Flow through a Two-Scale Porosity, Oriented Fibre Porous Medium

Transport in Porous Media

Volumn 54, Issue 1, 2004, Pages 35-53

  Amico, S ^a   Lekakou, C ^a  

^a UNIVERSITY OF SURREY   (United Kingdom)

Author keywords

Fibre beds; Flow; Infiltration; Meso and micro flow; Porous media

Indexed keywords

CAPILLARY FLOW; FLOW CONTROL; MECHANICAL PERMEABILITY; POROUS MATERIALS;

FLOW TRANSFER;

POROSITY;

FLOW MODELING; POROSITY; POROUS MEDIUM;

EID: 0742288511     PISSN: 01693913     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1025799404038     Document Type: Article

References (43)

1. Ahn, K. J., Seferis, J. C. and Berg, J. C.: 1991, Simultaneous measurements of permeability and capillary pressure of thermosetting matrices in woven fabric reinforcements, Polym. Compos. 12(3), 146-152.
2. Amico, S. C.: 2000, Permeability and capillary pressure in the infiltration of fibrous porous media in resin transfer moulding, PhD Thesis, Department of Materials Science and Engineering, University of Surrey, UK.
3. Amico, S. C. and Lekakou, C.: 2000, Mathematical modelling of capillary micro-flow through woven fabrics, Compos. Part A - Appl. Sci. 31(12), 1331-1344.
4. Amico, S. C. and Lekakou, C.: 2002a, Axial impregnation of a fiber bundle. Part 1. Capillary experiments, Polym. Compos. 23(2), 249-263.
5. Amico, S. C. and Lekakou, C.: 2002b, Axial impregnation of a fiber bundle. Part 2. Theoretical analysis, Polym. Compos. 23(2), 264-273.
6. Baish, J. W., Netti, P. A. and Jain, R. K.: 1997, Transmural coupling of fluid flow in microcirculatory network and interstitium in tumors, Microvasc. Res. 53(2), 128-141.
7. Batch, G. L., Chen, Y.-T. and Macosko, C. W.: 1996, Capillary impregnation of aligned fibrous beds: experiments and model, J. Reinf. Plast. Comp. 15, 1027-1051.
8. Beavers, G. S. and Joseph, D. D.: 1967, Boundary conditions at a naturally permeable wall, J. Fluid Mech. 30(1), 197-207.
9. Bruschke, M. V. and Advani, S. G.: 1993, Flow of generalised Newtonian fluids across a periodic array of cylinders, J. Rheol. 37(3), 479-498.
10. Calhoun, D. R., Yalvac, S., Wetters, D. G., Wu, C.-H., Wang, T. J., Tsai, J. S. and Lee, L. J.: 1996, Mold filling analysis in resin transfer molding, Polym. Compos. 17(2), 251-264.
11. Carleton, P. S. and Nelson, G. L.: 1994, Wetout of glass fiber tows in structural reaction moulding. 1. Capillary action and fiber mobility, J. Reinf. Plast. Comp. 13, 20-37.
12. Chan, A. W. and Morgan, R. J.: 1993, Tow impregnation during resin transfer molding of bi-directional nonwoven fabrics, Polym. Compos. 14(4), 335-340.
13. Chen, Y. T., Davis, H. T. and Macosko, C. W: 1995, Wetting of fibre mats for composites manufacturing: I. Visualisation experiments, AIChE J. 41(10), 2261-2273.
14. Choi, C. Y. and Waller, P. M.: 1997, Momentum transport mechanism for water flow over porous media, J. Environ. Eng. - ASCE 123(8), 792-799.
15. Davé, R.: 1990, A unified approach to modelling resin flow during composite processing, J. Compos. Mater. 24(1), 22-41.
16. Gauvin, R., Trochu, P., Lemenn, Y. and Diallo, L.: 1996, Permeability measurement and flow simulation through fiber reinforcement, Polym. Compos. 17(1), 34-42.
17. Gebart, B. R.: 1992, Permeability of unidirectional reinforcements for RTM, J. Compos. Mater. 26(8), 1100-1133.
18. Guha, H. S. and Chaudhury, T. K.: 1993, Flow over a highly porous inclined bed under surface traction: boundary layer in the porous region, Int. J. Eng. Sci. 31(8), 1191-1196.
19. Gupte, S. K. and Advani, S. G.: 1997, Flow near the permeable boundary of an aligned fiber preform: an experimental investigation using laser doppler anemometry, Polym. Compos. 18(1), 114-124.
