Properties of Cast Composites

Key Engineering Materials

Volumn 151-152, Issue , 1998, Pages 351-398

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0346338397     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (173)

1. T.W. Clyne and P.J. Withers, An Introduction to Metal-Matrix Composites, Cambridge University Press, Cambridge, England, 1993.
2. K.K. Chawla, Composite Materials-Science and Engineering, Springer Verlag, New York, 1987.
3. J.E. Allison and J.W. Jones, in Fundamentals of Metal-Matrix Composites, S. Suresh, A. Mortensen and A. Needlemann, eds., Butterworth-Heinemann, London, 1993.
4. M. Taya and R.J. Arsenault, Metal Matrix Composites - Thermomechanical Behavior, Pergamon Press, New York, 1989.
5. S.V. Nair, J.K. Tien and R.C. Bates, Int. Metals Revs., 30(6), 1985, 275.
6. K.K. Chawla, in Mater. Sci. Tech., vol. 13, VCH Publ., Anheim, 1993, 121.
7. G. Frommeyer, in Physical Metallurgy, 3rd edition, R.W. Cahn and P. Haasen, eds., Elsevier Sci. Publ., BV 1983, 1854.
8. M.F. Ashby, Acta Metall. Mater., 41(5), 1993, 1313.
9. J.E. Schoutens and D.A. Zarate, Composites, 17(3), 1986, 188.
10. B.S. Majumdar, A.H. Yegneswaran and P.K. Rohatgi, Mater. Sci. Eng., 68, 1984, 85.
11. C. Milliere and M. Suery, in Advanced Materials Research & Development for Transporation Components, I. Lamicq et al, Materials Research Society (MRS-Europe), 1985, 241.
12. F.A. Girot, J.M. Quenisset and R. Naslain, Compos. Sci. Tech., 30, 1987, 155.
13. P.K. Rohatgi, R. Asthana and S. Das, Int. Metals Revs., 31(3), 1986, 115.
14. R. Asthana, R. Tiwari and S.N. Tewari, Metall. Mater. Trans., 26A, 1995, 2175.
15. W.J. Clegg, I. Horsfall, J.F. Mason and L. Edwards, Acta Metall., 36(8), 1988, 2151.
16. S.A. Rickels, J.K. Cochran and T.H. Sanders, Jr., Ceram. Eng. Sci. Proc., 10(9), 1989, 1472.
17. P.K. Rohatgi, R.Q. Guo, H. Iksan, E.J. Borchelt and R. Asthana, Mater. Sci. Eng., (in press).
18. A. Luo, Metall. Mater. Trans., 26A, 1995, 2445.
19. G. Selvadurai, R. Hickman, D. Quinn, D. Richard and D. Rowland, in Interfaces in Metal-Ceramic Composites, R.Y. Lin, R.J. Arsenault, G.P. Martins and S.G. Fishman, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1989, 271.
20. A.H. Nakagawa and M.N. Gungor, in Fundamental Relationships between Microstructure and Mechanical Properties of Metal-Matrix Composites, P.K. Liaw and M.N. Gungor, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1990, 127.
21. A.A. Das, M.M. Yacoub, B. Zantout and A.J. Clegg, Cast Metals,1(2), 1988, 69.
22. A.A. Das, A.J. Clegg and B. Zantout, in Cast Reinforced Metal Composites, S.G. Fishman and A.K. Dhingra, eds., ASM International, Materials Partk, OH, 1988, 217.
23. D.J. Towle and C.M. Friend, Mater. Sci. Eng., A188, 1994, 153.
24. J. Chiou and D.D.L.Chung, in Metal & Ceramic Matrix Composites: Processing, Modeling and Mechanical Behavior, R.B. Bhagat, A.H. Clauer, P. Kumar and A.M. Ritter, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1990, 107.
