Thermo-analysis of fly ash and other particulate materials for predicting stable filtration of hot gases

Advanced Powder Technology

Volumn 14, Issue 6, 2003, Pages 631-655

  Hemmer, Gunnar ^a   Hoff, Detlev ^a   Kasper, Gerhard ^a  

^a UNIVERSITY OF KARLSRUHE   (Germany)

Author keywords

Ash properties; Ceramic filters; Gas filtration; Hot gases; Thermo analysis

Indexed keywords

BIOMASS; DIFFERENTIAL SCANNING CALORIMETRY; FILTRATION; GASES; HEAT FLUX; PARTICLE SIZE ANALYSIS; THERMAL EXPANSION; THERMOANALYSIS;

CALCIUM CARBONATE; SODIUM BICARBONATE; SODIUM SULFATE;

FLY ASH;

EID: 0346868991     PISSN: 09218831     EISSN: None     Source Type: Journal    
DOI: 10.1163/15685520360731954     Document Type: Article

References (18)

1. 2 or HCl) with a ceramic filter by addition of dry sorbents, in: Proc. 5th Int. Symp. on Gas Cleaning at High Temperatures, Morgantown (2002).
2. A. Dittler and H. Umhauer, The influence of conditioning and regeneration on the separation behavior of rigid surface filters for the separation of particles from gases. Powder Technol. 120, 223-231 (2002).
3. G. Hemmer, Combined removal of dusts and gaseous contaminants in biomass combustion systems, Dissertation, University of Karlsruhe (2001) (in German).
4. J. P. Hurley, T. M. Strobel and B. A. Dockter, Hot gas filter ash characterization, in: Proc. Adv. Coal-Fired Power System Review Meeting, Morgantown (1995).
5. J. W. Nowok, J. P. Hurley and S. A. Benson, The role of physical factors in mass transport during sintering of coal ashes and deposit deformation near the temperature of glass transformation, Fuel Proc. Technol. 56, 89-101 (1998).
6. M. A. Alvin, Characterization of ash and char formation in advanced high temperature particulate filtration systems, Fuel Proc. Technol. 44, 237-283 (1995).
7. S. J. Miller, D. L. Laudal and M. K. Heidt, Fly ash characterization methods for prediction of fabric filter performance, in: Partec Proc. 92, pp. 229-241 (1992).
8. T. Pilz, Particle properties relevant for hot gas cleaning with rigid barrier filters and their characterization at high temperatures, in: Proc. 3rd Int. Symp. on Gas Cleaning at High Temperatures, Karlsruhe, pp. 132-144 (1996).
9. H. Kamiya, A. Kimura, M. Tsukada and M. Naito, Analysis of the high-temperature cohesion behavior of ash particles using pure silica powders coated with alkali metals, Energy and Fuels 16, 457-461 (2002).
10. C. Kanaoka, M. Hata and H. Makino, Measurement of adhesive force of coal ash particles at high temperatures and different gas compositions, Powder Technol. 118, 107-112 (2001).
11. W. Duo, J. P. K. Seville and R. Clift, Patchy cleaning of rigid gas filters - I. A probabilistic model, Chem. Engng Sci. 52, 141-151 (1997).
12. J. P. K. Seville, W. Cheung and R. Clift, A patchy cleaning interpretation of dust cake release from non-woven fabrics, Filtration and Separation 26, 187-190 (1989).
13. A. Dittler, Gas cleaning with rigid surface filter elements - form and effects of incomplete regeneration, Dissertation, University of Karlsruhe (2001) (in German).
14. M. V. Ferer, A. Dittler, G. Kasper and D. H. Smith, The transient regeneration in the patchy cleaning of rigid gas filters - comparison of modeling to experiment, in: Proc. 5th Int. Symp. on Gas Cleaning at High Temperatures, Morgantown (2002).
15. A. Dittler and G. Kasper, Measurement of local frequencies of filter regeneration and their effect on successive operating cycles, in: Proc. 5th Int. Symp. on Gas Cleaning at High Temperatures, Morgantown (2002).
16. G. Hemmer, J. Wang, G. Kasper and G. Schaub, Combined dry removal of particles and gaseous pollutants from biomass combustion off-gases - investigations with model gases and particles, In: Proc. 4th Int. Symp. on Gas Cleaning at High Temperatures, Karlsruhe, pp. 602-611 (1999).
17. A. Dittler and G. Kasper, Continuous dosage and dispersion of fine, cohesive powders with a new dust feeder, Chemie Ing. Technik 71, 685-688 (1999) (in German).
18. H. Kamiya, Y. Sekiya and M. Horio, Thermal stress fracture of rigid ceramic filter due to char combustion in collected dust layer on filter surface, Powder Technol. 115, 139-145 (2001).