A comprehensive experimental investigation of the methyl methacrylate/butyl acrylate/acrylic acid emulsion terpolymerization

Polymer Reaction Engineering

Volumn 11, Issue 4 SPEC. ISS., 2003, Pages 829-853

  Parouti, Sophia ^a   Kammona, Olga ^a   Kiparissides, Costas ^a   Bousquet, Jacques ^b  

^a ARISTOTLE UNIVERSITY OF THESSALONIKI   (Greece)

^b CRES DRTE   (France)

Author keywords

Acrylic acid; Batch and semi batch emulsion terpolymerization; Butyl acrylate; Methyl methacrylate

Indexed keywords

ACRYLIC MONOMERS; CHEMICAL REACTORS; COMPOSITION; GLASS TRANSITION; INITIATORS (CHEMICAL); MOLECULAR WEIGHT DISTRIBUTION; NEGATIVE IONS; PARTICLE SIZE ANALYSIS; SURFACE ACTIVE AGENTS; TEMPERATURE; TERPOLYMERIZATION; THERMAL EFFECTS;

ACRYLIC ACID; BATCH EMULSION TERPOLYMERIZATION; BUTYL ACRYLATE; METHYL METHACRYLATE; SEMI-BATCH EMULSION TERPOLYMERIZATION;

EMULSION POLYMERIZATION;

EID: 0348170936     PISSN: 10543414     EISSN: None     Source Type: Journal    
DOI: 10.1081/PRE-120026375     Document Type: Article

References (30)