20. Gutowski, T., Cai, Z., Bauer, S., Boucher, D., Kingery, J. and Wineman, S.: 1987, Consolidation experiments for laminate composites, J. Compos. Mater. 21(7), 650-669.
21. Huang, L.-H., Chiang, I.-L. and Song, C.-H.: 1997, A reinvestigation of laminar channel flow passing over porous bed, J. Chin. Inst. Eng. 20(4), 435-441.
22. Johari, M. A. K. B.: 1994, Resin transfer moulding (RTM): flow permeability of woven cloths and effects of flow on mechanical properties of RTM products, MSc Thesis, Department of Materials Science and Engineering, University of Surrey, UK.
23. Labecki, M., Piret, J. M. and Bowen, B. D.: 1995, Two-dimensional analysis of fluid flow in hollow-fibre modules. Chem. Eng. Sci. 50(21), 3369-3384.
24. Lam, R. C. and Kardos, J. L.: 1991, The permeability and compressibility of aligned and cross-plied carbon-fiber beds during processing of composites. Polym, Eng. Sci., 31(14), 1064-1070.
25. Langlois, W. E.: 1964, Slow Viscous Flow, Macmillan, New York, USA.
26. Lekakou, C. and Bader, M. G.: 1998, Mathematical modelling of macro- and micro-infiltration in resin transfer moulding (RTM), Compos. Part A - Appl. S. 29A, 29-37.
27. Lekakou, C., Johari, M. A. K., Norman, D. and Bader, M. G.: 1996, Measurement techniques and effects on in-plane permeability of woven cloths in resin transfer moulding, Compos. Part A - Appl. S. 27A, 401-408.
28. Lundstrom, T. S.: 2000, The permeability of non-crimp stitched fabrics, Compos. Pan A - Appl. S. 31(12), 1345-1353.
29. McCormack, P. D. and Crane, L.: 1973, Physical Fluid Dynamics, Academic Press, New York, USA.
30. Mehta, K. N. and Narasimha Rao, K.: 1993, Plane flow impinging and flowing over a porous bed, J. Hydraul. Res. 31(4), 563-573.
31. Nassehi, V.: 1998, Modelling of combined Navier-Stokes and Darcy flows in crossflow membrane filtration, Chem. Eng. Sci. 53(6), 1253-1265.
32. Patel, N., Rohatgi, V. and Lee, L. J.: 1995, Microscale flow behavior and void formation mechanisms during impregnation through a unidirectional stitched fiberglass mat, Polym. Eng. Sci., 35(10), 837-851.
33. Phelan Jr., F. R., Leung, Y. and Parnas, R. S.: 1994, Modeling of microscale flow in unidirectional fibrous porous media, J. Thermoplast. Compos. 7, 208-218.
34. Poole, C. P.: 1998, The Physics Handbook: Fundamentals and Key Equations, Wiley, New York, USA.
35. Rohatgi, V., Patel, N. and Lee, L. J.: 1996, Experimental investigation of flow-induced microvoids during impregnation of unidirectional stitched fiberglass mat, Pol. Comp. 17(2), 161-170.
36. Ross, S. M.: 1983, Theoretical model of the boundary condition at a fluid-porous interface, AIChE J. 29(5), 840-846.
37. Saunders, R. A.: 1997, Compression and microstructure of glass fibre fabrics in the processing of polymer composites, PhD Thesis, Department of Materials Science and Engineering, University of Surrey, UK.
38. Simacek, P. and Advani, S. G.: 1996, Permeability model for a woven fabric, Polym. Compos. 17(6), 887-899.
39. Skartsis, L., Kardos, J. L. and Khomani, B.: 1992, Resin flow through fiber beds during composite manufacturing processes, Polym. Eng. Sci., 32(4), 221-239.
40. Stroud, K. A.: 1996, Further Engineering Mathematics: Programmes and Problems, 3rd edn., Macmillan, Basingstoke, UK.
41. Vankan, W. J., Huyghe, J. M., Drost, M. R., Janssen, J. D. and Huson, A.: 1997, A finite element mixture model for hierarchical porous media, Int. J. Numer. Meth. Eng. 40, 193-210.
42. White, F. M.: 1974, Viscous Fluid Flow, McGraw-Hill, New York, USA.
43. Williams, J. G., Morris, C. E. M. and Ennis, B. C.: 1974, Liquid flow through aligned fiber beds, Polym. Eng. Sci. 14(6), 413-419.