Modeling of the monotonic and cyclic swift effects using anisotropic finite viscoplasticity theory based on overstress (AFVBO): Part I - Constitutive model

International Journal of Solids and Structures

Volumn 41, Issue 18-19, 2004, Pages 5301-5311

  Colak, Ozgen U ^a,b  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

^b YILDIZ TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Anisotropy; Free end torsion; Swift effect; Viscoplasticity

Indexed keywords

ANISOTROPY; MATHEMATICAL MODELS; METAL FORMING; STRESS ANALYSIS; TORSIONAL STRESS;

FINITE VISCOPLASTICITY THEORY BASED ON OVERSTRESS (FVBO); FREE-END TORSION; SWIFT EFFECTS;

VISCOPLASTICITY;

EID: 10644259568     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2004.04.013     Document Type: Article

References (42)

1. Asaro, R.J., Needleman, A., 1985. Texture development and strain hardening in rate dependent polycrystals. Acta Metallurgica 33 (6), 923-953.
2. Bertram, A., Bohlke, T., Kraska, M., 1997. Numerical simulation of deformation induced anisotropy of polycrystals. Computational Materials and Science 9, 158-167.
3. Billington, E.W., 1976. Non-linear mechanical response of various metals: II. Permanent length changes in twisted tubes. Journal of Physics D: Applied Physics 9, 533-552.
4. Billington, E.W., 1977a. Non-linear mechanical response of various metals: I. Dynamic and static response to simple compression, tension and torsion in the as-received and annealed states. Journal of Physics D: Applied Physics 10, 519-531.
5. Billington, E.W., 1977b. Non-linear mechanical response of various metals: III. Swift effect considered in relation to stress-strain behavior in simple compression, tension and torsion in the as-received and annealed states. Journal of Physics D: Applied Physics 10, 553-569.
6. Boehlke, T., Bertram, A., Krempl, E., 2001. Modeling of deformation induced anisotropy. Society for Engineering Science Meeting, San Diego, CA.
7. Chow, H., 1993. A finite element method for an incremental viscoplasticity theory based on overstress. Ph.D. Thesis. Rensselaer Polytechnic Institute, Troy, New York.
8. Dafalias, Y.F., 1990. The plastic spin in viscoplasticity. International Journal of Solids and Structures 26 (2), 149-163.
9. Gomaa, S., 1999. Computational procedures for finite deformation rate-independent plasticity and visco-plasticity based on overstress. PhD. Thesis. Rensselaer Polytechnic Institute, Troy, New York.
10. Harren, S., Lowe, T.C., Asaro, R.J., Needleman, A., 1989. Analysis of large strain shear in rate dependent face centered cubic polycrystals: correlation of micro and macromechanics. Philosophical Transactions of the Royal Society of London, Series A 328, 443-500.
11. Hill, R., 1953. Theory of yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society of London, Series A 193, 281.
12. Ho, K., Krempl, E., 2000. Modeling of positive, negative and zero rate sensitivity by using the viscoplasticity theory based on overstress (VBO). Mechanics of Time Dependent Materials 4, 21-42.
13. Khan, A., Cheng, P., 1998. An anisotropic elastic-plastic constitutive model for single and polycrystalline metals. II. Experiments and predictions concerning thin-walled tubular OFHC copper. International Journal of Plasticity 14 (1-3), 209-226.
14. Krempl, E., 1994. Deformation induced anisotropy. Rensselaer Polytechnic Institute Report. Mechanics of Materials Laboratory. 94-3.
15. Krempl, E., 1996. A small strain viscoplasticity theory based on overstress. In: Krausz, A.S., Krausz, K. (Eds.), Unified Constitutive Laws of Plastic Deformation. Academic Press, San Diego, pp. 281-318.
16. Krempl, E., 1998. Creep-plasticity interaction. Lecture notes. CISM No: 187. Udine, Italy. 74.
17. Kuroda, M., 1997. Interpretation of the behavior of metals under large plastic shear deformations: a macroscopic approach. International Journal of Plasticity 13 (4), 359-383.
18. Kuroda, M., 1999. Interpretation of the behavior of metals under large plastic shear deformations: comparison of macroscopic predictions to physically based predictions. International Journal of Plasticity 15, 1217-1236.