1. (1989). Physical constants of some important polymers. In: Brandrup, J., Immergut, E. H., eds. Polymer Handbook. 3rd ed. New York: A Wiley-Interscience Publication, J. Wiley & Sons.
2. Athey, R. D. (1991). The monomers. In: Hudgin, D. E., ed. Emulsion Polymer Technology. Vol. 22. Plastics Engineering, New York: Marcel Dekker, Inc., pp. 59-109.
3. Bangs, L. B. (1984). Uniform Latex Particles. Seragen Diagnostics Inc.
4. Barton, J. (1990). Emulsion copolymerization kinetics with polar monomers. Makromol. Chem. Macromol. Symp. 35/36:41-58.
5. Capek, I., Potisk, P. (1995). Microemulsion and emulsion polymerization of butyl acrylate-I. Effect of the initiator type and temperature. Eur. Polym. J. 31(12):1269-1277.
6. Chern, C. S., Hsu, H. (1995). Semibatch emulsion copolymerization of methyl methacrylate and butyl acrylate. J. Appl. Polym. Sci. 55:571-581.
7. Chern, C. S., Lin, F. Y. J. (1996). Stability of carboxylated poly(butyl acrylate) latices during semibatch emulsion polymerization. J. Appl. Polym. Sci. 61:989-1001.
8. Cuttin, G. R. Tabner, B. J. (1995). Reaction temperature profiles and radical concentration measurements on batch emulsion copolymerizations of methyl methacrylate and butyl acrylate. Eur. Polym. J. 31(12):1215-1217.
9. Cutting, G. R., Tabner, B. J. (1997). Radical concentrations and reaction temperature profiles during the (batch) core-shell emulsion polymerization of methyl methacrylate and butyl acrylate, studied by electron spin resonance spectroscopy. Eur. Polym. J. 33(2):213-217.
10. Guillot, J. (1989). Computer simulation of microstructure and glass transition temperature of random copolymer. In: Polymer Reaction Engineering. Proceedings of the Third Berlin International Workshop on Polymer Reaction Engineering. Berlin; Reichert, K. H., Geiseler, W., eds. Vol. 492. 1st edNew York: VCH Publishers, pp. 295-301.
11. Guillot, J. (1992). Emulsion copolymer glass-transition behavior and particle morphology. In: Daniels, E. S., Sudol, E. D., El-Aasser, M. S., eds. Polymer Latexes: Preparation, Characterization and Applications. Vol. 492. 1st ed. Washington, DC: ACS Symposium Series, American Chemical Society, pp. 145-162.
12. Kammona, O., Fratzikinakis, C., Pladis, P., Kiparissides, C. (2003). A comprehensive experimental and theoretical investigation of the styrene/2-ethylhexyl acrylate emulsion copolymerization. Macromol. Chem. Phys. 204:983-999.
13. Kine, B. B., Novac, R. W. (1989). Acrylic and methacrylic ester polymers. In: Vol. 1. 2nd ed. Encyclopedia of Polymer Science and Engineering. New York: A Wiley-Interscience Publication, John Wiley and Sons, pp. 234-299.
14. Maxwell, I. A., Napper, D. H., Gilbert, R. G. (1987). Emulsion polymerization of butyl acrylate. Kinetics of particle growth. J. Chem. Soc., Faraday Trans. 83:1449-1467.
15. Okaya, T., Suzuki, A., Kikuchi, K. (1999). Importance of grafting in the emulsion polymerization of MMA using PVA as a protective colloid. Effect of initiators. Colloids Surf., A: Physicochem. Eng. Asp. 153: 123-125.
16. Pedrosa, S. M. C. P., Nunhez, J. R. (2000). The behavior of stirred vessels with anchor type impellers. Comput. Chem. Eng. 24:1745-1751.
17. Plessis, C., Arzamendi, G., Leiza, J. R., Schoonbrood, H. A. S.; Charmot, D., Asua, J. M. (2000). Seeded semibatch emulsion polymerization of n-butyl acrylate, Kinetics and structural properties. Macromolecules 33:5041-5047.
18. Plessis, C., Arzamendi, G., Leiza, J. R., Schoonbrood, H. A. S., Charmot, D., Asua, J. M. (2001). Kinetics and polymer microstructure of the seeded semibatch emulsion copolymerization of n-butyl acrylate and styrene. Macromolecules 34:5147-5157.
19. Poehlein, G. W. (1996). Emulsion polymer reaction engineering. In: Advances in Emulsion Polymerization and Latex Technology. 27th Annual Short Course, Emulsion Polymers Institute, Lehigh University, Bethlehem, PA, June 3-7. Vol. 1. El-Aasser, M. S., ed.
20. Sajjadi, S., Brooks, B. W. (2000a). Semibatch emulsion polymerization reactors: polybutyl acrylate case study. Chem. Eng. Sci. 55:4757-4781.
21. Sajjadi, S., Brooks, B. W. (2000b). Butyl acrylate batch emulsion polymerization in the presence of sodium lauryl sulphate and potassium persulphate. J. Polym. Sci. A: Polym. Chem. 37:3957-3972.
22. Sajjadi, S., Brooks, B. W. (2000c). Unseeded semibatch emulsion polymerization of butyl acrylate: bimodal particle size distribution. J. Polym. Sci. A: Polym. Chem. 38:528-545.
23. Sayer, C., Lima, E. L., Pinto, J. C., Arzamendi, G., Asua, J. M. (2000). Kinetics of the seeded semicontinuous emulsion copolymerization of methyl methacrylate and butyl acrylate. J. Polym. Sci. A: Polym. Chem. 38:367-375.
24. Tanrisever, T., Okay, O., Sonmezoglu, I. C. (1996). Kinetics of emulsifier-free emulsion polymerization of methyl methacrylate. J. Appl. Polym. Sci. 61:485-493.
25. Unzueta, E., Forcada, J. (1995a). Semicontinuous emulsion copolymerization of methyl methacrylate and n-butyl acrylate: 1. Effect of mixed emulsifiers in seeded polymerization. Polymer 36(5):1045-1052.
26. Unzueta, E., Forcada, J. (1995b). Semicontinuous emulsion copolymerization of methyl methacrylate and n-butyl Acrylate: 2. Effect of mixed emulsifiers in unseeded polymerization. Polymer 36(22):4301-4308.
27. Urretabizkaia, A., Sudol, E. D., El-Aasser, M. S., Asua, J. M. (1993). Calorimetric monitoring of emulsion copolymerization reactions. J. Polym. Sci. Chem. Ed. 31:2907.
28. Urretabizkaia, A., Leiza, J. R., Asua, J. M. (1994). On-line terpolymer composition control in semicontinuous emulsion polymerization. AIChE J. 40(11):1850-1864.
29. Yu, Z. Q., Li, B. G., Li, B. F., Pan, Z. R. (1999). Preparation and characterization of MMA-BA-DMAEMA terpolymer latex. Colloids Surf., A: Physicochem. Eng. Asp. 153:31-38.
30. Zhang, M. G., Weng, Z. X., Huang, Z. M., Pan, Z. R. (1998). Effects of monomer polarity on MMA/BA/NaMA emulsifier-free emulsion copolymerization. Eur. Polym. J. 34(9):1243-1247.