25. J. Chiou and D.D.L. Chung, J. Mater. Sci., 28, 1993, 1435.
26. T. Suzuki, H. Umehara, R. Hayashi and S.Watanabe, J. Mater. Res., 8(10), 1993, 2492.
27. J.E. Hack, R.A. Page and G.R. Leverant, Metall. Trans., 15A, 1984, 1389.
28. R.A. Page. J.E. Hack, R. Sherman and G.R. Leverant, Metall. Trans., 15A, 1984, 1397.
29. A. McMinn, R.A. Page and W. Wei, Metall. Trans., 18A, 1987, 273.
30. C.M. Friend, J. Mater. Sci., 22, 1987, 3005.
31. P.K. Rohatgi, S. Raman, B.S. Majumdar and A. Banerjee, Mater. Sci. Eng., A123, 1990, 89.
32. M.S. Hu, J. Yang, H.C. Cao, A.G. Evans and R. Mehrabian, Acta Metall. Mater., 40(9), 1992, 2315.
33. T. Erturk, J.A. Cornie and R.G. Dixon, in Interfaces in Metal-Matrix Composites, A.K. Dhingra and S.G. Fishman, eds., AIME-TMS, 1986, 239.
34. T. Lim, Y.H. Kim, C.S. Lee and K.S. Han, J. Compos. Mater., 26(7), 1992, 1062.
35. H. Fukunaga, K. Goda and N. Tabata, Bull. Jpn. Soc. Mech. Engrs., 28(244), 1985, 2224.
36. M.N. Gungor, P.K. Liaw and M.G. Burke, in Cast Reinforced Metal Composites, S.G. Fishman and A.K. Dhingra, eds., American Society for Materials (ASM Int.), 1988, 211.
37. C.M. Lesca, J.A. Cornie, R.B. Friler and A.S. Argon, J. Mater Sci., 28, 1993, 4391.
38. S. Nourbakhsh, W.H. Rhee, O. Sahin and H. Margolin, Metall. Mater. Trans., 25A, 1994, 1259.
39. Y. Kagawa and E. Nakata, J. Mater. Sci. Lett., 11, 1992 176.
40. H.L. Cox, Br. J. Appl. Phys., 3, 1952, 72.
41. V.C. Nadone and K.M. Prewo, Scr. Metall., 20, 1986, 43.
42. B. Derby and J.R. Walker, Scr. Metall., 22, 1988, 529.
43. M.K. Jain D.J. Lloyd and S.P. Tremblay, in Metal & Ceramic Matrix Composites: Processing, Modeling and Mechanical Behavior, R.B. Bhagat, A.H. Clauer, P. Kumar and A.M. Ruter, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1990, 549.
44. M. Taya and R.J. Arsenault, Scr. Metall., 21, 1987, 349.
45. N. Sobczak, J. Sobczak, A. Karmara and S. Dybczak, in Proc. of High Temperature Capillarity, (HTC '94), May 1994, Smolenice, Slovakia.
46. J.L. Mihelich, M.J. Couper and M.J. Lee, SME Conference on Metal-Matrix Composites, Nov 13-14, 1990, SME, Anaheim, CA.
47. A. Magata and I.W. Hall, J.Mater. Sci., 24, 1989, 1959.
48. J.K. Shang and R.O. Ritchie, Acta Metall., 37, 1989, 2267.
49. T.F. Klimowicz, in Cast Metal-Matrix Composites, D.M. Stefanscu and S. Sen, eds., American Foundrymen's Society (AFS), Des Plaines, IL, 1993, 346.
50. M.J. Couper and K. Xia, in Metal-Matrix Composites - Processing, Microstructure and Properties, N. Hanson et al, eds., 1991, 291, Roskilde, Riso National Lab, Denmark.
51. S.V. Kamat, J.P. Hirth and R. Mehrabian, Acta Metall., 37, 1989, 2395.
52. K. Purazrang, K.U. Kainer and B.L. Mordike, Composites, 22(6), 1991, 456.
53. J.J. Stephens, J.P. Lucas, and F.M. Hosking, Scr. Metall., 22, 1988, 1307.
54. J.J. Lewandowski, C. Liu and W.H. Hunt, Jr., Mater. Sci. Eng., A107, 1989,241.
55. U.T.S. Pillai, R.K. Pandey and P.K. Rohatgi, Engr. Fracture Mechanics, 28(4), 1987, 461.
56. W.R. Hoover, J. Compos. Mater., 10, 1976, 106.
57. M. Manoharan, C. Liu and J.J. Lewandowski, in Proc. of International Conference on Fracture (ICF 7), K. Salama, ed., Pergamon Press, Oxford, 1989.
