The Role of Mould Fluxes in Continuous Casting - So Simple Yet So Complex

ISIJ International

Volumn 43, Issue 10, 2003, Pages 1479-1486

  Mills, Kenneth C ^a   Fox, Alistair B ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Causes of defects; Heat transfer; Metal flow; Mould fluxes; Physical properties; Powder consumption

Indexed keywords

CRYSTALLIZATION; HEAT FLUX; HEAT TRANSFER; MOLDS; OXIDATION; SLAGS; SOLIDIFICATION; THERMAL INSULATION; TURBULENT FLOW; VISCOSITY;

METAL FLOW; MOULD FLUXES; STEEL GRADES;

CONTINUOUS CASTING;

EID: 0346959802     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.43.1479     Document Type: Review

References (63)

1. M. V. Fonseca and O. D. C. Afrange; Proc. 5th Int. Conf. on Molten Slags, Fluxes and Salts, ISS, Warrendale, PA, (1997), 851.
2. R. J. O'Malley and J. Neal: Int. Conf. New Developments in Metallurgical Process Technol., METEC Conf., VDEh, Düsseldorf, (1999), 73.
3. M. S. Jenkins and B. Thomas: cited in MS Jenkins, Ph. D. Thesis, Heat Transfer in the Continuous Casting Mould., Monash Univ., Clayton, Vic., Australia, (1999).
4. T. J. H Billany, A. S. Normanton, K. C. Mills and P. Grieveson: Ironmaking Steelmaking, 18 (1991), 403.
5. S. Ogibayashi: Int. Workshop on Thermophys. Data for the Development of Mathematical Models of Solidification, Gifu City, Japan, (1995).
6. M. Wolf: AIME Electr. Furn. Proc., 40 (1982), 335.
7. S. Ogibayashi et al.: Nippon Steel Tech, Rep., 34 (1987), 1.
8. M. Wolf: 2nd Europ. Conf. Cont. Casting, Düsseldorf, (1994).
9. M. Wolf: Effects of Mould Oscillation, Discuss. Group on Continuous Casting Mould Fluxes., The Metals Society, London, UK, (1984).
10. O. D. Kwon et al.: Proc. 74th Steelmaking Conf., ISS, Warrendale, PA, (1991), 561.
11. H. Maeda, T. Hirose, M. Nakada, H. Mori and M. Komatsu: CAMP-ISIJ, 6 (1993), 280.
12. K. Nakajima, S. Hiraki, T. Kanazawa and T. Murakami: CAMP-ISIJ, 5(1992), 1221.
13. S. Sridhar, K. C. Mills, V. Ludlow and S. T. Mallaband: Proc. 3rd Europ. Conf. Cont. Casting, Madrid, (1998).
14. M. S. Jenkins: Ph. D. Thesis, Monash Univ., Clayton, Vic., Australia, (1999).
15. Y. Itoh et al.: 6th Int. Conf. Molten Slags, Fluxes and Salts, KTH, Stockholm, Sweden, (2000).
16. K. Tsutsumi, H. Murakami, S. Nishioka, M. Tada, M. Nakada and M. Komatsu: Tetsu-to-Hagané, 84 (1998), 617.
17. S. Itoyama and N. Bessho: CAMP-ISIJ, 14 (2001), 893.
18. K. C. Mills, A. B. Fox, S. Sridhar and P. D. Lee: Proc. 2nd Int. Conf. Science and Technol. Steelmaking, IOM, London, (2001), 445.
19. A. B. Fox, K. C. Mills, S. Sridhar and P. D. Lee: Proc. 85th Steelmaking Conf., ISS, Warrendale, PA, (2002).
20. F. Neumann et al.: Proc. 79th Steelmaking Conf., ISS, Warrendale, PA, (1996), 86.
21. R. Taylor and K. C. Mills: Ironmaking Steelmaking, 15 (1988), 187.
22. J. W. Cho, T. Emi, H. Shibata and M. Suzuki: ISIJ Int., 38 (1998), 844.
23. A. Yamauchi: Ph. D. Thesis, KTH, Stockholm, (2001).
24. S. Singh and K. E. Blazek: J. Met., 26 (1974), No. 10, 17.
25. M. J. Lu: Proc. 76th Steelmaking Conf., ISS, Warrendale, PA, (1993), 343.
26. T. Iida et al.: J. High Temp. Soc. Jpn., 25 (2000), No. 3, 91.
27. S. Sridhar, K. C. Mills et al.: Ironmaking Steelmaking, 27 (2000), 238.
