Simulation of Highly Ductile Fiber-Reinforced Cement-Based Composite Components Under Cyclic Loading

ACI Structural Journal

Volumn 100, Issue 6, 2003, Pages 749-757

  Han, Tong Seok ^a   Feenstra, Peter H ^b   Billington, Sarah L ^c  

^a School of Operations Research and Industrial Engineering   (United States)

^b STANFORD UNIVERSITY   (United States)

^c Stanford University   (United States)

Author keywords

Composites; Ductility; Fiber reinforced concrete; Finite element

Indexed keywords

CRACKING STRESS; FIBER REINFORCED CONCRETE;

COMPUTER SIMULATION; CRACK INITIATION; CYCLIC LOADS; DUCTILITY; FIBER REINFORCED MATERIALS; FINITE ELEMENT METHOD; ITERATIVE METHODS; NUMERICAL METHODS; POISSON RATIO; STRAIN HARDENING; TENSILE STRESS;

CEMENTS;

EID: 0346783188     PISSN: 08893241     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (37)

1. Aveston, J.; Cooper, G. A.; and Kelly, A., 1971, "Single and Multiple Fracture," The Properties of Fibrous Composites, National Physics Laboratory, Guildford, IPC Science and Technology Press, pp. 15-26.
2. Aycardi, L.; Mander, J.; and Reinhom, A., 1992, "Seismic Resistance of Reinforced Concrete Frame Structures Designed Only for Gravity Loads: Part II - Experimental Performance of Subassemblages," Technical Report NCEER-92-0028, NCEER, Buffalo, N.Y.
3. Ayoub, A., and Filippou, F. C., 1998, "Nonlinear Finite-Element Analysis of RC Shear Panels and Walls," Journal of Structural Engineering, ASCE, V. 124, No. 3, pp. 298-308.
4. Ayoub, A., and Filippou, F. C., 1999, "Mixed Formulation of Bond-Slip Problems under Cyclic Loads," Journal of Structural Engineering, ASCE, V. 125, No. 6, pp. 661-671.
5. Balaguru, P. N., and Shah, S. P., 1992, Fiber Reinforced Cement Composites, McGraw-Hill, N. Y., New York, 530 pp.
6. Bracci, J.; Reinhorn, A.; and Mander, J., 1992, "Seismic Resistance of Reinforced Concrete Frame Structures Designed Only for Gravity Loads: Part III - Experimental Performance and Analytical Study of a Structural Model, " Technical Report NCEER-92-0029, NCEER, Buffalo, N.Y.
7. Cope, R. J.; Rao, P. V.; Clark, L. A.; and Noris, P., 1980, "Modeling of Reinforced Concrete Behaviour for Finite Element Analysis of Bridge Slabs," Numerical Methods for Non-Linear Problems, C. Taylor, E. Hinton, and D. R. J. Owen, eds., Pineridge Press, Swansea, UK, pp. 457-470.
8. D'Ambrisi, A., and Filippou, F., 1997, "Correlation Studies on an RC Frame Shaking-Table Specimen," Earthquake Engineering and Structural Dynamics, V. 26, pp. 1021-1040.
9. de Borst, R., 1997, "Fracture in Quasi-Brittle Materials: A Review of Continuum Damage-Based Approaches," Engineering Fracture Mechanics, V. 69, pp. 95-112.
10. de Borst, R., and Nauta, P., 1985, "Non-Orthogonal Cracks in a Smeared Finite Element Model," Engineering Computations, V. 2, pp. 35-46.
11. El-Attar, A.; White, R.; and Gergely, P., 1991, "Shake Table Test of a 1/8 Scale Three-Story Lightly Reinforced Concrete Building," Technical Report NCEER-91-0018, NCEER, Buffalo, N.Y.
12. Feenstra, P. H.; Rots, J. G.; Arnesen, A.; Teigen, J. G.; and Hoiseth, K. V., 1998, "A 3D Constitutive Model for Concrete Based on Co-Rotational Concept," Computational Modelling of Concrete Structures, R. de Borst; N. Bióanió, H. Mang, and G. Meschke, eds., Proceedings of the EURO-C 1998 Conference on Computational Modelling of Concrete Structures, Austria, pp. 13-22.
13. Fischer, G., and Li, V. C., 2003, "Deformation Behavior of FRP Reinforced ECC Flexural Members under Reversed Cyclic Loading Conditioned, " ACI Structural Journal, V. 100, No. 1, Jan.-Feb., pp. 25-35.
14. Foster, S. J.; Budiono, B.; and Gilbert, R. I., 1996, "Rotating Crack Finite Element Model For Reinforced Concrete Structures," Computers & Structures, V. 58, No. 1, pp. 43-50.
15. Han, T.-S.; Feenstra, P. H.; and Billington, S. L., 2002, "Constitutive Model for Highly Ductile Fiber-Reinforced Cementitious Composites," Technical Report 02-04, Cornell University, Ithaca, N.Y.
16. Hannant, D. J., 1978, Fibre Cements and Fibre Concretes, John Wiley & Sons, Chicester, N.Y.