58. M. Nakanishi, Y. Nishida, H. Matsubara, M. Yamada and Y. Tozawa, J. Mater. Sci. Lett., 9, 1990, 470.
59. K. Shanker, L.T. Maropoulos, R.A.L. Drew and P.G. Tsantrizos, Composites, 23(1), 1992, 47.
60. S. Nourbakhsh, O. Sahin, W.H. Rhee and H. Margolin, Metall. Trans., 22A 1991, 3059.
61. J.A. Issacs, F. Taricco, V.J. Michaud and A. Mortensen, Metall. Trans., 22A, 1991, 2853.
62. D.J. Towle and C.M. Friend, J. Mater. Sci., 27, 1992, 2781.
63. J.C. Lee, K.N. Subramanian and Y. Kim, J. Mater. Sci., 29, 1994, 1983.
64. P.K. Ghosh and S. Ray, J. Mater. Sci., 28, 1993, 3783.
65. L. Dignard-Bailey, S. Dionne and S.H. Lo, in Fundamental Relationships Between Microstructure and Mechanical Properties of Metal-Matrix Composites, P.K. Liaw-and M.N. Gungor eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1990, 23.
66. H. Fukunaga, in Cast Reinforced Metal Composites, S.G. Fishman and A.K. Dhingra, eds., American Society for Materials (ASM Int.), 1988, 101.
67. T.M. Liu and C.G. Chao, Mater. Sci. Eng., A169, 1993, 79.
68. Y.H. Kim, S. Lee, N.J. Kim and K. Cho, Scr. Metall. Mater., 31(12), 1994, 1629.
69. S. Towata and S. Yamada, Trans. Japan Inst. Metals, 27(9), 1986, 709.
70. C. McCullough and H. Deve, in Cast Metal-Matrix Composites, D.M. Stefanescu and S. Sen, eds., American Foundrymen's Society (AFS), Des Plaines, IL, 1993, 326
71. R.U. Vaidya, Z.R. Xu, X. Li, K.K. Chawla and A.K. Zurek, J. Mater. Sci., 29, 1994, 2944.
72. M.J. Hadianfard, Y. Mai and J.C. Healy, J. Mater. Sci., 28, 1993, 3665.
73. M. Baumer, in Cast Metal-Matrix Composites, D.M. Stefanescu and S. Sen, eds., American Foundrymen's Society (AFS), Des Plaines, IL, 1993, 263.
74. L. Salvo, G. L'Esperance, M. Suery and J.G. Legoux, Mater. Sci. Eng., A177, 1994, 173.
75. L. Salvo and M. Suery, Mater. Sci. Eng., A177, 1994, 19.
76. H. Ribes and M. Suery, Scr. Metall., 23, 1989, 705.
77. J. Lin, P. Li and R. Wu, Scr. Metall. Mater., 28, 1993, 281.
78. O.P. Modi, A.H. Yegneswaran, R. Asthana and P.K. Rohatgi, J. Mater. Sci., 23, 1988, 83.
79. U.T.S. Pillai, R.K. Pandey, and K.D.P. Nigam, in Proc. of Fifth Int. Conf. Compos. Mater., (ICCM V), San Diego, TMS-AIME, 1985, 895.
80. P.K. Balasubramanian, P.S. Rao, K.G. Sivadasan, K.G. Satyanarayana, B.C. Pai and P.K. Rohatgi, J.Mater. Sci. Lett., 8, 1989, 799.