28. D. Gotthelf et al.: Proc. 3rd Europ. Conf. Cont. Casting, (1998), 825.
29. A. D. Harvey, T. Lucas and E. A. Winder: Proc. 3rd Europ. Conf. Cont. Casting, (1998), 769.
30. H. Tai et al.: Proc. 3rd Europ. Conf. Cont. Casting, (1998), 447.
31. S. Feldbauer and A. W. Cramb: Proc. 78th Steelmaking Conf., ISS, Warrendale, PA, (1994).
32. A. Kusano, N. Sato et al.: Proc. 74th Steelmaking Conf., ISS, Warrendale, PA, (1991), 203.
33. M. Tani et al.: Proc. 4th Europ. Conf. Cont. Casting, IOM, London, (2002), 39.
34. S. Yokoya et al.: Proc. 4th Europ. Conf. Cont. Casting, IOM, London, (2002).
35. P. Courbe, Y. Le Papillon and P. Naveau: Proc. ECSC Workshop, Influence of Solidification Phenomena on Quality Aspects of CC Semi Products, Luxembourg, (2002).
36. N. Sano and Y. Ogawa: Proc. of Brimacombe Symp., ed. by G. A. Irons and A. W. Cramb, Met. Soc., (CIM), (2000).
37. K. C. Mills and A. B. Fox: Proc. 4th Europ. Conf. Cont. Casting, IOM, London, (2002), 345.
38. S. Sridhar et al.: Ironmaking Steelmaking, 27 (2000), 239.
39. J. W. Kim et al.: Proc. 4th Int. Conf. on Molten Slags and Fluxes, ISIJ, Tokyo, (1992), 468.
40. Y. Sugitani et al.: Trans Iron Steel Inst. Jpn., 25 (1985), 91.
41. D. Stewart et al.: Proc. 79th Steelmaking Conf., ISS, Warrendale, PA, (1996), 207.
42. S. Ogibayashi et al.: Proc. 78th Steelmaking Conf., ISS, Warrendale, PA, (1995).
43. H. Tai et al.: 3rd Europ. Conf. Cont. Casting, (1998), 447.
44. G. Skoczylas: Proc. Steelmaking Conf., ISS, Warrendale, PA, (1996), 269.
45. R. Bommaraju: Proc. 75th Steelmaking Conf., ISS, Warrendale, PA, (1992), 22.
46. Y. Fukuda et al.: Proc. 5th Int. Conf. Molten Slags, Fluxes and Salts, ISS, Warrendale, PA, (1997) 791.
47. S. Ogibayashi: Int. Workshop Thermophys. Data for the Development of Mathematical Models of Solidification, Gifu Japan, (1995).
48. M. Nicco et al.: Proc. 3rd Europ. Cont. Continuous Casting, (1998), 817.
49. K. C. Mills and T. H. Billany: Ironmaking Steelmaking, 18 (1991), 258.
50. M. Mukai et al.: Trans. Iron Steel Inst. Jpn., 26 (1986), No. 4, B163.
51. H. Nakato et al.: Continuous Casting., ISS, Warrendale, PA, (1992), 193.
52. S. Feldbauer, A. W. Cramb et al.: Proc. 78th Steelmaking Conf., ISS, Warrendale, PA, (1994), 655.
53. T. Tsukaguchi et al.: Steel Technol. Int., (1995/6).
54. H. Take et al.: Quality Improvement Technol. for Ordinary Steel in Iron- and Steelmaking, Bangkok, Thailand, Session 4, (1994), paper 1.
55. J. Knoepke, M. Hubbard and J. Kelly: Proc. 78th Steelmaking Conf., ISS, Warrendale, PA, (1994), 381.
56. S. Chakraborty and S. Hill: Proc. 78th Steelmaking Conf., ISS, Warrendale, PA, (1994), 291.
57. J. W. Kim et al.: Proc. 78th Steelmaking Conf., ISS, Warrendale, PA, (1995), 333.
58. M. S. Jenkins, B. G. Thomas et al.: 77th Steelmaking Conf., ISS, Warrendale, PA, (1994), 337.
59. M. S. Jenkins, B. G. Thomas et al.: Proc. 80th Steelmaking Conf., ISS, Warrendale, PA, (1997).
60. B. G. Thomas et al.: Process Technol. Conf. Proc, Nashville, TN., (1996), 143.
61. C. Lefevre et al.: Rev. Métall, Can. Inf. Tech., (1997), 489.
62. Y. Nakamura, T. Ando, M. Ikeda and K. Kurata: Trans Iron Steel Inst. Jpn., 26 (1986), 1052.
63. K. Mukai et al.: Taikabutsu (Refractories), 42 (1990), 710.