Influence of the 180° bend geometry on the pressure loss and heat transfer in a high aspect ratio rectangular smooth channel

Proceedings of the ASME Turbo Expo 2004

Volumn 3, Issue , 2004, Pages 685-695

  Pape, Detlef ^a   Jeanmart, Hervé ^a,b   Von Wolfersdorf, Jens ^a   Weigand, Bernhard ^a  

^a UNIVERSITY OF STUTTGART   (Germany)

^b UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

Author keywords

[No Author keywords available]

Indexed keywords

HYDRAULICS; KINEMATICS; LIQUID CRYSTALS; MASS TRANSFER; REYNOLDS NUMBER; VISCOSITY;

BEND GEOMETRY; DENSITY; KINEMATIC VISCOSITY; PRESSURE LOSS;

HEAT TRANSFER;

EID: 10244260456     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-53753     Document Type: Conference Paper

References (26)

1. Metzger, D., Plevich, C., Fan, C., 1984. "Pressure loss through sharp 180-deg turns in smooth rectangular channels". ASME J. of Engineering For Gas Turbines and Power, 106, pp. 677-681.
2. Metzger, D., Sahm, M., 1986. "Heat transfer around sharp 180-deg turns in smooth rectangular channels". ASME J. of Heat Transfer, 108, pp. 500-506.
3. Fan, C., Metzger, D., 1987. "Effects of channel aspect ratio on heat transfer in rectangular passage sharp 180-deg turns". ASME Paper 87-GT-113.
4. Metzger, D., Fan, C., Plevich, C., 1988. "Effects of transverse rib roughness on heat transfer and pressure loss in rectangular ducts with sharp 180-deg turns". AIAA-88-0166
5. Chyu, M., 1991. "Regional heat transfer in two-pass and three-pass passages with 180-deg sharp turns". ASME J. of Heat Transfer, 113, pp. 63-70.
6. Ekkad, S., Han, J., 1998. "Detailed heat transfer distributions in two-pass square channels with rib turbulators". Int. J. of Heat and Mass Transfer, 40, pp. 2525-2537.
7. Han, J., Zhang, P., 1991. "Effects of rib-angle orientation on local mass transfer distribution in three-pass smooth and rib-roughened channels". ASME J. of Turbomachinery, 113, pp. 123-130.
8. Mochizuki, S., Murata, A., Fukunaga, M., 1997. "Effects of rib arrangements on pressure drop and heat transfer in a rib roughened channel with a sharp 180-deg turn". ASME J. of Turbomachinery, 119, pp. 610-616.
9. Chanteloup, D., 2002. Experimental Investigation of heat transfer and flow characteristics in various geometries of 2-pass internal cooling passages of gas turbine airfoils. Ph.D. thesis, EPFL Lausanne.
10. Astarita, T., Cardone, G., 2000. "Thermofluidynamic analysis of the flow in a sharp 180deg turn channel". Experimental Thermal and Fluid Science, 20, pp. 118-200.
11. Ekkad, S., Pamula, G., Shantiniketanam, M., 2000. "Detailed heat transfer measurments inside straight and tapered two-pass channels with rib turbulators". In 34th National Heat Transfer Conference, Pittsburgh. NHTC2000-12036.
12. Liou, T., Tzeng, Y., Chen, C., 1998. "Fluid flow in a 180-deg sharp turning duct with different divider thicknesses". ASME Paper 98-GT-189.
13. Hirota, M., Fujita, H., Syuhada, A., Araki, S., Yoshida, T., Tanaka, T., 1999. "Heat/mass transfer characteristics in two-pass smooth channels with a sharp 180-deg turn". Int. J. of Heat and Mass Transfer, 42, pp. 3757-3770.
14. Schnieder, M., Höcker, R., von Wolfersdorf, J., 2001. "Heat transfer and pressure loss in a 180deg-turn of a rectangular rib-roughened two passage channel.". In ExHFT5, 5th World Conf. Exp. Heat Transfer, Fluid Mechanics and Thermodynamics.
15. Plevich, C., 1984. Pressure losses and flow visualization in rectangular duct 180-deg turns. Master's thesis, Arizona State University.
16. Rao, R., Prabhu, 2003. "Effect of multiple guide vanes in pressure loss through sharp 180-deg bends". In ISABE2003-1158.
17. S.V. Ekkad, Y. H., Han, J., 1998. "Detailed heat transfer distributions in two-pass square channels with rib turbula tors and bleed holes". Int. J. of Heat and Mass Transfer, 41, pp. 3781-3791.
18. Ran, J., Zhang, P., 1989. "Pressure loss distribution in three pass rectangular channels with rib turbulators". ASME J. of Turbomachinery, 111, pp. 515-521.
19. Wang, Z., Gillespie, D., Ireland, P., 1996. "Advances in heat transfer measurements using liquid crystals". In Proceedings of the Turbulent Heat Transfer Conference San Diego, Engineering Foundation New York.
20. Ireland, P., Neely, A., Gillespie, D., Robertson, A., 1999. "Turbulent heat transfer measurements using liquid crystals", Int. J. of Heat and Fluid Flow, 20, pp. 355-367.
21. Schulte, D., Jones, T., 1973. "Heat transfer measurements in short duration hypersonic facilities". In NATO Advisory Group Aeronautical RD AGARDOGRAPH, vol. 165.
22. Vogel, G., Weigand, B., 2001. "A new evaluation method for transient liquid crystal experiments". In 35th ASME National Heat Transfer Conference.
23. Metzger, D., Larson, D., 1986. "Use of melting point surface coatings for local convection heat transfer measurements in rectangular channel flow with 90-deg turns". ASME J. of Heat Transfer, 108, pp. 48-54.
24. von Wolfersdorf, J., Hoecker, R., Hirsch, C., 1998. "A data reduction procedure for transient heat transfer measurements in long internal cooling channels". ASME J. of Heat Transfer, 120, pp. 314-321.
25. Kallinderis, Y., Khawaja, A., McMorris, H., 1996. "Hybrid prismatic/tetrahedral grid generation for flows around complex geometries". AIAA J., 34.
26. Fluent Manual, 1998. FLUENTS User's Guide.