81. B.W. Bergmann, Z. Metallkde., 70, 1979, 802.
82. E. Yuasa and T. Morooka, 25th Japan Congress on Mater. Res., March 1982, 307.
83. A.P. Divecha, S.G. Fishman and S.D. Karmarkar, J. Metals, 34, 1981, 12.
84. M. Suwa, K. Komuro and K. Sueno, J. Jpn. Soc. Lubr. Engrs., 40, 1976, 1074.
85. G. Wasserman, Z. Metallkde., 64, 1973, 844.
86. V.R. Neuss and G.Wasserman, Z. Metallkde., 64, 1973, 696.
87. P.K. Rohatgi, M.K. Surappa, O.P. Modi and A.H. Yegneswaran, Z. Metallkde., 78(7), 1987, 513.
88. S. Badzioch, R.H. Biddulph, G.K. Greffield, J.B. Martin, R. Thompson and A.J. Wickerns, Composites, Oct. 1978, 278.
89. Z. Xiong, L. Geng and C.K. Yao, Compos. Sci. Tech., 39, 1990, 117.
90. S. Joshi, N. Ramakrishnan, R.C. Chaturvedi and P. Ramakrishnan, in Processing, Properties and Applications of Cast Metal Matrix Composites, P. Rohatgi, The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1996.
91. V.C. Nardone and J.R. Strife, Metall. Trans., 18A, 1987, 109.
92. T.G. Nieh, Metall. Trans., 15A, 1984, 139.
93. T. Morimoto, T. Yamaoka, H. Lilholt and M. Taya, J. Engrg. Materials & Tech. (Trans. ASME), 110, 1988, 70.
94. T. Kyono, E. Kuroda, A. Kitamura, T. Mori and M. Taya, J. Engrg. Mater. Tech.(Trans. ASME), 110, 1988, 89.
95. H. Lilholt, Mater. Sci. Eng., A135, 1991, 161.
96. M. McLean, in Proc. of Fifth Int. Conf. Compos.Mater. (ICCM-V), W.C. Harrigan et al, eds., TMS-AIME, 1986, 37.
97. T.G. Nieh, K. Xia and T.G. Langdon, J. Engrg. Mater. Tech., 110, 1987, 77.
98. T.K. Park, E.J. Lavernia and F.A. Mohamad, in Proc. Fourth Israel Int. Mater. Conf., vol. 9, 1988, 2741.
99. D. Webster, Metall. Trans., 13A, 1982, 1511.
100. D. Nath, R. Narayana and P.K. Rohatgi, J. Mater. Sci., 16, 1981, 3025.
101. P.K. Rohatgi, N. Murali, H.R. Shetty and R. Chandrasekhar, Mater. Sci. Eng., 26, 1976, 115.
102. J. Onuki, K. Soeno and M. Suwa, J. Jpn. Inst. Metals, 43, 1978, 8.
103. M. Suwa, K. Komuro and K. Soeno, J. Jpn. Inst. Metals, 42, 1978, 1034.
104. S.P. Rawal and M.S. Misra, "Interfaces and damping in continuous grahite/aluminum composites", Tech. Report, Martin-Marietta Aerospace, Denver, CO, 1986.
105. M.S. Misra and P.D. LeGreco, "Damping behavior of metal-matrix composites", Vibration Damping-1984 (Workshop Proc.), AFWAL-TR-84-3064, vol. 1, Nov. 1984.
106. M.S. Misra, "Metallurgical characterization of interfaces and the damping mechanisms in metal-matrix composites", Tech. Report AS-Al 69186/R/WS, Martin Marietta Aerospace, Denver CO, April 1986.
107. R.D. Adams and M.A.D. Fox, J. Iron Steel Inst., 211, 1973, 37.
108. R.J. Perez, J. Zhang and E.J. Lavernia, Scr. Metall. Mater., 27, 1992, 1111.
109. A. Sato and R. Mehrabian, Metall. Trans., 7B, 1976, 443.
110. F.M. Hosking, F.F. Portillo, W. Wunderlin and R. Mehrabian, J. Mater. Sci., 17, 1982, 477.
111. Z.C. Feng and K.N. Tandon, Scr. Metall. Mater., 32(4), 1995, 523.
112. Y.M. Pan, M.E. Fine and H.S. Cheng, in Tribol. Trans., 35, 1992, 482.
113. S. Das and S.V. Prasad, in Wear of Materials - 1989, K.C. Ludema, ed., ASME, 1989, 399.
114. S. Das, S.V. Prasad and T.R. Ramachandran, in Fundamental Relationships Between Microstructure and Mechanical Properties of Metal-Matrix Composites, P.K. Liaw and M.N. Gungor, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1990, 655.
