'A thermal EHD inlet zone analysis', Trans. ASME, J. Lubr. Technol., 97 (1975) 212.
25. Jacobson, B.O., Rheology and EHD Lubrication, Elsevier, Amsterdam, 1991.
26. Dalmaz, G., 'Film thickness and traction measurements in small elastohydrodynamic elliptical contacts', Proc. 5th Leeds-Lyon Symp. Tribol., 1978, p. 71.
27. Muraki, M., and Dong, D., 'Derivation of basic rheological parameters from experimental elastohydrodynamic lubrication traction curves of low-viscosity lubricants', Proc. IMechE, Part J, 213 (1999) 53.