Bone bonding strength of sputtered hydroxyapatite films subjected to a low temperature hydrothermal treatment

Bio-Medical Materials and Engineering

Volumn 13, Issue 4, 2003, Pages 451-463

  Ozeki, K ^a   Mishima, A ^b   Yuhta, T ^a   Fukui, Y ^a   Aoki, H ^a  

^a TOKYO DENKI UNIVERSITY   (Japan)

^b Iwamizawa 7 jo Dental Clinic   (Japan)

Author keywords

Bone bonding strength; Crystallization; Hydrothermal; Hydroxyapatite; Sputtering

Indexed keywords

BIOFILMS; BONE; COATED MATERIALS; CRYSTALLINE MATERIALS; CRYSTALLIZATION; ENERGY DISPERSIVE SPECTROSCOPY; LOW TEMPERATURE EFFECTS; PHYSIOLOGY; PLASMA SPRAYING; SCANNING ELECTRON MICROSCOPY; SPRAYED COATINGS; SPUTTERING; TITANIUM COMPOUNDS; X RAY DIFFRACTION ANALYSIS;

CRYSTALLITE SIZE;

BIOMEDICAL ENGINEERING;

CALCIUM; HYDROXYAPATITE; PHOSPHORUS; SODIUM CHLORIDE; TITANIUM;

ADHESION; ADOLESCENT; ANIMAL TISSUE; ARTICLE; BONE BONDING STRENGTH; CALCIUM PHOSPHORUS RATIO; CHEMICAL COMPOSITION; CRYSTAL; CRYSTALLIZATION; DEVICE REMOVAL; DISSOLUTION; DOG; FEMUR; FILM; IMMERSION; IMMERSION TEST; IMPLANTATION; LOW TEMPERATURE; LOW TEMPERATURE HYDROTHERMAL TREATMENT; MATERIAL COATING; MATERIALS TESTING; NONHUMAN; PARTICLE SIZE; PLASMA; PLASMA SPRAYING; PRIORITY JOURNAL; PULL OUT TEST; RADIOFREQUENCY; RADIOFREQUENCY SPUTTERING; ROENTGEN SPECTROSCOPY; SCANNING ELECTRON MICROSCOPY; SPUTTER COATING; SURFACE PROPERTY; THICKNESS; X RAY DIFFRACTION;

ANIMALS; CELL ADHESION; COATED MATERIALS, BIOCOMPATIBLE; CRYSTALLIZATION; DOGS; DURAPATITE; EQUIPMENT FAILURE ANALYSIS; FEMUR; HARDNESS; MATERIALS TESTING; MOLECULAR CONFORMATION; PROSTHESIS DESIGN; SURFACE PROPERTIES; TEMPERATURE;

ANIMALIA; CANIS FAMILIARIS;

EID: 0348109452     PISSN: 09592989     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (25)

