Evaluation of the ITI Morse Taper Implant/Abutment Design with an Internal Modification

International Journal of Oral and Maxillofacial Implants

Volumn 18, Issue 6, 2003, Pages 865-872

  Ding, Thomas A ^a,b   Woody, Ronald D ^a   Higginbottom, Frank L ^a   Miller, Barbara H ^a  

^a BAYLOR COLLEGE OF DENTISTRY   (United States)

^b NONE   (United States)

Author keywords

Biomechanics; Dental abutments; Dental implants; Morse taper

Indexed keywords

ARTICLE; BIOMECHANICS; COMPRESSION; DENTURE; FRACTURE; RADIOGRAPHY; STATISTICAL SIGNIFICANCE; TOOTH IMPLANTATION; TORQUE;

ANALYSIS OF VARIANCE; DENTAL ABUTMENTS; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; PLIABILITY; STRESS, MECHANICAL; SURFACE PROPERTIES; TORQUE; WEIGHT-BEARING;

EID: 0347418235     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (32)

1. Adell A, Lekholm U, Rocker B, Brånemark P-I. A fifteen-year study of osseointegrated implants in the treatment of the edentulous jaw. Int J Oral Maxillofac Surg 1981;10:387-416.
2. Jemt T, Linden B, Lekholm U. Failures and complications in 127 consecutively placed fixed partial prostheses supported by Brånemark implants: From prosthetic treatment to the first annual checkup. Int J Oral Maxillofac Implants 1992;7:40-44.
3. Levine RA, Clem DS, Wilson TG Jr, Higginbottom F, Solnit G. Multicenter retrospective analysis of the ITI Implant System used for single-tooth replacements: Results of loading for 2 or more years. Int J Oral Maxillofac Implants 1999; 14:516-520.
4. Jemt T, Laney WR, Harris D, et al. Osseointegrated implants for single tooth replacement: A 1-year report from a multicenter prospective study. Int J Oral Maxillofac Implants 1991; 6:29-36.
5. Becker W, Becker BE. Replacement of maxillary and mandibular molars with single endosseous implant restorations: A retrospective study. J Prosthet Dent 1995;74:51-55.
6. Levine RA, Clem DS, Wilson TG Jr, Higginbottom F, Saunders SI. A multicenter retrospective analysis of the ITI Implant System used for single-tooth replacement: Preliminary results at 6 or more months of loading. Int J Oral Maxillofac Implants 1997;12:237-242.
7. Brunski JB. Biomechanics of oral implants. J Dent Educ 1988;52:775-787.
8. Skalak R. Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent 1983;49:843-848.
9. McGlumphy EA, Robinson DA, Mendel DA. Implant superstructures: A comparison of ultimate failure force. Int J Oral Maxillofac Implants 1992;7:35-39.
10. Walton JN, MacEntee MI. A prospective study on the maintenance of implant prostheses in private practice. Int J Prosthodont 1997;10:453-458.
11. Haas R, Mensdorff-Pouilly N, Mailath G, Watzek G. Brånemark single-tooth implants: A preliminary report of 76 implants. J Prosthet Dent 1995;73:274-279.
12. Martin WC, Woody RD, Miller BH, Miller AW. Implant abutment screw rotations preload for four different screw materials and surfaces. J Prosthet Dent 2001;86:24-32.
13. Boggan RS, Strong JT, Misch CE, Bidez MW. Influence of hex geometry and prosthetic table width on static and fatigue strength of dental implants. J Prosthet Dent 1999;82: 436-440.
14. McGlumphy EA, Mendel DA, Holloway JA. Implant screw mechanics. Dent Clin North Am 1998;42:71-89.
15. Norton MR. An in vitro evaluation of the strength of an internal conical interface compared to a butt joint interface in implant design. Clin Oral Implants Res 1997;8:290-298.
16. Binon P. Implants and components: Entering the new millennium. Int J Oral Maxillofac Implants 2000;15:76-94.
17. Jaarda MJ, Razzoog ME, Grattton DG. Effect of preload torque on the ultimate tensile strength of implant prosthetic retaining screws. Implant Dent 1994;3:17-21.
18. Haack JE, Sakaguchi RL, Sun T, Coffey JP. Elongation and preload stress in dental implant abutment screws. Int J Oral Maxillofac Implants 1995;10:529-535.
19. Sakaguchi RL, Borgersen SE. Nonlinear contact analysis of preload in dental implant screws. Int J Oral Maxillofac Implants 1995;10:295-302.
20. Patterson EA, Johns RB. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants 1992;7:26-34.
21. Jorneus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants 1992;7:535-359.
22. Sutter F, Weber HP, Sorensen J, Belser V. The new restorative concept of the ITI dental implant system: Design and engineering. Int J Periodontics Restorative Dent 1993;5: 409-432.
23. Norton MR. Assessment of cold welding properties of the internal conical interface of two commercially available implant systems. J Prosthet Dent 1999;81:159-166.
24. Scacchi M. The development of the ITI Dental Implant System. Part 1: A review of the literature. Clin Oral Implants Res 2000;11(suppl):8-21.
25. Wiscott HWA, Belser U. Mechanical resistance of cemented post and core build-ups for ITI Bonefit implants. Clin Oral Implants Res 1992;3:128-135.
26. Scacchi M, Merz BR, Schär AR. The development of the ITI Dental Implant System. Part 2: 1998-2000: Steps into the next millennium. Clin Oral Implants Res 2000;11(suppl): 22-32.
27. Schar AR, Merz BR. Mechanics of the SynOcta Implant/ Abutment Connection. Waldenburg, Switzerland: Institut Straumann AG, 1999.
28. Merz BR, Hunenbart S, Belser U. Mechanics of the implant-abutment connection: An 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000;15:519-526.
29. Squier RS, Psoter WJ, Taylor TD. Removal torques of conical, tapered implant abutments: The effects of anodization and reduction of surface area. Int J Oral Maxillofac Implants 2002;17:24-27.
30. Gibbs CH, Mahan PE, Mauderli A, Lundeen HC, Walsh EK. Limits of human bite strength. J Prosthet Dent 1986; 56:226-229.
31. Gibbs CH, Mahan PE, Lundeen HC, Brehnan K, Walsh EK, Holbrook WB. Occlusal forces during chewing and swallowing as measured by sound transmission. J Prosthet Dent 1981;46:443-449.
32. Craig RG. Restorative Dental Materials, ed 6. St Louis: Mosby, 1980:60-61.