Natural frequencies and modes shapes of two mistuned bladed discs on the shaft

Proceedings of the ASME Turbo Expo 2004

Volumn 6, Issue , 2004, Pages 447-455

  Rza̧dkowski, Romuald ^a,b   Drewczynski, Marcin ^a  

^a INSTITUTE OF FLUID FLOW MACHINERY   (Poland)

^b POLISH NAVAL ACADEMY   (Poland)

Author keywords

[No Author keywords available]

Indexed keywords

DISKS (MACHINE COMPONENTS); NATURAL FREQUENCIES; RESONANCE; ROTATION; ROTORS; TURBOMACHINE BLADES; VIBRATIONS (MECHANICAL);

BLADE LENGTH; BLADED DISKS; NODAL DIAMETERS; TORSIONAL FREQUENCIES;

SHAFTS (MACHINE COMPONENTS);

EID: 10244251699     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/gt2004-54265     Document Type: Conference Paper

References (38)

1. Berger H., and Kulig T. S., 1981, "Simulation Models for Calculating the Torsional Vibrations of Large Turbine-Generator Units after Electrical System Faults," Simens Forsch, u. Entwickl. - Ber. Bd 10 Nr. 4, Springer-Verlag, pp. 237-245.
2. Chivens D. R., and Nelson H. D., 1975, "The Natural Frequency and Critical Speed of Rotating Flexible Shaft-Disk System," Journal of Engineering for Industry, pp. 881-886.
3. Rza̧dkowski R., 1998, "Dynamics of Rotor Steam Turbine Rotor Blading, Part Two, Bladed Discs," Maszyny Przepływowe Tom 22, Wrocław Ossolineum.
4. Loewy R. G. and Khader N., 1984, " Structural Dynamics of rotating bladed disk assemblies coupled with flexible shaft motions", American Institute of Aeronautic and Astronautics Journal, 22, 1319-1327.
5. Crawley E. F., Ducharme E. and Mokadam D, 1986, "Analytical and experimental investigation of coupled bladed disk shaft whirl of a cantilever turbofan", ASME J. Eng. Gas Turbine Power, 108, 567-576.
6. Dubigeon S., and Michon J. C., 1986, "Modes for Deformeble Periodic Cyclic Symmetric System Driven in Uniform Rotation by a Flexible Shaft," Journal of Sound and Vibration, 106(1), pp. 53-70.
7. th Biennial ASME Conference on "Mechanical Vibration and Noise, Montreal, Canada, Rotating Machinery Dynamics, DE-Vol. 18-1, 135-140.
8. Sakata M., Kimura K., Park S.K and Ohnabe H., 1989, "Vibration of bladed flexible rotor due to gyroscopic moment", Journal of Sound and Vibration. 131 (3), 417-430, 1989.
9. th Biennial ASME Conference on Mechanical Vibration and Noise, Montreal, Canada, Rotating Machinery Dynamics, DE-Vol. 18-1, pp. 17-21.
10. Khader N., Loewy R.G., 1990, "Shaft flexibility effects on the forced response of a bladed-disk assembly", Journal of Sound and Vibration, 139(3), 469-485
11. Khader N., and Masoud S., 1990, "The Assumed Mode Method in Structural Dynamics of Bladed-Disk-Shaft System", ASME paper 90-GT-316.
12. Khader N., and Masoud S., 1991, "Vibration of mistuned bladed disks supported by flexible continuous shafts," Journal of Sound and Vibration, 149(3), pp. 471-488.
13. Zhang W., Wang W., Wang H and Tang J., 1994, "Analytical and experimental investigation of bladed-disc/shaft coupled system". Proceedings of Fourth International Conference on Rotor Dynamic, Chicago, 63-68, 1994.
14. Chung S., B., and Lee C.W., 1996, "Vibration analysis of shaft-bladed disk system by using substructure synthesis and assumed modes method", Journal of Sound and Vibration. 189 (5), 587-608.
15. Huang S. C., and Ho K. B., 1996, "Coupled Shaft-Torsion and Blade-Bending Vibrations of a Rotating Shaft-Disk-Blade Unit," Transaction of the ASME, Vol. 118, pp. 100-106.
16. Jacquet-Richardet G., Ferraris G., and Rieutord P., 1996, "Frequencies and Modes of Rotating Flexible Bladed Disc-Shaft Assemblies: A Global Cyclic Symmetry Approach," Journal of Sound and Vibration, 191(5), pp. 901-915.