1. H. Aoki, Medical Applications of Hydroxyapatite, Ishiyaku EuroAmerica, Inc, St. Louis, 1994.
2. H. Aoki, Marvelous Biomaterial Apatite, Ishiyaku Publishers Inc, Tokyo, 1999.
3. K. Hayashi, T. Inadome, H. Tsumura, Y. Nakashima and Y. Sugioka, Effect of surface roughness of hydroxyapatite-coated titanium on the bone-implant interface shear strength, Biomaterials 15 (1994), 1187-1191.
4. M. Ogiso, Y. Yamashita and T. Mastumoto, Comparative push-out test of dense HA implants and HA-coated implants: Findings in a canine study, J. Biomed. Mater. Res. 39 (1998), 364-372.
5. U.M. Gross and J. Mockwitz, Pathomorphology of hydroxyapatite coated wagner cup prostheses in dogs, in: Proceedings of the First International Symposium on Apatite, Mishima, Japan, 1991, pp. 241-246.
6. K. de Groot, J.G.C. Wolke and J.A. Jansen, Calcium phosphate coatings for medical implants, Proc. Inst. Mech. Eng. Part H 212 (1998), 137-147.
7. G. Lewis, Hydroxyapatite-coated bioalloy surfaces: Current status and future challenges, Bio-Med. Mat. Eng. 10 (2000), 157-188.
8. Y. Cao, J. Weng, J. Chen, J. Feng, Z. Yang and X. Zhang, Water vapour-treated hydroxyapatite coatings after plasma spraying and their characteristics, Biomaterials 17 (1996), 419-424.
9. R.V. Stuart, Vacuum Technology, Thin Film and Sputtering, Academic Press Inc., New York, 1983.
10. K. Ozeki, T. Yuhta, H. Aoki, I. Nishimura and Y. Fukui, Crystal chemistry of hydroxyapatite deposited on titanium by sputtering technique, Bio-Med. Mat. Eng. 10 (2000), 221-227.
11. K. Ozeki, T. Yuhta, Y. Fukui and H. Aoki, Phase composition of sputtered films from a hydroxyapatite target, Surf. Coat. Technol. 160 (2002), 54-61.
12. K. Ozeki, T. Yuhta, H. Aoki, I. Nishimura and Y. Fukui, Push-out strength of hydroxyapatite coated by sputtering technique in bone, Bio-Med. Mater. Eng. 11 (2001), 63-68.
13. K. Ozeki, T. Yuhta, H. Aoki, I. Nishimura and Y. Fukui, A functionally graded titanium/hydroxyapatite film obtained by sputtering, J. Mater. Sci. Mater. Med. 13 (2002), 253-258.
14. E.M. Burke, J.D. Haman, J.J. Weimer, A.B. Cheney, J.M. Rigsbee and L.C. Lucas, Influence of coating strain on calcium phosphate thin-film dissolution, J. Biomed. Mater. Res. 57 (2001), 41-47.
15. J.G.C. Wolke, K. de Groot and J.A. Jansen, In vivo dissolution behaviour of various RF magnetron sputtered Ca-P coatings, J. Biomed. Mater. Res. 39 (1998), 524-530.
16. K. van Dilk, H.G. Schaeken, J.G.C. Wolke and J.A. Jansen, Influence of annealing temperature on RF magnetron sputtered calcium phosphate coatings, Biomaterials 17 (1996), 405-410.
17. L.C. Lucas, W.R. Lacefield, J.L. Ong and R.Y. Whitehead, Calcium phosphate coatings for medical and dental implants, Colloids and Surface A 77 (1993), 141-147.
18. M. Yoshinari, T. Hayakawa, J.G.C. Wolke, K. Nemoto and J.A. Jansen, Influence of rapid heating with infrared radiation on RF magnetron-sputtered calcium phosphate coatings, J. Biomed. Mater. Res. 37 (1997), 60-67.
19. M. Higashikata, O. Hayashi, M. Yoshizawa, Y. Ukegawa, Y. Kuroyama, Y. Tsutsumi, M. Akao and H. Aoki, Characterization of hydroxyapatite coating obtained by hydrothermal transformation of plasma-sprayed α-tricalcium phosphate, in: Proceedings of the First International Symposium on Apatite, Mishima, Japan, 1991, pp. 145-150.
20. Y. Satoh, H. Aoki and T. Satoh, Calcification of artificial enamel in artificial saliva containing calcium ion, PhD thesis, Nippon Dental University, Tokyo, 2003.
21. H. Takadama, H. Kim, T. Kokubo and T. Nakamura, An X-ray photoelectron spectroscopy study of the process of apatite formation on bioactive titanium metal, J. Biomed. Mater. Res. 55 (2001), 185-193.
22. H. Takadama, H. Kim, T. Kokubo and T. Nakamura, TEM-EDX study of the mechanism of bonelike apatite formation on bioactive titanium metal in stimulated body fluid, J. Biomed. Mater. Res. 55 (2001), 441-448.
23. T. Li, J. Lee, T. Kobayashi and H. Aoki, Hydroxyapatite coating by dipping method, and bone bonding strength, J. Mater. Sci. Mater Med. 7 (1996), 355-357.
24. S. Hasegawa, K. Furuya, Y. Ukegawa, M. Fushimi, H. Aoki, M. Akao, M. Higashikata, T. Shimanune and M. Hosonuma, Osteocompatibility of hydroxyapatite-coated titanium by thermal decomposition method, in: Proceedings of the First International Symposium on Apatite, Mishima, Japan, 1991, pp. 259-266.
25. K. Søballe, E.S. Hansen, H.B. Brockstedt-Rasmussen and C. Bünger, Hydroxyapatite coating converts fibrous tissue to bone around loaded implants, J. Bone Jt. Surg. 75B (1993), 270-278.