17. Kabele, P.; Takeuchi, S.; Inaba, K.; and Horii, H., 1999, "Performance of Engineered Cementitious Composites in Repair and Retrofit: Analytical Estimates," High Performance Fiber Reinforced Composites (HPFRCC3), H. Reinhardt and A. Naaman, eds., RILEM, pp. 617-627.
18. Kelly, A., 1972, "Reinforcement of Structural Materials by Long Strong Fibers," Metallurgical Transactions, V. 3, No. 9, pp. 2313-2325.
19. Kesner, K. E., 2003, "Development of Seismic Strengthening and Retrofit Strategies for Critical Facilities Using Engineered Cementitious Composite Materials," PhD thesis, Cornell University, Ithaca, N.Y., 337 pp.
20. Kesner, K. E., and Billington, S. L., 2001, "Investigation of Ductile Cement Based Composites for Seismic Strengthening and Retrofit," Fracture Mechanics of Concrete Structures, R. de Borst, J. Mazars, G. Pijaudier-Cabot, and J. van Mier, eds., Proceedings of the Fourth International Conference on Fracture Mechanics of Concrete and Concrete Structures, Cachan, France, May-June, pp. 65-72.
21. Kwan, W.-P., and Billington, S. L., 2001, "Simulation of Structural Concrete under Cyclic Load," Journal of Structural Engineering, ASCE, V. 127, No. 12, pp. 1391-1401.
22. Lee, J., and Fenves, G. L., 1998, "A Plastic-Damage Concrete Model for Earthquake Analysis of Dams," Earthquake Engineering and Structural Dynamics, V. 27, pp. 937-956.
23. Li, V. C., 1998, "Engineered Cementitious Composites - Tailored Composites through Micromechanical Modeling," Fiber Reinforced Concrete: Present and the Future, N. Banthia, A. Bentur, and A. Mufti, eds., Canadian Society for Civil Engineering, Montreal, pp. 64-97.
24. Li, V. C., and Leung, C., 1992, "Steady-State and Multiple Cracking of Short Random Fiber Composites," Journal of Engineering Mechanics, V. 118, No. 11, pp. 2246-2264.
25. Majumdar, A. J., 1970, "Glass Fibre Reinforced Cement and Gypsum Products," Proceedings of Royal Society, London, V. 319, pp. 69-78.
26. Marshall, D. B., and Cox, B., 1988, "A J-Integral Method for Calculating Steady-State Matrix Cracking Stresses in Composites," Mechanics of Materials, V. 7, pp. 127-133.
27. Marshall, D. B.; Cox, B.; and Evans, A., 1985, "The Mechanics of Matrix Cracking in BrittleMatrix Composites," Acta Metallographa, V. 33, No. 11, pp. 2013-2021.
28. Meschke, G.; Lackner, R.; and Mang, H. A., 1998, "An Anisotropic Elastoplastic-Damage Model for Plain Concrete," International Journal for Numerical Methods in Engineering, V. 42, pp. 703-727.
29. Rossi, P., 1997, "High Performance Multimodal Fiber Reinforced Cement Composites (HPMFRCC): The LCPC Experience," ACI Materials Journal, V. 94, No. 6, Nov.-Dec., pp. 478-483.
30. Rots, J., 1988, "Computational Modeling of Concrete Fracture," PhD thesis, Delft University of Technology, Delft, The Netherlands, 132 pp.
31. Selby, R. G., and Vecchio, F. J., 1993, "Three-Dimensional Constitutive Relations for Reinforced Concrete," Technical Report 93-02, Department of Civil Engineering, University of Toronto, Ontario, Canada, Nov.
32. Shahrooz, B. M., and Moehle, J. P., 1987, "Experimental Study of Seismic Response of R.C. Setback Buildings," Technical Report UCBJEERC-87/16, EERC, Berkeley, Calif.
33. Simo, J. C., and Ju, J. W., 1987a, "Strain- and Stress-Based Continuum Damage Models - I. Formulation," International Journal for Solids and Structures, V. 23, No. 7, pp. 821-840.
34. Simo, J. C., and Ju, J. W., 1987b, "Strain- and Stress-Based Continuum Damage Models - II. Computational Aspects," International Journal for Solids and Structures, V. 23, No. 7, pp. 841-869.
35. Stevens, N. J.; Uzumeri, S. M.; Collins, M. P.; and Will, G. T., 1991, "Constitutive Model for Reinforced Concrete Finite Element Analysis," ACI Structural Journal, V. 88, No. 1, Jan.-Feb., pp. 49-59.
36. Vecchio, F. J., 1999, "Towards Cyclic Load Modeling of Reinforced Concrete," ACI Structural Journal, V. 96, No. 2, Mar.-Apr. pp. 193-202.
37. Yoon, J. K., and Billington, S. L., 2002, "Experimental and Numerical Studies of Precast Unbonded Post-Tensioned Bridge Columns with Engineered Cementitious Composites," Technical Report 02-03, Cornell University, Ithaca, N.Y.