115. M.K. Surappa, S.V. Prasad and P.K. Rohatgi, Wear, 77, 1982, 295.
116. S. Biswas and P.K. Rohatgi, Tribology Int., 16(2),1983, 89.
117. K.J. Bhansali and R. Mehrabian, J. Metals, 32, 1982, 30.
118. J. Zhang and A.T. Alpas, Mater. Sci. Eng., A161, 1993, 273.
119. S. Skolianos and T.Z. Kattamis, Mater. Sci. Eng., A163, 1993, 107.
120. S.V. Prasad and P.K. Rohatgi, J. Metals, Nov. 1987, 22.
121. S.V. Prasad, P.K. Rohatgi and T.H. Kosel, Mater. Sci. Eng., 80, 1986, 213.
122. C.A. Caracostas, W.A. Chiou, M.E. Fine and H.S. Cheng, Scr. Metall. Mater., 27, 1992, 167.
123. P.K. Rohatgi, S. Ray and Y. Liu, Int. Mater. Revs., 37(3), 1992, 129.
124. P.K. Rohatgi, Y. Liu, M. Yin, T.L. Barr, Mater. Sci. Eng., A123, 1990, 213.
125. P.K. Rohatgi and B.C. Pai, Wear, 59, 1980, 323.
126. M.A. Taha, N.A. El-Mahallawy, M. Abdel-Hamid and H.A. Hanna, in Cast Metal-Matrix Composites, D.M. Stefanescu and S. Sen, eds., American Foundrymen's Society (AFS), Des Plaines, IL, 1993, 335.
127. S.C. Lim and M.F. Ashby, Acta Mater., 35(1), 1987, 1.
128. P.K. Rohatgi, Y. Liu and R. Asthana, J. Mater. Sci., 26, 1991, 99.
129. P.K. Rohatgi, Y. Liu and R. Asthana, in Tribology of Composites, P. Rohatgi, P.J. Blau ana C.S. Yust, eds., American Society for Materials (ASM Int.), 1990, 69.
130. B.C. Pai, P.K. Rohatgi and S. Venaktesh, Wear, 30(1), 1974, 117.
131. B.N. Keshavaram, P.K. Rohatgi, R. Asthana and K.G. Satyanarayana, in Tribology of Composite Materials, P.K. Rohatgi, P.J. Blau and C.S. Yust, eds., American Society for Materials (ASM Int.), 1990, 133.
132. P.S. Turner, J. Res. NBS, National Bureau of Standards (NIST), 37, 1946, 239.
133. E.H. Kerner, Proc. Phys. Soc., 69, 1956, 808.
134. J. Sadanandam, G. Bhikshamaiah, B. Gopalakrishna, S.V. Suruyanarayana, Y.R. Mahajan ana M.K. Jain, J. Mater. Sci. Lett., 11, 1992, 1518.
135. R.U. Vaidya and K.K. Chawla, Compos. Sci. Tech., 50, 1994, 13.
136. R.A. Schapery, J. Compos. Mater., 2, 1968, 380.
137. C.C Chamis, SAMPE Quarterly, 15, 1984, 14.
138. B.W. Rosen and Z. Hashin, Int. J. Eng. Sci., 8, 1970, 157.
139. D. Masutti, J.P. Lentz and F. Delannay, J. Mater. Sci. Lett., 9, 1990, 340.
140. D.L. Ellis and D.L. McDanels, Metall. Trans., 24A, 1993, 43.
141. D.P.H. Hasselman and L.F. Johnson, J. Compos. Mater., 21, 1987, 508.
142. A.L. Geiger, D.P.H. Hasselman and K.Y. Donaldson, J. Mater. Sci. Lett., 12, 1993, 420.
143. Z. Hashin, J. Compos. Mater., 2, 1968, 284.
144. R.F. Jones and B. Roebuck, J. Mater. Sci. Lett., 1989, 573.
145. "Hitachi Dispersed Cast Alloy - Gradia", Hitachi Chemical Co., Ibaraki, Japan, 1985.