19. Lee, D., 1978. A continuum description of anomalous yielding in anisotropic metals. Metallurgical Transactions A 9A, 1495-1497.
20. Lee, D., Zaverl, F., 1978. A generalized strain rate dependent constitutive equation for anisotropic metals. Acta Metallurgica 26, 1771-1780.
21. Lee, D., Zaverl, F., 1979. A description of history dependent plastic flow behavior of anisotropic metals. Journal of Engineering Materials and Technology 101, 59-67.
22. Lee, K.-D., Krempl, E., 1991. An orthotropic theory of viscoplasticity theory based on overstress for thermomechanical deformations. International Journal of Solids and Structures 27, 1445-1459.
23. Lehmann, T., 1990. Some considerations concerning deformation induced anisotropy. In: Yielding, Damage, and Failure of Anisotropic Solids. EGFS, Mechanical Engineering Publications, pp. 83-96.
24. Loret, B., 1983. On the effects of plastic rotation in the finite deformation of anisotropic elastoplastic materials. Mechanics of Materials 2, 287.
25. Lowe, T.C., Lipkin, J., 1991. Analysis of axial deformation response during reverse shear. Journal of Mechanics and Physics of Solids 39(3), 417-440.
26. Majors, P., 1993. Modeling of rate dependent deformation of metals and alloys using the viscoplasticity theory based on overstress: behavior of modified 9Cr-1Mo steel at 538 degrees Celsius and deformation induced anisotropy at finite strains. Ph.D. Thesis. Rensselaer Polytechnic Institute, Troy, New York.
27. Majors, P., Krempl, E., 1994. Comments on induced anisotropy, the Swift effect, and finite deformation inelasticity. Mechanics Research Communications 21, 465-412.
28. Montheillet, F., Cohen, M., Jonas, J.J., 1984. Axial stresses and texture development during the torsion testing of Al, Cu, and α-iron. Acta Metallurgica 32 (11), 2077-2089.
29. Montheillet, F., Gilormini, P., Jonas, J.J., 1985. Relation between axial stresses and texture development during torsion testing: A simplified theory. Acta Metallurgica 33 (4), 705-707.
30. Mroz, Z., Niemunis, A., 1990. On the description of deformation anisotropy of materials. In: Yielding, Damage and Failure of Anisotropic Solids. EGFS5, Mechanical Engineering Publications, London, pp. 171-186.
31. Neale, K.W., Toth, L.S., Jonas, J.J., 1990. Large strain shear and torsion of rate-sensitive FCC polycrystals. International Journal of Plasticity 6, 45-61.
32. Nouailhas, D., Chaboche, J.L., 1991. Anisotropic constitutive modeling for single crystal superalloys using a continuum phenomenological approach. Third International Conference on Constitutive Laws for Engineering Materials, Theory and Applications. Arizona.
33. Rollett, A.D., Wright, S.I., 1998. Typical textures in metals. In: Kocks, U.F., Tome, C.N., Wenk, H.R. (Eds.), Texture and Anisotropy. Cambridge University Press.
34. Sham, T.L., 1999. Objective rate of fourth order Eulerian tensor. Personal communication.
35. Shih, C.F., Lee, D., 1978. Further developments in anisotropic plasticity. Transactions of the ASME 100, 294-302.
36. Stouffer, D., Dame, T., 1996. Inelastic Deformation of Metals. Wiley, New York.
37. Swift, H., 1947. Length changes in metals under torsional overstrain. Engineering 163, 253-257.
38. Taylor, G.I., 1938. Plastic strain in metals. Journal of Institute of Metals 62, 307-324.
39. Van der Giessen, E., Wu, P.D., Neale, K.W., 1992. On the effect of plastic spin on large strain elastic-plastic torsion of solid bars. International Journal of Plasticity 8, 773-801.
40. Voyiadjis, G., Kattan, P., 1992. Finite elasto-plastic analysis of torsion problems using different spin tensors. International Journal of Plasticity 8, 271-314.
41. Wu, P.D., Neale, K.W., Van der Giessen, E., 1996. Simulation of the behavior of FCC polycrystals during reversed torsion. International Journal of Plasticity 12 (9), 1199-1219.
42. Wu, H., Xu, Z., Wang, P., 1998. Torsion test of aluminum in the large strain range. International Journal of Plasticity 13 (10), 873-892.