17. Al-Bedoor B. O., 1999, "Dynamic model of coupled shaft torsional and blade deformation in rotors", Computer Methods in Applied Mechanics and Engineering, 169, 1-2, 177-190.
18. Al-Bedoor B. O., 1999, "Reduced-order nonlinear dynamic model of coupled shaft-torsional and blade-bending vibrations in rotors", Journal of Engineering for Gas Turbines and Power, 123, 82-88, 2001.
19. Repetski O., Rygikov I. And Springer H., 1999, " Numerical Analysis of Rotating Flexible Blade-Disk-Shaft System", ASME paper 99-GT-317.
20. Wickelt J.A, Tseng J.G., 1998; "Splitting Vibration Modes in Acoustically Coupled Disk Stacks", J. Vibration Acoustics, 30, pp. 99-108.
21. Wagner, J. T., 1967, "Coupling of Turbomachines Blade Vibrations through the Rotor," ASME J. Eng. Power 89, pp. 502-512.
22. Dye, R. C. F., and Henry, T. A., 1969, "Vibration Amplitudes of Compressor Blades Resulting From Scatter in Blade Natural Frequencies," ASME J. Eng. Power 91, pp. 182-188.
23. Ewins, D. J., 1969, "The Effects of Detuning Upon the Forced Vibrations of Bladed Discs," J. Sound Vib, 9, pp. 65-79.
24. El-Bayoumy, L. E., and Srinivasan, A. V., 1975, "Influence of Mistuning on Rotor-Blade Vibrations," AIAA J., 13, pp. 460-464.
25. Irretier, H., 1983, "Spectral Analysis of Mistuned Blade Disc Assemblies by Component Mode Synthesis," Vibrations of Bladed Disk Assemblies, ASME, New York, pp. 115-125.
26. Rza̧dkowski, R., 1994, "The General Model of Free Vibrations of Mistuned Bladed Discs. Part I. Theoretical Model," Journal of Sound and Vibration, 173(3), pp. 395-401.
27. Rza̧dkowski, R., 1994, "The General Model of Free Vibrations of Mistuned Bladed Discs Part II. Numerical results," Journal of Sound and Vibration, 173(3), pp. 402-413.
28. Rza̧dkowski, R., 1996, "Transient Nozzle Excitation of Mistuned Bladed Discs," Journal of Sound and Vibration, 190 (4), pp. 629-643.
29. Wei, S. T., and Pierre, C., 1988, "Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry, Part I: Free Vibrations," ASME J. Vib., Acoust, Stress, Reliab. Des, 110, pp. 429-449.
30. Wei, S. T., and Pierre, C., 1983, "Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry, Part II: Forced Vibrations," ASME J. Vib., Acoust., Stress, Reliab. Des, 110, pp. 439-449.
31. Dugundji, J., and Bundas, D. J., 1983, "Flutter and Forced Response of Mistuning Rotors Using Standing Wave Analysis," AIAA J. 22, pp. 1652-1661.
32. Kaza, K. R., and Kielb, R. E., 1984, "Flutter of Turbofan Rotors with Mistuned Blades," AIAA J. 22, pp. 1618-1625.
33. th International Gas Turbine Conference and Exhibit, Houston, Texas, 18-21 March, ASME Paper No. 85-GT-115.
34. Crawley, E. F., and Hall K. C., 1985, "Optimization and Mechanisms of Mistuning in Cascades," Journal of Engineering for Gas Turbine and Power 107, pp. 418-426.
35. Khader, N., and Lowy, R. G., 1989, "Blade Mistuning Coupled with Shaft Flexibility Effects in Rotor Aeroelasticity," Gas Turbine and Aeroengine Congress and Exposition, Toronto, Ontario, Canada, 4-8 June, ASME Paper No. 89-GT-330.
36. Rza̧dkowski, R., and Kovalov, A., 2003, "2D Inviscid Flutter of the Mistuned Fourth and First Standard Configuration," Transaction of the Institute of Fluid-Flow Machinery, No 112, pp. 139-154.
37. Crawley, E. F., 1983, "In-plane Inertial Coupling in Tuned and Severely Mistuned Bladed Discs," Transactions of the American Society of Mechanical Engineers, Journal of Engineering for Power, 105, pp. 585-590.
38. Rzadkowski, R., Kwapisz, L., Sokołowski, J., Karpiuk, R., Ostowski, P., and Radulski, W., 2003, "Natural Frequencies and Mode Shapes of Rotating Three Shrouded Blades Discs Placed on the Part of the Shaft," Proceedings of the Second International Symposium On Stability Control of Rotating Machinery (ISCORMA-2), Gdańsk, 4-8 August 2003, pp. 381-392.