146. M. Suery, C. Milliere and V. Jacob, in Cast Metal-Matrix Composites, D.M. Stefanescu and S. Sen, eds., American Foundrymen's Society (AFS), Des Plaines, IL, 1993, 295.
147. B.K. Prasad, J. Mater. Sci., 28, 1993, 100.
148. G.D. Zhang, S.R. Feng, Q. Li, J.T. Blucher, and J.A. Cornie, in Controlled Interphase Structures (ICCI-III), H. Ishida, ed., Elsevier Sci. Publ., New York, 1990.
149. J.E. Allison and G.S. Cole, JOM, Jan 1993, 19.
150. T.F. Klimowicz, JOM, Nov. 1994, 49.
151. W.R. Hoover, in Cast Metal Matrix Composites, D.M. Stefanescu and S. Sen, eds., American Foundrymen's Society (AFS), Des Plaines, 1993, 1.
152. G.S. Cole, in Cast Metal Matrix Composites, D.M. Stefanescu and S. Sen, eds., American , Foundrymen's Society (AFS), Des Plaines, 1993, 9.
153. A.L. Geiger and M. Jackson, Adv. Mater. Proc., 7, 1989, 23.
154. S. Elomari and D.J. Lloyd in Processing, Properties and Applications of Cast Metal Matrix Composites, P. Rohatgi and P.A. Khan, eds., The Minerals, Metals & Materials Society (TMS), Warrendale, PA, 1996, 201.
155. D.M. Goddard, Metal Prog., April 1984, 49.
156. S. Kumain, J.E. King and J.F. Knott, Fatigue, Fract. Eng. Mater. Struct., 13, 1990, 511.
157. D.J. Lloyd, Int. Mater. Revs., 39(1), 1994, 1.
158. J.A. Cornie, R. Guerriero, L. Meregalli and I. Tangerini, in Cast Reinforced Metal Composites, S.G. Fishman and A.K. Dhingra, eds., ASM International, Materials Park, OH, 1988, 155.
159. W.R. Loue and W.H. Kool, in Cast Reinforced Metal Composites, S.G. Fishman and A.K. Dhingra, eds., ASM International, Materials Park, OH, 1988, 327.
160. Y. Wu and E.J. Lavernia, Scr. Mater., 27, 1992, 173.
161. B.F. Quigley, G.J. Abbaschian, R. Wunderlin and R. Mehrabian, Metall. Trans., 13A, 1982, 93.
162. X. Liu and M. Nilmani, in Processing, Properties and Applications of Cast Metal-Matrix Composites, P. Rohatgi and P.A. Khan, eds., The Minerals, Metals & Materials Society (TMS), 1996.
163. th TMS Annual Meeting, Anaheim, CA), Feb 1990, TMS, 767.
164. F.H. Froes, Mater. Sci. Eng., A184, 1994, 119.
165. F.S. Rois and J.E. Schoutens, J. Mater. Sci., 21, 1986, 2409.
166. D.K. Balch, T.J. Fitzgerald, V.J. Michaud, A. Mortensen and S. Suresh, Metall. Mater. Trans., 27 A, 1996, 3700.
167. C. Zweben, JOM, July 1992, 15.
168. P.G. Partridge and C.M. Ward-Close, Int. Mater. Revs., 1993, 38(1), 1.
169. M.K. Premkumar, W.H. Hunt, Jr., and R.R. Sawtell, JOM, July 1992, 24.
170. J. Doychek, JOM, June 1992, 46.
171. M.R. Piggot, Load Bearing Fiber Composites, Pergamon Press, New York, 1980.
172. C.C. Chamis, in Encyclopaedia of Chemical Technology, 3rd edition, Kirk-Othmer, ed., John Wiley & Sons, 13, 1981, 941.
173. E. Nakata, Y. Kagawa and H. Terao, Rep. Cast Res. Lab., Waseda University, No. 34, 1983, 27.